XPARTCO WE03X29897 Dryer Drum Belt
The XPARTCO WE03X29897 is an aftermarket replacement drum drive belt for GE, Hotpoint, and Kenmore dryers. It is a four-rib belt, approximately 89-1/2 inches long, that wraps around the drum, the tension pulley, and the drive motor pulley, so the motor can turn the drum. A worn, stretched, or broken belt can cause noise, a drum that won't turn, or a dryer that won't start.
This is a direct-fit aftermarket replacement for the original GE belt. Because the drum has to be moved to fit a new belt, it is also a good time to inspect the tension pulley, idler, and drum rollers and replace any that look worn.
Quick Answer
The XPARTCO WE03X29897 Drum Belt fixes a GE, Hotpoint, or Kenmore dryer whose drum won't turn, that makes a noisy thumping or squealing sound, or that won't start because the belt is worn or broken. Classic symptom: the dryer hums or the motor runs, but the drum stays still.
Common Problems This Part Fixes
Drum does not turn although the motor runs
Noisy dryer, with thumping or squealing as the drum turns
Dryer won't start
Heat stays on after the drum has stopped
Visibly stretched, cracked, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drum belt directly replaces the following part numbers:
WE03X29897, WE12M29, WE12X21574, WE21M29, 559C197P001, 559C197P003, 254C1413P002, 3516321, 4 PH 2275, SH210T, 4975431, WE12M0022, WE12M22, WE12M33, 559C197P004, 559C197P005, 559C197P006, WE120122, AGE25601, AP7012633, EAP10065160, PD00074201, PS16542496
These numbers span several generations of GE's own part numbering for this belt. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drum belt is listed for GE, Hotpoint, and Kenmore dryers and washer-dryer combos, including these examples:
GE DBB3300EA0AA, DBLR333EE0CC, DNCK440GG9WC, DWXR473GT5WW
GE DDC4400T3WH, DRSR495EG0WW, DX2300EB1WW, DX4500EG1WW
GE 2661532210 and 3636154241, Kenmore 36371542
Note: The models above are a small sample of a list of hundreds, not a full list. Compare your old belt's length to this one (approximately 89-1/2 inches), and contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket drum drive belt for GE, Hotpoint, and Kenmore dryers
Four-rib design, approximately 89-1/2 inches long
Wraps around the drum, tension pulley, and motor pulley
Resolves drum-not-turning, noise, and no-start problems caused by a worn belt
Straightforward repair, typically 30 minutes to 1 hour
Product Specifications
Part Number
XPWE03X29897
OEM Part Number
WE03X29897
Part Type
Dryer Drum Drive Belt
Condition
Aftermarket Replacement
Belt Length
Approx. 89-1/2 Inches
Belt Profile
4-Rib
Application
GE, Hotpoint & Kenmore Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as internal parts and cabinet edges can be sharp. Remove the top and front panel as shown in your model's service guide, then slide the drum out, which is easier with a second person. Remove the old belt and route the new belt around the drum, the tension pulley, and the motor pulley as the old one ran, then reassemble in reverse order. Check the tension pulley and drum rollers while the drum is out and replace any that are worn.
Frequently Asked Questions
My dryer runs but the drum won't turn. Is this the part I need?
That is the classic sign of a broken drum belt. If the motor runs and you can turn the drum freely by hand, check the belt first.
How long is this belt?
It is approximately 89-1/2 inches long, with four ribs. Small differences are normal, but if your old belt is a very different length, check your model number before ordering.
Should I replace anything else while the drum is out?
Inspect the tension pulley and the drum rollers or glides. These wear along with the belt, and they are much easier to replace now than later.
Will this fit my dryer?
It is listed for hundreds of GE, Hotpoint, and Kenmore dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 8182703 Washer Shock Absorber Replaces WP8182703
The XPARTCO 8182703 is an aftermarket replacement front-load washer shock absorber compatible with select Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, and Roper front-load washers in the GHW, WFW, MHWE, MFW, and KHWS series. The shock absorber is a hydraulic dampener that connects the outer washer tub to the base frame. During the spin cycle, the shock absorbers absorb and dampen the vibrations and movement generated by the spinning drum — keeping the washer stable, quiet, and protecting internal components from damage caused by excessive movement.
Most compatible Whirlpool-family front-load washers use four shock absorbers — two at the front and two at the rear. When one or more shock absorbers wear out, the outer tub vibrates excessively, causing loud banging or thumping during the spin cycle. It is strongly recommended to replace all four shock absorbers at the same time. This listing is for a single shock absorber. It directly replaces WP8182703, 8181646, 1173231, and several additional cross-reference numbers. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 8182703 Washer Shock Absorber fixes front-load washers that shake violently, bang loudly, or walk across the floor during the spin cycle. The shock absorber dampens tub vibration. Most models use 4 shock absorbers — replace all 4 at the same time. Sold individually. Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, and Roper front-load washers. Replaces WP8182703, 8181646, AP6011831, and more.
Common Problems This Part Fixes
Violent shaking or vibrating during the spin cycle
Loud banging, thumping, or clunking noise during spin
Washer "walking" across the floor during the spin cycle
Outer tub hitting the sides of the cabinet during high-speed spin
Spin cycle errors caused by excessive tub movement triggering the imbalance sensor
Visible oil leak, broken mount, or collapsed shock absorber body
Washer repeatedly pausing spin cycle and redistributing the load without resolving the vibration
Replaces Part Numbers
This shock absorber directly replaces the following OEM and cross-reference part numbers:
WP8182703, 8182703, 1173231, 8181646, EAP11745030, AWP48892, PD00003153, AP6011831, PS11745030.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This shock absorber is compatible with select front-load washers from the following brands and series:
Whirlpool front-load washers — GHW and WFW series
Maytag front-load washers — MHWE and MFW series
Kenmore / Sears front-load washers (select Whirlpool-built models)
KitchenAid front-load washers — KHWS series
Amana front-load washers
Jenn-Air front-load washers
Admiral front-load washers
Roper front-load washers
Important: Most compatible models use 4 shock absorbers (2 front, 2 rear). This part is sold individually. It is strongly recommended to replace all 4 at the same time, as the remaining absorbers have experienced the same wear and will fail soon after.
Key Features
Hydraulic dampener that connects the outer washer tub to the base frame — absorbs spin cycle vibration and prevents tub-to-cabinet contact
Keeps the washer stable and quiet during high-speed spin cycles, protecting drum bearings, seals, and cabinet from premature wear
High-quality reinforced construction — excellent toughness, oil resistance, and resistance to weak acids and alkalis for long service life
Direct replacement for WP8182703 and 8181646 — no modification required
Compatible with Whirlpool GHW, WFW, Maytag MHWE, MFW, and KitchenAid KHWS series front-load washers
Sold individually — most models require 4 shock absorbers; replace all 4 at the same time
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
8182703
OEM Part Number
WP8182703
Part Type
Front-Load Washer Shock Absorber (Hydraulic Dampener)
Condition
Aftermarket Replacement
Application
Front-Load Washers
Quantity Per Washer
4 (2 front, 2 rear) — sold individually
Compatible Brands
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, Roper
Compatible Series
GHW, WFW, MHWE, MFW, KHWS
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Unplug the washer and turn off the water supply before beginning. To access the front shock absorbers, remove the lower front access panel. To access the rear shock absorbers, pull the washer away from the wall, disconnect the water hoses, and remove the rear panel. The shock absorbers connect the outer tub to the base frame with mounting pins at the top and bottom — turn the shock absorber 90 degrees at both pins to release and remove it. Install the new 8182703 shock absorber by inserting the pins into the top and bottom mounting brackets and rotating 90 degrees to lock in place. Replace all 4 shock absorbers during the same repair. Reconnect all panels and water hoses, plug in the washer, restore water supply, and run a spin cycle to verify normal operation. Work gloves are recommended as there are sharp edges inside the cabinet. Tools needed: Phillips screwdriver, channel-lock pliers, work gloves.
Frequently Asked Questions
What does the washer shock absorber do?
The shock absorbers are hydraulic dampeners that connect the outer washer tub to the base frame of the machine. During the spin cycle — when the drum spins at high speeds — the shock absorbers absorb and dampen the vibrations and movement of the heavy outer tub, keeping it centered and preventing it from striking the sides of the washer cabinet. Without functioning shock absorbers, the washer vibrates violently, makes loud banging noises, and can "walk" across the floor during spin, potentially damaging internal components over time.
How many shock absorbers does my front-load washer have?
Most Whirlpool-family front-load washers compatible with the 8182703 shock absorber use four shock absorbers — two mounted at the front of the tub and two at the rear. This listing is for a single shock absorber. When replacing shock absorbers, it is strongly recommended to replace all four at once, as they all experience the same amount of use and the remaining absorbers are likely to fail soon after the first one.
What is the difference between 8182703 and WP8182703?
These are the same shock absorber. WP8182703 is the updated Whirlpool OEM part number that superseded the original 8182703. The 8181646 is also a cross-reference to this same part. This aftermarket replacement is compatible with all three numbers.
My washer still vibrates after replacing the shock absorbers — what else could it be?
If vibration persists after replacing all four shock absorbers, other possible causes include an unbalanced or overloaded drum, worn drum bearings, a failing suspension spring, or the washer not being level on the floor. Check that the washer's leveling feet are adjusted so all four corners are in firm contact with the floor. Also confirm the load is not oversized — overloading is the most common cause of spin vibration and can prematurely wear shock absorbers.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from high-quality reinforced materials to match the dimensions and performance of the original WP8182703 shock absorber.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP3347288 Washer Lower Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP3347288, 3347288, 3348245, 3352107, 519233, AP6008022, PS11741151.
Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.
3360629 Washer Transmission Gearcase
Description: The Transmission is an OEM part for Whirlpool washing machines. This integral component is at the heart of the washing machine's operation, translating the motor's power into action by driving the agitator and spinning the drum. Regular inspection and maintenance can prolong the life of the transmission, but if these symptoms occur, it may be time to replace this critical component.
Replaces Part Number: 3360629, W10140307, 285362, 62621, 8546456, W10172898, WP62621, WP8546456, 285194, 285291, 285312, 285392, 285515, 3349296, 3360263, 3360629R, 3360630, 388763, 389229, 389230, 389244, 389246, 3946631, 3947637, 3949609, 423, 62528, 62531, 62534, 62570, 62668, 62680, 63025, 63167, 63320, 63563, 63910, 63999, 8532118, 99890390, 99890391, AH341974, EA341974, AP3096209, PS341974, W10140301, W10140304, W10155438, W10251783, W10251785.
XPARTCO 6501KW2002B Washer Rotor Position Sensor – Compatible with LG and Kenmore Washers
Product Description
Maintain smooth spin cycles and precise motor control with the XPARTCO 6501KW2002B Washer Rotor Position Sensor. This Sensor Assembly, also known as a hall sensor is a replacement Part and is a vital component in Specific LG, Kenmore washer Models. This part monitors the direction and speed of the spinning rotor. It then communicates this information to the electronic control board. By doing so, it aids in the precise operation of your washer. If your washer pumps but fails to spin or agitate, it may be indicative of a damaged sensor assembly.
Replaces Part Numbers
6501KW2002B, 6501KW2002A, AP7015078, PD00073205, EAP16556422, 4962510, PS16556422, EAP16556422.
Compatibility
This replacement rotor position sensor fits select LG and Kenmore front-load washers.
Example compatible models include (but are not limited to): LG WM2487HRM, LG WM0642HW, and Kenmore 796.40272900.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Aftermarket Replacement – Designed to match OEM performance and precision
Accurate Rotor Feedback – Helps regulate motor speed and direction for smooth washing
Cost-Effective Fix – Delivers OEM-level performance at a fraction of the price
Plug-and-Play Installation – No wiring modification required
Fixes Common Issues – Resolves LE, UE, SE, and spin cycle errors
Product Specification
Part Number: 6501KW2002B
Component Type: Washer Rotor Position Sensor (Hall Sensor)
Material: Durable printed circuit board with reinforced plastic housing
Mounting: Direct-fit installation on stator assembly
Operating Conditions: Rated for high-humidity, high-vibration washer environments
Compliance: Built to OEM-equivalent quality standards (not OEM)
Installation Notes
Tools Needed: 10 mm socket wrench, Phillips screwdriver
⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear access panel.
Unscrew the rotor bolt and carefully remove the rotor assembly.
Locate and unplug the old sensor from the stator.
Install the new XPARTCO 6501KW2002B sensor, aligning mounting tabs.
Reconnect the wiring harness, reinstall the rotor, and secure the panel.
Restore power and run a spin test to verify correct operation.
⏱️ Time Required: 20–25 minutes
Shop With Confidence
Trusted Appliance Parts Supplier
30-Day Return Policy
Restore precise washer performance — Add to Cart Now for a reliable, budget-friendly repair!
WH01X24697 Washer Genuine OEM Drive Belt
The WH01X24697 is a genuine GE OEM drive belt for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This belt connects the drive motor to the drive system, transmitting rotation to spin the basket during the wash and spin cycles.
Measures approximately 21" long, made of durable, flexible rubber engineered to reduce slipping and squeaking while withstanding regular tension and wear. Over time, the belt stretches, cracks, or breaks from age and normal use. If your washing machine is making unusual noise, not spinning correctly, or the basket isn't moving, this drive belt may be the cause. It directly replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488. As a genuine OEM part, the WH01X24697 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WH01X24697 Washer Genuine OEM Drive Belt fixes GE, Hotpoint, Haier, Monogram, and Café top-load washers with unusual noise, a basket that won't spin correctly, or a basket that isn't moving at all. Approximately 21" long. Replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488. Not the same as the similarly-numbered WH01X24180 or WH01X27538 belts, which are separate parts used on other GE/Hotpoint models — confirm your exact part number before ordering.
Common Problems This Part Fixes
Basket not spinning or not moving at all
Unusual noise during operation, including squeaking
Basket slipping or spinning inconsistently
Wash cycle running without proper agitation or spin
Belt visibly stretched, cracked, or broken
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive belt directly replaces the following OEM and cross-reference part numbers:
WH01X24697, 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive belt is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform, including model numbers such as GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW330ASK0WW, GTW330ASK1WW, GTW330ASK2WW, GTW460AMJ1WW, GTW460AMJ3WW, GTW460AMJ4WW, GTW460ASJ1WW, GTW460ASJ3WW, GTW460ASJ4WW, GTW460ASJ5WW, GTW460ASJ6WW, GTW460ASJ7WW, HTW200ASK0WW, HTW200ASK1WW, HTW200ASK2WW, HTW240ASK0WS, HTW240ASK1WS, and HTW240ASK2WS.
Note — not the same as WH01X24180 or WH01X27538: These are separate GE/Hotpoint drive belts with their own cross-reference sets, used on different models. The similar numbering makes them easy to confuse. Always verify your exact part number before ordering. Contact our support team with your model number if you're unsure which belt your washer needs.
Key Features
Genuine GE OEM part — factory-specified length and construction
Connects the drive motor to the drive system to spin the basket
Resolves "won't spin," "unusual noise," and "basket not moving" symptoms caused by belt failure
Approximately 21" long
Durable, flexible rubber construction engineered to reduce slipping and squeaking
Direct drop-in replacement matching the original length and profile
Replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Straightforward DIY repair with basic tools
Product Specifications
Part Number
WH01X24697
Part Type
Washer Drive Belt
Condition
Genuine OEM
Length
Approx. 21"
Material
Rubber
Function
Connects the drive motor to the drive system to spin the basket
Repair Difficulty
Easy to Moderate
Quantity
1 drive belt
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Remove the back panel of the washer using a socket wrench set, taking out the securing screws and carefully lifting the panel away. Locate the drive belt near the motor, at the bottom of the washer. Use a screwdriver to loosen the tensioner, then gently slide the old belt off the pulleys. Fit the new WH01X24697 belt around the pulleys in the same path as the old one, then re-tension it with the tensioner. Reinstall the back panel and secure its screws. Restore power and run a test cycle to confirm the basket spins smoothly with no unusual noise. Tools needed: socket wrench set, screwdriver, work gloves.
Frequently Asked Questions
My washer's basket isn't spinning. Is this the belt I need?
Yes, this is one of the most common symptoms of a failed drive belt. Since this belt is what transmits rotation from the drive motor to the basket, a stretched, cracked, or broken belt can leave the motor running while the basket doesn't spin correctly or at all.
Is this a difficult repair?
No, it's a straightforward repair for a confident DIYer with basic tools. It involves removing the back panel to access the belt near the motor, loosening the tensioner, and swapping the belt — no specialized skills required.
Is this the same as WH01X24180 or WH01X27538?
No, these are separate GE/Hotpoint drive belts with their own distinct cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old belt rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original length, material, and pulley fit of the drive belt originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DC31-00098A Washer Rotor Position Sensor
Replaces Parts Numbers: DC31-00098A, 2068316, AP4578642, PS4204673, B084RT6G78
Description: The Washer Rotor Position Sensor ensures precise motor function for your washer. This replacement part accurately detects the rotor's position, enabling smooth and efficient washing cycles. By maintaining optimal motor performance, it helps prevent unexpected interruptions and extends the lifespan of your appliance. Compatible with specific Samsung washer models, this rotor position sensor guarantees a secure fit and reliable operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
Genuine OEM WH01X27538 Washer Drive Belt
The Genuine OEM GE WH01X27538 is a washer drive belt for GE and Hotpoint top-load washers. It is a 5-rib belt with 4 grooves, approximately 22.87 inches long. The belt connects the drive motor to the transmission pulley, so the motor can spin the basket and agitate the clothes. A worn, stretched, or broken belt can cause a washer that won't spin or agitate, a slow spin, squealing, or noise during the cycle.
This is the original GE part. Belts differ between washer families, so check the part number against your model before ordering.
Quick Answer
The Genuine OEM WH01X27538 Drive Belt fixes a GE or Hotpoint top-load washer that won't spin or agitate, spins slowly, or squeals or makes noise because the drive belt is worn or broken. Classic symptom: the motor runs, but the basket or agitator doesn't turn.
Common Problems This Part Fixes
Motor runs but the basket or agitator doesn't turn
Washer won't spin or agitate
Slow spin or poor wash performance
Squealing or noise during the cycle
Visibly worn, cracked, stretched, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drive belt directly replaces the following part number:
WH01X27538, replaces 290D1101P005, 4587903, 5PJ 586 SJ 161, AGE25699, AP6328256, OEM18984777, PD00043350, PS12299369
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drive belt is listed for GE and Hotpoint top-load washers, including these examples:
GE GTW220ACK4WW, GTW220ACK5WW, GTW330ASK4WW, GTW335ASN1WW
GE GTW460ASJ8WW, GTW460ASJ9WW, GTW460ASJAWW
Hotpoint HTW200ASK3WW, HTW240ASK5WS, HTW240ASK6WS
Note: The models above are a small sample, not a full list. Washer belts differ between families, so compare your old belt to this one (approximately 22.87 inches, 5 ribs) and check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE drive belt for GE and Hotpoint top-load washers
5-rib, 4-groove design, approximately 22.87 inches long
Connects the drive motor to the transmission pulley
Resolves no-spin, no-agitate, and noise problems caused by a worn belt
Typically a 30 minute to 1 hour repair
Product Specifications
Part Number
WH01X27538
OEM Part Number
WH01X27538
Part Type
Washer Drive Belt
Condition
Genuine OEM
Belt Length
Approx. 22.87 Inches
Belt Profile
5-Rib, 4-Groove
Application
GE & Hotpoint Top-Load Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Access to the belt depends on your model, so follow its service guide to reach the motor and pulleys. Note how the old belt is routed, remove it, and fit the new belt on the same pulleys. Check that it is seated in the pulley grooves before reassembling.
Frequently Asked Questions
My washer motor runs but the basket won't turn. Is this the part I need?
A broken or slipping drive belt is a common cause. If the belt looks worn, cracked, or loose, replacing it is a good first step.
How long is this belt?
It is approximately 22.87 inches long, with 5 ribs and 4 grooves. If your old belt is a very different length or has a different number of ribs, check your model number before ordering.
Is this a top-load or front-load part?
It is listed for GE and Hotpoint top-load washers. If you are unsure which belt your washer uses, check your model number or contact our support team.
Is this an easy repair?
Retailers list it at roughly 30 minutes to 1 hour, though it depends on your model. Follow your model's service guide to reach the motor and pulleys.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10677723PL Washer Motor Pulley - Compatible with Whirlpool, Maytag, Kenmore, Crosley Washer Motor W10677723
Product Description
Restore smooth operation to your washer with the replacement XPARTCO W10677723PL Washer Motor Pulley. This replacement motor pulley is designed for select Whirlpool, Maytag, Kenmore, and Crosley top-load washers, connecting the motor to the transmission for efficient power transfer. It addresses issues like excessive noise, belt slippage, or failure to spin, offering a cost-effective alternative to OEM parts.
Note: Includes one motor pulley (2-5/16" diameter, 4 ribs, 5 grooves). Sold individually. Disconnect power before installation. Verify compatibility with your washer model.
Replaces Pulley for Motor part numbers: W10677723, 4461547, AP6038394, PS11770267, EAP11770267
Compatibility:
Compatible with models including but not limited to:
Whirlpool: MVWC565FW0, MVW4505MW0, WTW5010LW0, WTW5015LW0, WTW5057LW0, WTW5100HC0, WTW5100HC1, WTW5100HC2, WTW5100HC3, WTW5100HW0, WTW5100HW2, WTW5100HW3, WTW5105HC0, WTW5105HC1, WTW5105HC2, WTW5105HW0, WTW5105HW1, WTW5105HW2, WTW6120HC0, WTW6120HC1, WTW6120HC2, WTW6120HC3, WTW6120HW0, WTW6120HW1, WTW6120HW2, WTW6120HW3, 8TWTW5010PW0, 8TWTW5057PW0
Maytag: MVWC565FW0, 7MMVWC565FW0, MVW4505MW0, MVW4505MW1, MVW4505MW2, MVW5035MW0, MVW5035MW1, MVW5035MW2, MVW5430MW0, MVW5430MW2, MVW5430PBK0, MVW5435PBK0, MVW5435PW0, MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6200KW3, MVW6230HC0, MVW6230HC1, MVW6230HC2, MVW6230HC3, MVW6230HW0, MVW6230HW1, MVW6230HW2, MVW6230RHW0, MVW6230RHW1, MVW6230RHW2, MVW6230RHW3, MVW6500MBK0, MVW6500MW0, MVWC565FW1, MVWX655DW1
Kenmore: 11022352510, 11022352511, 11021112020, 11021112021, 11031312021, 11031312022
Crosley: CAW42114GW0, CAW42114GW1, CAW45125LW0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, and Crosley top-load washers requiring W10677723PL.
🔥 Specifications: Precision-engineered motor pulley, 2-5/16" diameter, 4 ribs, 5 grooves, designed for secure belt engagement and efficient power transfer.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves, optional pry tool; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves issues like excessive noise, belt slippage, or failure to spin.
Product Specification
Part Number: XPW10677723PL
Component Type: Washer motor pulley
Material: Durable plastic with reinforced ribs
Terminal Type: Fits motor shaft with locking tabs
Operating Conditions: Suitable for high-torque washer environments
Compliance: Prop 65 warning for California
Genuine OEM WH49X27322 Washer Transmission Platform Assembly Kit
The Genuine OEM GE WH49X27322 is the transmission platform assembly and nut kit for select GE washer-dryer combo units. The platform supports the transmission and keeps it aligned with the drum. When it wears, cracks or shifts out of alignment, the unit can make clunking or grinding noises during the spin cycle or vibrate heavily.
This is the original GE part, not an aftermarket equivalent. It is sold as a kit. Check your model number before ordering.
Quick Answer
The Genuine OEM WH49X27322 Transmission Platform Assembly Kit replaces the transmission platform and nut on a compatible GE washer-dryer combo when the platform has worn or failed. Classic symptoms: loud clunking or grinding during the spin cycle, or excessive vibration.
Common Problems This Part Fixes
Loud clunking or grinding noise during the spin cycle
Excessive vibration or shaking
Worn, cracked or misaligned transmission platform
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This transmission platform kit is listed under the following part number:
WH49X27322, 4588460, AGE26889, AP6328404, EAP12343556, PD00053354, PS12343556
If your old platform shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for GE washer-dryer combo units, including these examples:
GE GUD24ESSM0WW, GUD24ESSM1WW, GUD24GSSM0WW, GUD24GSSM1WW
GE GUD27ESSM0WW, GUD27ESSM1WW, GUD27GSSM0WW, GUD27GSSM1WW, GUD27ESPM0DG, GUD27GSPM0DG
GE GUV27ESSM0WW, GUV27ESSM1WW, XUD27ESSM0WW, XUD27GSSM0WW
Note: The models above are a sample of 27 that retailers list, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Transmission platform assembly and nut kit
Supports the transmission and keeps it aligned with the drum
Sold as a kit
Product Specifications
Part Number
WH49X27322
OEM Part Number
WH49X27322
Part Type
Washer Transmission Platform Assembly Kit
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Kit
Application
Select GE Washer-Dryer Combos
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the unit and turn off the water supply before you begin. This repair involves the transmission area and is best done with a second person and your model's service guide. Remove the cabinet panels to reach the transmission, remove the screws holding the old platform, install the new platform with the drum and transmission aligned, and secure it with the nut and screws. Reassemble, restore power and water, and run a test cycle.
Frequently Asked Questions
My unit clunks or grinds on spin. Is this the part I need?
It can be. A worn or cracked platform can cause noise and vibration, but worn bearings, drive parts or a loose load can cause similar symptoms. Confirm the platform is the problem before replacing it.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
What is in the kit?
It is sold as the transmission platform assembly and nut kit. Retailers do not list the exact contents, so contact our support team if you need to confirm them before ordering.
Will this fit my washer-dryer?
It is listed for 27 GE washer-dryer combo models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
