XPARTCO DD31-00016A Dishwasher Drain Pump Motor
The XPARTCO DD31-00016A is an aftermarket replacement BLDC (brushless DC) drain pump motor for Samsung dishwashers. This motor removes water from the dishwasher tub during the drain phase of the cycle — an impeller mechanism pumps water out through the drain hose, running during the draining phase to ensure a constant, steady flow and help prevent clogs.
Weighs approximately 0.50 lbs, with package dimensions of 4.02" x 3.50" x 3.54". Compatible with 120V and 230V systems. Common causes of failure include worn motor bearings, electrical failure, or debris obstructing the impeller. Symptoms of a failing drain pump motor include water not draining from the tub, standing water left after a cycle, unusual noise during the drain phase, or intermittent draining problems that don't happen every cycle. It directly replaces AP5917178, 113121, 4000925, EAP9606350, PS9606350, ASM773863, PD00036475, and 045900194701.
Quick Answer
The XPARTCO DD31-00016A Dishwasher Drain Pump Motor fixes Samsung dishwashers that aren't draining, leave standing water after a cycle, make unusual noise during draining, or have intermittent draining problems. BLDC motor, 120V/230V, ~0.50 lbs. Replaces AP5917178, 113121, 4000925, EAP9606350, PS9606350, ASM773863, PD00036475, 045900194701. When removing the old motor, you'll need to hold a release tab open while twisting the motor counterclockwise at the same time — this two-handed step trips up a lot of first-time installers.
Common Problems This Part Fixes
Dishwasher not draining water from the tub
Standing water left in the tub after a completed cycle
Unusual noise during the drain phase
Intermittent draining problems that don't occur every cycle
Reduced water circulation and cleaning performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
DD31-00016A, 113121, 4000925, AP5917178, ASM773863, EAP9606350, PD00036475, PS9606350
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Samsung dishwashers, including model numbers such as DW80R9950QH/AA, DW80B7070UG/AA, DW80R9950MT/AA, DW80B6061UG/AA, DW80R9950QN/AA, DW80B7070US/AA, DW80B6061US/AA, DW80B7071UG/AA, DW80B6060US/AA, DW80B6060UG/AA, DW80BB7070U1/AA, DW80B7070AP/AA, DW80B7071US/AA, DW80R7061UG/AA, DDW24T999BB/DA, DDW24M999UM/DA, DDW24T998US/DA, DDW24M999US/DA, DW60M9990AP, and DW80B6060UG.
Note: This part is not a replacement for any earlier designation — per Samsung's own listing, DD31-00016A is a new part that doesn't supersede another part number. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement BLDC (brushless DC) drain pump motor
Resolves "won't drain," "standing water," "unusual noise," and "intermittent draining" symptoms
Impeller mechanism pumps water out through the drain hose to prevent clogs
Compatible with 120V and 230V systems
Direct drop-in replacement matching the original mounting and connections
Replaces AP5917178, 113121, 4000925, EAP9606350, PS9606350, ASM773863, PD00036475, and 045900194701
Compatible with Samsung dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
Typical repair takes 30 to 60 minutes
Product Specifications
Part Number
XPDD31-00016A
OEM Part Number
DD31-00016A
Part Type
Dishwasher Drain Pump Motor (BLDC)
Condition
Aftermarket Replacement
Brand
Samsung
Motor Type
Brushless DC (BLDC)
Voltage Compatibility
120V / 230V
Weight
Approx. 0.50 lbs
Package Dimensions
4.02" x 3.50" x 3.54"
Repair Difficulty
Moderate — 30 to 60 minutes
Quantity
1 drain pump motor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — This Step Needs Two Hands Turn off and unplug the dishwasher for safety, and shut off the water supply before beginning. Wear work gloves. Remove any panels or components blocking access to the motor pump. Disconnect all wiring from the old motor. Removing the old motor requires holding a release tab open while simultaneously twisting the motor counterclockwise — this two-handed step trips up a lot of first-time installers, so take it slowly and make sure the tab stays held open through the full twist. Once free, remove the old motor. Install the new DD31-00016A securely in the same mounting position. Reconnect all wiring according to the original connections. Reinstall any panels or components removed for access. Restore the water supply and power, then run a test cycle to confirm the dishwasher drains completely with no leaks or unusual noise. Tools needed: screwdriver, work gloves.
Frequently Asked Questions
My dishwasher isn't draining. Is this the part I need?
Yes, this is the most direct symptom of a failed drain pump motor. Since this motor is what removes water from the tub during the drain phase, a worn or failed motor can leave standing water behind or prevent the cycle from completing properly.
My dishwasher's drainage problem only happens sometimes. Could this still be the motor?
Yes, this is possible. One customer replaced this exact motor to address an intermittent draining issue, noting it was somewhat of a guess since the problem didn't occur every cycle. Intermittent symptoms can still point to a motor that's beginning to fail rather than one that's failed completely, though it's worth noting the customer wasn't fully certain the replacement resolved their specific issue.
What's the trickiest part of installing this motor?
Removing the old motor requires holding a release tab open while twisting the motor counterclockwise at the same time — a two-handed maneuver that one customer specifically called out as the biggest challenge of the whole repair. Taking it slowly and keeping steady pressure on the tab through the full twist makes this easier.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the motor design, impeller mechanism, and voltage compatibility of the original DD31-00016A drain pump motor used in compatible Samsung dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
W11612327 Dishwasher Genuine Circulation Pump
Circulation pump and motor assembly
Replaces Part Numbers: W11612327, W11024423, W10805387, W11521436, AP7194668, PS16744935.
Description: This Pump is a Genuine component for specific Whirlpool dishwasher models. It refers to the water pump component that circulates water throughout the dishwasher during cycles. Common cause of a faulty pump can include normal wear over many uses. The continuous motor operation puts strain on internal seals and impellers. Mineral deposits from hard water can also clog pump parts over time.
W10428167 Dishwasher Pump and Motor Assembly
Pump & motor assembly, circulation and drain are handled by this assembly
Replaces Part Numbers: W10428167, 2024551, 3385003, 3385004, 8193511, 8193511A, 8283498, 8283502, AH3500988, EA3500988, AP5306229, PS3500988
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 137292700 Dryer Drum Belt
The XPARTCO 137292700 is an aftermarket replacement multi-rib drum belt for Frigidaire stacked laundry center (combination washer/dryer) units, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and White Westinghouse combo models. This belt attaches to the motor pulley and spins the drum as the motor rotates, keeping clothes tumbling evenly throughout the drying cycle.
Measures approximately 89-1/2" long and 1/4" wide, with multiple ribs. Over time, this belt naturally dries out, cracks, or breaks from regular use. If your dryer is running but the drum won't turn, there's a good chance the belt has broken. Symptoms of a failing belt include the drum not turning, loud banging noises, or the dryer failing to tumble clothes. It directly replaces 137292700, 134163500, 134503900, 5303283287, 4PH 2273, 4PH2273, AFR14366, AH3408299, AP4565702, EA3408299, EAP3408299, PD00000115, PS3408299.
Quick Answer
The XPARTCO 137292700 Dryer Drum Belt fixes Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and White Westinghouse stacked laundry center units where the drum won't turn, you hear loud banging noises, or the dryer won't tumble clothes. Approximately 89-1/2" long, 1/4" wide, multiple ribs. Replaces 137292700, 134163500, 134503900, 5303283287, 4PH 2273, 4PH2273, AFR14366, AH3408299, AP4565702, EA3408299, EAP3408299, PD00000115, PS3408299. This is a laundry center (stacked combo) belt, distinct from standalone dryer belts — verify your full model number before ordering.
Common Problems This Part Fixes
Drum won't turn even though the motor is running
Loud banging noises during operation
Dryer failing to tumble clothes
Belt visibly cracked, dried out, or broken
Drum stopping mid-cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
137292700, 134163500, 134503900, 5303283287, 4PH 2273, 4PH2273, AFR14366, AH3408299, AP4565702, EA3408299, EAP3408299, PD00000115, PS3408299
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select Frigidaire stacked laundry center units, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and White Westinghouse combo units built on the same platform, including model numbers such as WLXG42REW0, FLSE72GCTC, FLSG72GCT1, FLSG72GCT6, LCE852LL1, FLXG52RBS2, FLXG52RBS8, FLXE52RBS9, CLCG900FW0, CLCG900FW1, CLCG900FW2, CLCG900FW3, CLCE900FW0, CLCE900FW1, CLCE900FW2, CLCG500FW0, CLCG500FW1, CLCE600RW0, CLCE500MW1, CLCE500FW2, and CLCE500FW4.
Note: This is a laundry center (stacked washer/dryer combo) belt, distinct from standalone Frigidaire dryer belts. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement multi-rib drum belt — built to OEM-equivalent specifications
Attaches to the motor pulley to spin the drum for laundry center (combo) units
Resolves "drum won't turn," "loud banging noises," and "won't tumble" symptoms
Approximately 89-1/2" long, 1/4" wide, multiple ribs
Direct drop-in replacement matching the original length and profile
Replaces 137292700, 134163500, 134503900, 5303283287, 4PH 2273, 4PH2273, AFR14366, AH3408299, AP4565702, EA3408299, EAP3408299, PD00000115, PS3408299
Compatible with Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and White Westinghouse laundry center units
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP137292700
OEM Part Number
137292700
Part Type
Laundry Center Multi-Rib Drum Belt
Condition
Aftermarket Replacement
Compatible Brand
Frigidaire
Application
Stacked Washer/Dryer Laundry Centers
Length
Approx. 89-1/2"
Width
1/4"
Ribs
Multiple
Function
Transmits motor rotation to spin the drum
Repair Difficulty
Moderate — laundry center disassembly required
Quantity
1 drum belt
Compatible Brands
Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, White Westinghouse
Installation Notes
⚠️ Unplug The Laundry Center Before Starting Disconnect power to the laundry center unit at the outlet before beginning. Wear work gloves. This repair is best approached from the top down: remove the top of the unit first, which gives more room to get the dryer tub out. Remove the two screws from the vented plate on the back of the machine to access and undo the old belt. Since this is a stackable washer/dryer combo, also remove the white plate on the front between the washer and dryer sections for full access. Locate the old belt connecting the motor pulley to the drum and remove it. Fit the new 137292700 belt around the drum and motor pulley in the same path as the old one, making sure it seats correctly and is properly tensioned. Reassemble the front plate, vented back plate, and top of the unit. Restore power and run a test cycle to confirm the drum tumbles smoothly with no banging or unusual noise. Tools needed: putty knife, screwdriver set, work gloves.
Frequently Asked Questions
The motor is running but the drum won't turn. Is this the belt I need?
Yes, this is the classic and most reliable sign of a broken drum belt. If you can hear the motor running normally but the drum itself stays still, the belt has likely dried out and broken, no longer connecting the motor's rotation to the drum.
Is this the same as a standalone Frigidaire dryer belt?
No, this belt is specifically sized and profiled for Frigidaire-style stacked laundry center units, where the washer and dryer are combined into one appliance. It's a different part from standalone Frigidaire dryer belts used on separate dryers. Confirm your unit type and model number before ordering.
Is this a difficult repair?
It's a moderate repair since it involves removing the top of the laundry center unit, the vented back plate, and the front plate between the washer and dryer sections to get full access to the belt. One customer described working from the top down as the easiest approach, since it gives more room to remove the dryer tub.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured to match the length, width, and rib pattern of the original 137292700 multi-rib drum belt used in compatible Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and White Westinghouse laundry center units.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3977394 Dryer Thermal Cut-Off Kit – Compatible with Whirlpool, Kenmore, Maytag, and KitchenAid Dryers
Product Description
Protect your dryer from overheating with the XPARTCO 3977394 Dryer Thermal Cut-Off Kit. This high-quality aftermarket replacement shuts off the heating element if the dryer temperature rises above safe operating limits. A failed cut-off can cause no-heat issues or overheating during drying cycles. Installing this reliable XPARTCO 3977394 kit restores safe temperature control and helps prevent damage to internal components.
Replaces Part Numbers
XPTC352, 3977394, 352F, EXPTC352
Compatibility
This replacement thermal cut-off kit fits select Whirlpool, Kenmore, Maytag, Roper, Estate, Crosley, and KitchenAid dryers.
Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.86573110, and Maytag MEDC215EW1.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM safety and temperature performance
🔥 Overheat Protection – Automatically shuts off power to the heating element if the dryer overheats
💰 Cost-Effective Fix – Affordable alternative to OEM thermal cut-off kits
🛠️ Easy Installation – Direct-fit design with included thermostats and connectors
🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or shutting off prematurely
📐 Product Specification
Part Number: 3977394
Component Type: Dryer Thermal Cut-Off Kit
Includes: Thermal cut-off, high-limit thermostat, mounting hardware, and wire connectors
Temperature Rating: Cut-off opens at ~352°F.
Material: Metal thermostat housing and heat-resistant components
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear dryer panel.
Locate the heating element housing and identify the cut-off and thermostat.
Disconnect wires and remove the old components.
Install the new 3977394 cut-off and thermostat in the same locations.
Reconnect wires, reassemble the back panel, and restore power.
Run a short test cycle to verify proper heating.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your dryer safe and efficient — Add to Cart Now for a reliable, budget-friendly repair!
WP8577891 Genuine OEM Whirlpool Dryer High-Limit Thermostat
The WP8577891 is a genuine Whirlpool OEM high-limit thermostat for Whirlpool, Maytag, Jenn-Air, Kenmore, KitchenAid, Amana, Magic Chef, Admiral, Norge, and Roper dryers. This part combines two functions in a single component: it acts as a safety mechanism that shuts off the heating element when the dryer overheats, and it includes an inlet thermistor that monitors the temperature of the inlet air feeding into the dryer.
Rated L260-68F: the heating element cuts out once internal temperature reaches 260°F, and kicks back in once temperature drops to 192°F, a 68°F differential built into the design. Weighing approximately 0.08 lbs, with package dimensions of 4.33" x 3.43" x 0.79". Because this is a safety-critical component, a malfunctioning thermostat can shut off the dryer even when it isn't actually overheating, in addition to producing the more expected overheating symptom if it fails to trip when it should. Symptoms include the dryer overheating, blown thermal fuses, or the dryer shutting off unexpectedly during a cycle. It directly replaces 8577891, 314654, AP6013527, AWP48573, EAP11746753, OEM18040590, L260-68F, L126.7-37.7C, PD00003286, PS11746753.
Quick Answer
The WP8577891 Genuine OEM Whirlpool Dryer High-Limit Thermostat fixes Whirlpool, Maytag, Jenn-Air, Kenmore, KitchenAid, Amana, Magic Chef, Admiral, Norge, and Roper dryers with overheating, blown thermal fuses, or unexpected shutoffs during a cycle. L260-68F rating. Replaces 8577891, 314654, AP6013527, AWP48573, EAP11746753, OEM18040590, L260-68F, L126.7-37.7C, PD00003286, PS11746753. Test the old thermostat's continuity with a multimeter before ordering — one customer found this quick check would have confirmed the part was actually needed before they bought a replacement.
Common Problems This Part Fixes
Dryer overheating during a cycle
Dryer blowing thermal fuses repeatedly
Dryer shutting off unexpectedly, even when it doesn't seem to be overheating
Dryer not heating properly due to a malfunctioning safety cutoff
Irregular or inconsistent drying cycles
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer high-limit thermostat directly replaces the following OEM and cross-reference part numbers:
WP8577891, 8577891, 314654, AP6013527, AWP48573, EAP11746753, OEM18040590, L260-68F, L126.7-37.7C, PD00003286, PS11746753
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This high-limit thermostat is compatible with select Whirlpool electric dryers, and also fits select Maytag, Jenn-Air, Kenmore, KitchenAid, Amana, Magic Chef, Admiral, Norge, and Roper dryers built on the Whirlpool platform, including model numbers such as MED6600TQ0, WED6200SW0, WED6200SW1, WED6600VU0, WED6600VW0, WED6600WL0, YMED6600TQ0, YWED6200SW1, YWED6600VU0, YWED6600VW0, and YWED6600WL0.
Note: Always verify your full model number before ordering, since Whirlpool uses different high-limit thermostat designs across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified opening and reset temperatures
Combines high-limit thermostat and inlet thermistor functions in one component
Resolves "overheating," "blown thermal fuses," and "unexpected shutoff mid-cycle" symptoms
L260-68F rating — opens at 260°F
Automatically resetting — no replacement needed after each trip
Direct drop-in replacement matching the original mounting and terminal configuration
Replaces 8577891, 314654, AP6013527, AWP48573, EAP11746753, OEM18040590, L260-68F, L126.7-37.7C, PD00003286, PS11746753
Compatible with Whirlpool, Maytag, Jenn-Air, Kenmore, KitchenAid, Amana, Magic Chef, Admiral, Norge, and Roper dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Approximately 30-minute repair
Product Specifications
Part Number
WP8577891
Part Type
Dryer High-Limit Thermostat with Inlet Thermistor
Condition
Genuine OEM
Brand
Whirlpool
Rating
L260-68F
Type
Automatically resetting
Weight
Approx. 0.08 lbs
Package Dimensions
4.33" x 3.43" x 0.79"
Repair Difficulty
Easy — approx. 30 minutes
Quantity
1 high-limit thermostat
Compatible Brands
Whirlpool, Maytag, Jenn-Air, Kenmore, KitchenAid, Amana, Magic Chef, Admiral, Norge, Roper
Installation Notes
⚠️ Unplug Dryer Before Starting — Test With A Multimeter Before Assuming It's This Part Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Unscrew and remove the dryer's exhaust vent hose, then use a nut driver to remove the back panel. Locate the high-limit thermostat, typically mounted near the heating element housing. Before removing the old part, test it with a multimeter set to continuity — a healthy thermostat shows continuity; one that doesn't should be replaced. Photograph the wiring before disconnecting anything. Disconnect the wire terminals from the old thermostat, remove its mounting screw, and pull it free. Install the new WP8577891 in the same position, reconnect the wire terminals, and secure the mounting screw. Reattach the back panel and exhaust vent hose. Restore power and run a full test cycle to confirm normal, consistent heating with no premature shutoffs. Tools needed: nut driver, flat-head screwdriver, multimeter, work gloves.
Frequently Asked Questions
How do I know if this thermostat has actually failed before I order one?
Test the old thermostat with a multimeter set to continuity before ordering — it's a simple, quick check. One customer specifically noted they wished they had tested the part first: they ordered a replacement, then discovered testing the old one with a multimeter was easy to do and would have confirmed whether they actually needed the new part before buying it.
My dryer shuts off even though it doesn't feel like it's overheating. Could this still be the thermostat?
Yes. A malfunctioning high-limit thermostat can shut off the dryer even when actual temperatures are normal, not just when the dryer is genuinely running too hot. If your dryer stops mid-cycle without an obvious overheating cause, this thermostat is worth testing.
Should I replace other parts at the same time as this thermostat?
If your dryer has also blown a thermal fuse, it's worth replacing the fuse and any related thermal cutoff components together with this thermostat, since they often fail from the same underlying overheating cause. Also check your exhaust venting for restrictions while you have the dryer open, since blocked airflow is a common root cause of repeated thermal component failures.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original opening and reset temperatures and mounting configuration of the high-limit thermostat originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket
The WD08X23477 is a genuine GE OEM tub seal gasket designed specifically for GE dishwashers with a stainless steel tub. This gasket runs around the tub opening and creates the seal that keeps wash water contained inside the tub during the cycle rather than leaking out around the edges where the tub meets the door and surrounding cabinet structure.
Over time, this seal can flatten, harden, or develop gaps from years of heat and moisture exposure, which lets water escape past the seal instead of staying inside the tub. A worn or damaged gasket typically shows up as water leaking from underneath or around the front of the dishwasher during a cycle, dampness or pooling near the base of the unit, or visible flattening, cracking, or separation in the seal material itself. It directly replaces AP6041570 and PS11774413.
Quick Answer
The WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket fixes GE dishwashers with a stainless steel tub that are leaking water from around the tub opening during a cycle. Replaces AP6041570, PS11774413. This gasket is specific to stainless steel tub models — it is not the plastic tub/door gasket used on other GE dishwasher designs, such as WD08X21894 or WD08X23476.
Common Problems This Part Fixes
Water leaking from underneath or around the front of the dishwasher during a cycle
Dampness or pooling near the base of the dishwasher after running
Visible flattening, hardening, or cracking of the seal around the tub opening
Gaps or separation in the gasket where it meets the tub frame
Leak that appears intermittently, worse on longer or hotter cycles
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher tub seal gasket directly replaces the following OEM and cross-reference part numbers:
WD08X23477, WD08X22095, WD08X20675, 4466531, WD08X20591, AGE24098, AP6041570, EAP11774413, PD00052582, PS11774413
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This tub seal gasket is compatible with select GE dishwashers equipped with a stainless steel tub, and also fits select Hotpoint, Haier, Monogram, and Café dishwashers built on the same GE platform.
Note — stainless steel tub only, and verify fit carefully: This gasket is designed specifically for GE's stainless steel tub design and is a different part from the gaskets used on plastic tub GE dishwashers (such as WD08X21894 or WD08X23476). Additionally, this seal has a documented fitment sensitivity — at least one customer has reported that on their unit, the older original seal had roughly 2 extra inches of material at the bottom that this replacement did not match, resulting in a persistent minor leak even after installation. Confirm your dishwasher has a stainless steel tub and verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified for stainless steel tub dishwashers
Seals the tub opening to keep wash water contained during the cycle
Resolves "water leaking from the front or underneath," "dampness near the base," and "flattened or cracked seal" symptoms
Durable material designed to withstand repeated high-humidity, high-temperature cycles
Direct drop-in replacement — fits the original tub opening groove
Replaces AP6041570 and PS11774413
Compatible with GE, Hotpoint, Haier, Monogram, and Café stainless steel tub dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WD08X23477
Part Type
Dishwasher Tub Seal Gasket
Condition
Genuine OEM
Brand
GE
Application
Stainless Steel Tub Dishwashers
Function
Seals the tub opening to prevent water leaks during wash cycles
Quantity
1 tub seal gasket
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Before Starting — Verify Seal Length Against Your Original Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access to the tub opening seal is typically from the front of the unit with the door open, though some models may require removing the door or surrounding trim to fully access the gasket channel. Before removing the old seal, take note of its full length and how it seats into the groove around the tub opening — some customers have found the replacement seal shorter than the original at one section, so compare the two side by side before discarding the old one. Carefully pull the old gasket free from its retaining groove, working around the full perimeter. Press the new WD08X23477 gasket into the same groove, working around the full perimeter and ensuring it seats evenly with no twists, gaps, or areas where it's pulled too tight. Run your fingers along the full seal after installation to confirm even, consistent contact with no visible gaps. Restore water and power, then run a test cycle and check underneath and around the front of the unit for any signs of leaking. Tools needed: flat-blade screwdriver (model-dependent access), work gloves.
Frequently Asked Questions
How do I know if my dishwasher has a stainless steel tub or a plastic tub?
Open the dishwasher door and look at the interior tub walls — a stainless steel tub has a visible metallic finish, while a plastic tub is typically a solid plastic color (often white, gray, or black) with no metallic sheen. This gasket is designed specifically for the stainless steel tub design; plastic tub models use a different gasket. If you're not sure, check your model number against your appliance's documentation or contact our support team.
I installed the new seal but I'm still seeing a small leak. What should I check?
This has been reported by at least one customer, who found their original seal had extra material at the bottom that this replacement didn't fully match, resulting in a persistent minor leak. Before assuming the gasket itself is faulty, run your fingers around the entire seal after installation to check for any spot where it isn't making even, firm contact — pay particular attention to the bottom section. If a specific area isn't sealing, it may need to be pressed more firmly into its groove, or in rare cases, your particular tub design may require a different seal than expected. Contact our support team with your model number if the leak persists after a careful reinstall.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original material, profile, and groove fit of the tub seal gasket originally installed in your stainless steel tub dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4581DD3002ACM Dishwasher Upper Dishrack Roller
Upper rack roller for LG & Kenmore Elite Dishwashers. Sold individually, but recommend replacing in sets. Includes roller and clip on axel.
Replaces Part Numbers: 4581DD3002A, 4581DD9001B, 1266813, AH3523050, EA3523050, AP4437685, PS3523050.
This is an aftermarket part that can be used as a replacement for the OEM part.
WARNING: California’s Proposition 65 (California Residents Only)
XPARTCO 8580309 Dishwasher Door Latch Strike Replaces WP8580309
The XPARTCO 8580309 is an aftermarket replacement door latch strike for Whirlpool-built dishwashers. This small metal component attaches at the top of the dishwasher tub and locks the door latch securely in place whenever the door is closed. It does double duty: mechanically, it's what keeps the door held shut and properly tensioned against the tub opening to maintain a watertight seal during the wash cycle, and it also acts as the actuator that trips the door switch, telling the control that the door is closed and it's safe to run.
Made from durable metal, measuring approximately 2" in length. Over years of opening and closing the door, the strike can wear down, bend from an accidental impact, or simply weaken to the point where it no longer holds the latch with enough tension. Debris buildup around the strike can also interfere with proper latching. A failing strike produces a clear set of symptoms: the dishwasher won't start because the door switch never registers as closed, the door feels loose or doesn't seal tightly when shut, or water leaks out around the door during a cycle. It directly replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800.
Quick Answer
The XPARTCO 8580309 Dishwasher Door Latch Strike fixes Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers that won't start because the door won't latch, feel loose when closed, or leak water around the door during a cycle. Metal construction, approximately 2" long. Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, PS11746800. Package includes small parts — keep away from young children during installation.
Common Problems This Part Fixes
Dishwasher won't start because the door won't latch or the door switch never registers as closed
Door feels loose, doesn't seal tightly, or doesn't hold shut properly
Water leaking out around the door during a wash cycle
Door latch failing to catch even though the door appears closed
Visible wear, bending, or damage on the strike itself
Increased door-closing noise since the strike no longer cushions the latch properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher door latch strike directly replaces the following OEM and cross-reference part numbers:
8580309, WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, EAP1156352 PS1156352, AWP48708, PD00004771.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door latch strike is compatible with select Whirlpool-built dishwashers across the Whirlpool family of brands, including:
Whirlpool dishwashers — DP1040X, DU1055XTSS2, DU1145XTPBA
Whirlpool GU series — GU1500XTKB0, GU1200XTKS0, GU1200XTLB3, GU2400XTPS3, GU1200XTKB0, GU1100XTLB1, GU1500XTLQ1
KitchenAid — KUDC02IRBL1, KUDI01DLBL2, KUDI01DLWH2, KUDL02IRBS3, KUDK01ILBS0, KUDK01ILBS1, KUDK01ILBS5, KUDK03ITBS1
Kenmore / Sears — 665.16512201, 665.16532200, 665.17533202, 665.17512200
Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers (select models)
Note: Always verify your full model number before ordering, since Whirlpool uses several different door latch strikes across its dishwasher lineup, including the separate W10544004 / WPW10544004 strike used on other models. Contact our support team with your model number if you're unsure which strike fits your dishwasher.
Key Features
Aftermarket replacement door latch strike — attaches to the top of the tub and locks the door latch in place when closed
Works as a mechanical actuator for the door switch, confirming to the control that the door is closed
Provides the door tension needed for a proper watertight seal
Resolves "won't start," "door won't latch," "loose door," and "leaking around the door" symptoms caused by strike wear or damage
Durable metal construction, approximately 2" in length
Direct drop-in replacement — mounts to the original tub location
Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, and related dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
8580309
OEM Part Number
WP8580309
Part Type
Dishwasher Door Latch Strike
Condition
Aftermarket Replacement
Material
Metal
Length
Approx. 2 in.
Weight
Approx. 0.03 lbs.
Location
Top of the dishwasher tub
Function
Locks the door latch and actuates the door switch
Repair Difficulty
Easy — basic hand tools, minor disassembly
Quantity
1 door latch strike
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, Crosley
Installation Notes
⚠️ Unplug Dishwasher Or Shut Off Breaker Before Starting Unplug the dishwasher or shut off the house circuit breaker before beginning. Wear work gloves. Open the dishwasher door and locate the door latch strike mounted at the top of the tub opening, above where the door latch engages when closed. Using a flat-blade screwdriver, remove the screws securing the old strike in place, then lift it free. Position the new 8580309 strike in the same location, aligning it so the door latch will catch and engage correctly when the door is closed, and secure it with the mounting screws. Close the door and confirm the latch catches firmly and holds the door snugly against the tub with no give. Restore power and run a test cycle, checking around the door for any signs of leaking. Tools needed: flat-blade screwdriver, work gloves.
Frequently Asked Questions
My dishwasher won't start even though I closed the door. Is this the strike?
It's a strong possibility. This strike acts as the mechanical actuator for the door switch — when the door closes, the strike is what physically trips the switch to signal the control that it's safe to run. If the strike has worn down, bent, or weakened, the door may appear closed without properly triggering that switch, leaving the dishwasher unable to start even though nothing looks obviously wrong.
Water is leaking around my door during the cycle. Could that be this part?
Yes, this is a common cause. The strike provides the tension that pulls the door snugly against the tub opening to maintain a watertight seal. If it's worn or damaged, the door may close but without enough holding tension to keep the seal tight, letting water seep out around the edges during the wash.
Is this the same strike used on all Whirlpool dishwashers?
No. Whirlpool uses more than one door latch strike design across its dishwasher lineup — for example, the W10544004 / WPW10544004 strike is a separate part used on other models such as the WDF520PADM, WDT730PAHZ, and WDT720PADM. Always check your full model number before ordering to make sure you're getting the correct strike for your specific dishwasher.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, mounting configuration, and door-tensioning function of the original WP8580309 latch strike used in compatible Whirlpool, Kenmore, KitchenAid, and related dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WE03X10016 Dryer Genuine OEM Drum Roller Assembly – Compatible with GE & Hotpoint Dryers
Product Description
Restore smooth, quiet dryer operation with the WE03X10016 Dryer Genuine OEM Drum Roller Assembly. This factory-approved roller supports the dryer drum as it rotates, reducing friction and vibration during operation. A worn or damaged drum roller can cause squealing, thumping, grinding noises, or uneven tumbling. Replacing it with this Genuine OEM assembly ensures proper drum alignment, quiet performance, and long-lasting reliability.
Replaces Part Numbers
WE03X10016, WE01X10384, WE12M39, WE01X10385, WE01X10386, 3029206, PD00042055, EAP8756654, AP5793315, PS8756654.
Compatibility
This Genuine OEM drum roller assembly fits select GE and Hotpoint dryers.
Example compatible models include (but are not limited to):GE GTD33EASK0WW, GTD42EASJ2WW, GTD45EASJ2WSHotpoint HTDX100EM8WW, HTDX100ED6WW
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for exact fit and smooth rotation
🔇 Noise Reduction – Helps eliminate squealing, thumping, and grinding sounds
⚙️ Stable Drum Support – Maintains proper drum alignment during all cycles
💪 Durable Construction – OEM-grade materials designed for long service life
🛡️ Fixes Common Issues – Resolves noisy operation, drum drag, or uneven tumbling
📐 Product Specification
Part Number: WE03X10016
Component Type: Dryer Drum Roller Assembly
Material: OEM-grade polymer roller with metal shaft insert
Mounting: Slides onto support shaft and secures with retaining clip
Location: Rear drum support (varies by model)
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect power and remove the dryer front panel and drum as required.
Locate the worn drum roller on the rear support shaft.
Remove the retaining clip and slide off the old roller assembly.
Install the new WE03X10016 roller assembly and secure it with the clip.
Reinstall the drum and panels, then restore power.
Run a test cycle to confirm quiet, smooth operation.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore quiet, smooth dryer performance — Add to Cart Now for a factory-quality repair!
Genuine Whirlpool OEM
Whirlpool WP8577376 Washer Genuine OEM Transmission Shaft Seal
Factory replacement transmission stem / agitator shaft seal for select Whirlpool-built top-load washers.
Product Overview
WP8577376 is a Genuine Whirlpool OEM washer shaft seal. Whirlpool describes it as a washing machine transmission stem seal, while Sears identifies it as an agitator shaft seal.
The seal helps prevent wash water from leaking between the tub mounting stem and the agitator drive shaft, protecting the transmission/drive area from moisture.
Quick Answer
WP8577376 is the current Genuine Whirlpool OEM replacement for several older washer shaft and center-post seals. It is commonly used on older Whirlpool-built direct-drive top-load washers.
Common Problems This Part May Fix
Water leaking around the agitator or center-post area
Moisture reaching the transmission or drive system
Worn, cracked, hardened, or missing shaft seal
Leak discovered during tub or transmission service
Replaces and Cross-References
WP8577376, WP91938, 8577376, 91938, 1181094, 356934, 356934BULK, 356934D, 99404, J27-500, J27-661, LP630, LP631, AP6013521, AWP49388, PD00005095, PS11746747
Cross-reference numbers are provided for identification. Always verify the complete appliance model number before ordering.
Compatibility
Fits select Whirlpool-built washers sold under Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Admiral, Amana, Magic Chef, Maytag and related brands. Compatible model examples include:
LSR7233DZ1
LSQ8243HQ0
LSQ8512KQ0
LSQ8543JQ0
LSQ9110PW3
LSQ9544KQ0
LSQ9549LG1
110.10502990
110.16602690
110.73875800
110.71770610
110.73775200
Important: This is only a partial compatibility list. Verify the full washer model number and original seal number before purchase.
Key Features
Genuine Whirlpool OEM replacement part
Transmission stem / agitator drive shaft sealing function
Helps prevent water intrusion into the drive area
Updated replacement for multiple older shaft-seal numbers
Designed for select Whirlpool-built top-load washers
Product Specifications
Manufacturer Part Number
WP8577376
Brand
Whirlpool
Part Type
Transmission Stem / Agitator Shaft Seal
Condition
New
Part Quality
Genuine OEM
Application
Washer Tub / Transmission Shaft Sealing
Package Quantity
1 Shaft Seal
Installation Notes
Unplug the washer and shut off both water-supply valves before service.
Drain any remaining water and follow the appliance service procedure for tub/drive-system access.
Remove the old shaft seal without damaging the mounting surface or drive shaft.
Clean the sealing surface before installing the replacement.
Install the new seal in the correct orientation and reassemble the washer.
Run a test cycle and inspect carefully for leaks.
Service note: A leak in this area can also involve worn tub seals, a damaged mounting stem, corrosion, or transmission/shaft wear. Inspect related components while the washer is disassembled.
Frequently Asked Questions
Is WP8577376 a Genuine Whirlpool OEM part?
Yes. WP8577376 is a Genuine Whirlpool OEM replacement shaft seal.
What does this seal do?
It helps prevent water from leaking between the tub mounting stem and agitator drive shaft.
Does WP8577376 replace 8577376 and 91938?
Yes. Those are among the earlier part numbers superseded by WP8577376.
Is this the complete transmission?
No. This listing is for the shaft seal only. The transmission/gearcase and other seals are not included.
Shop With Confidence
Use your washer's complete model number to confirm fitment before ordering.
Genuine Whirlpool OEM Factory Replacement Compatibility Support Fast U.S. Shipping
