XPARTCO W10900067 Dryer Thermal Cut-Off Fuse & Thermostat Kit – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore safe and reliable dryer heating with the XPARTCO W10900067 Dryer Thermal Cut-Off Fuse & Thermostat Kit. This cut-off terminal is a replacement Part for specific Kenmore, Maytag, Roper, Whirlpool dryer models. The kit contains a 309°F Thermal Cut-Off Fuse and a high limit thermostat. In electric dryers, it shuts off the heat if overheating occurs to prevent fire risk. The thermal fuse cuts power while the thermostat regulates the operating temperature. To install, first, unplug the dryer. Use a multimeter to test the old fuse for continuity at room temperature; it should read zero ohms.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
W10900067, 4460718, N197, 197CM, 197, PD00046493, EAP11769432, AP6036100, PS11769432.
Compatibility
This replacement dryer thermal cut-off fuse and thermostat kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.
Example compatible models include (but are not limited to):
Whirlpool WED4800XQ, WED4815EW1
Maytag MEDC215EW1
Kenmore 110.6012010
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Matches OEM temperature and safety specifications
🌡️ Accurate Heat Protection – Helps regulate dryer temperature safely
🔥 Overheat Safety Cut-Off – Prevents damage caused by excessive heat
💰 Cost-Effective Repair – Reliable alternative to higher-priced OEM kits
🛡️ Fixes Common Issues – Resolves no heat, overheating, and thermal shutdowns
📐 Product Specification
Part Number: W10900067
Component Type: Dryer Thermal Cut-Off Fuse & Thermostat Kit
Includes: Thermal cut-off fuse and high-limit thermostat
Application: Heater housing / exhaust temperature control
Material: Heat-resistant metal housings
Mounting: Screw-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove the rear access panel.
Locate the thermal cut-off and thermostat on the heater housing.
Disconnect wiring and remove old components.
Install the new XPARTCO W10900067 components in the same positions.
Reconnect wiring, reinstall panel, and restore power.
Run a test cycle to confirm proper heating.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore safe dryer heating and protection — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO 00619985 Dishwasher Mounting Bracket Kit - Compatible with Bosch, Thermador, Gaggenau, Kenmore Dishwashers
Product Description
Secure your dishwasher with the replacement XPARTCO 00619985 Mounting Bracket Kit. This kit provides sturdy brackets to fasten select Bosch, Thermador, Gaggenau, and Kenmore dishwashers to kitchen cabinets or countertops, ensuring stability and preventing tipping. It addresses issues like loose mounting, excessive vibration, or noise during operation, offering a cost-effective alternative to OEM parts.
Note: Includes two mounting brackets and mounting screws (for top or side installation). Disconnect power before installation. Verify countertop or cabinet suitability for mounting.
Replaces part numbers: 00619985, 00628371, 00605007, 1567804, 605007, 619985, 628371, AH3478789, EA3478789, PS3478789, PD00000071, AP4538351, PS8728568.
Compatibility:
Compatible with models including but not limited to:
Bosch: SHX88PW55N/01, SHX89PW55N/01, SHX33M06UC/46, SHX33M05UC/46, SHX33M02UC/53, SHX33M02UC/52, SHX33M02UC/50, SHX33M02UC/46, SHEM3AY55N
Thermador: DWHD94EP/50
Gaggenau: Select models requiring 00619985
Kenmore: Select models requiring 00619985
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Bosch, Thermador, Gaggenau, and Kenmore dishwashers.
🔥 Specifications: replacement mounting bracket kit, includes two stainless steel brackets and two 1.5" hex-head screws for top or side mounting.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, wrench, work gloves; typically installed in 10–15 minutes.
🛡️ Effective Fixes: Resolves loose or unstable mounting, excessive vibration, or noise during operation.
Product Specification
Part Number: XP619985
Component Type: Mounting bracket kit
Material: Stainless steel
Weight: 3.0 oz (kit)
Mounting Hardware: Includes two 1.5" hex-head screws
Operating Conditions: Suitable for high-humidity kitchen environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher stable and secure today!
Add to cart now for a budget-friendly fix!
XPARTCO LA1053 Dryer Thermostat Kit – Replaces LA-1053 – Compatible with Whirlpool, Maytag, Admiral, and Amana Dryers
Product Description
Restore proper dryer temperature control with the XPARTCO LA1053 Dryer Thermostat Kit. This Dryer Thermostat Kit is a replacement part for specific Maytag, Whirlpool dryer models. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (53-0771) and two thermal fuses.
53-1096 (blue dot for Gas)
53-1182 (Red dot for Electric)
Replaces Part Numbers
LA-1053, 3344, 53-0143, 53-0170, 53-0261, 53-1133, 53-1526, AH2162282, EA2162282, ERLA1053, ET403, ET405, K35-601, LA-1053VP, LA1053, SET405, TJ90SET405, 531526, 531182, 531133, 530261, LA1053, 530143, WP53-1182, 53-1182, 53-0143, 53-1096 , L248-80F, PD00002446, EAP2162282, AP4242472, PS2162282, WP53-0771, 53-0771, 1422, 53-0306, 53-1037, 53-1459, ER53-0771, SET176, TJSET176, AP6009638, PS11742806, WP53-1096, 53-1096, 4434853, AP6009640, PS11742808.
Compatibility
This replacement thermostat kit fits select Whirlpool, Maytag, Admiral, and Amana dryers.
Example compatible models include (but are not limited to): Maytag DE303, Whirlpool LDE8824ACE, and Amana LEA30AW.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Compatibility – Compatible with Whirlpool, Maytag, Admiral, and Amana dryers
🔥 Complete Kit – Includes cycling thermostat, high-limit thermostat, and thermal fuse. Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.
💰 Cost-Effective Repair – Replaces multiple components in one package
🛠️ Easy to Install – Direct-fit parts require only basic tools
🛡️ Fixes Common Issues – Resolves dryers not heating, overheating, or shutting off early
📐 Product Specification
Part Number: LA1053
Component Type: Dryer Thermostat and Thermal Fuse Kit
Material: Heat-resistant metal with high-quality electrical connectors
Mounting: Direct-fit replacement on heater housing and blower housing
Operating Conditions: Designed for residential electric dryers
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Unplug the dryer and remove the rear access panel.
Locate the thermostat and thermal fuse on the heater housing.
Remove screws securing the old components and disconnect wires.
Install the new thermostats and fuse from the XPARTCO LA1053 kit.
Reconnect wiring, reinstall the back panel, and restore power.
Run a test cycle to confirm proper heating and temperature control.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dryer running safely and efficiently again — Add to Cart Now for a reliable, budget-friendly repair kit!
197XP Dryer Thermostat Kit – Replaces 279816, WP3977767, W10900067 – Compatible with Whirlpool, Kenmore, Maytag, and Amana Dryers
Product Description
Restore safe and efficient drying performance with the 197XP Dryer Thermostat Kit. This high-quality aftermarket replacement includes both a high-limit thermostat and a thermal cut-off fuse to regulate dryer temperature and prevent overheating. A failed thermostat or cut-off can cause long dry times, no-heat conditions, or overheating. Installing this complete kit ensures dependable temperature control and long-lasting dryer operation.
Replaces Part Numbers
279816, 2651, 279816VP, 3399848, 3977393, AH334299, AP3094244, EA334299, PS334299, WP3977767, 3977767, 3399693, 898078, AP6009043, ER3977767, PS11742185, SET185, TJ90SET185, WP3977767VP, W10900067, PD00046493, EAP11769432, AP6036100, PS11769432.
Compatibility
This replacement thermostat kit fits select Whirlpool, Kenmore, Maytag, Amana, Roper, Crosley, and Estate dryers.
Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.87562602, and Amana NED4655EW1.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM temperature ratings and safety standards
🔥 Dual-Protection Design – Includes thermal cut-off fuse and high-limit thermostat for overheat prevention
💰 Affordable Alternative – Provides OEM-level performance at a lower cost
🛠️ Easy DIY Installation – Pre-terminated connectors and hardware for quick repair
🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or short-cycling problems
📐 Product Specification
Part Number: 197XP
Temperature Ratings: 309* degree F Thermal Fuse with L250-80* degree F Limit Thermostat.
High Limit Thermostat and Thermal Fuse for the Heater.
No need to splice any wires, no re wiring needed.
Component Type: Dryer Thermal Cut-Off & High-Limit Thermostat Kit
Includes: Thermal cut-off fuse, high-limit thermostat, mounting hardware, and wire connectors
Material: Metal thermostat housing with heat-resistant wiring
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and remove the back panel of the dryer.
Locate the heater housing and identify the existing thermostat and cut-off fuse.
Remove wires and mounting screws from old components.
Install the new 197XP thermostat kit in the same positions.
Reconnect wires, reassemble the panel, and restore power.
Run a drying cycle to confirm proper operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your dryer and restore heat safely — Add to Cart Now for a reliable, budget-friendly repair!
XPARTCO WB02X35488 (2 Pack) Microwave Halogen Light Bulb
Product Overview
The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation.
Quick Answer
If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking.
Replaces Part Numbers
Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934.
Compatibility
This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves.
GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS
Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs
Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Microwave interior light not working
Dim or flickering light
Reduced visibility while cooking
Key Features
Bright halogen illumination
Restores clear interior visibility
High-quality aftermarket replacement
Easy bulb replacement design
Product Specifications
Part Number: WB02X35488
Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts.
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Microwave Interior Lighting
Troubleshooting Guide
No interior light → Burned out bulb
Flickering light → Failing bulb
Dim light → Aging or damaged bulb
When Should You Replace This Bulb?
Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent.
Installation Notes
⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model.
Related Parts
Microwave Door Switch
Control Panel
Turntable Motor
Frequently Asked Questions
Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number.
Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use.
What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed.
Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
ERP W10869845 Front Load Washer & Dry Stacking Kit
Replaces Part Numbers:W10869845, W10298318RP, W10761316, W10298318, 12774, 52774, AP6047938, PS12069913.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
383EEL3002R LG Genuine OEM Dryer Gas to LP Conversion Kit
Replaces Part Numbers: 383EEL3002R, 383EEL3002D, AP7177100, PS16661200.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
8194001CM Dishwasher Hinge Link Kit
Kit includes a complete set of (2) wheel and mount assembly and (2) link cables.
Replaces Part Numbers: 8194001, 1059756, 8194001VP, 8270018, 8270022, 8535568, W10158291, AH972325, EA972325, ERW10158291, OEM11326241, AP3775412,, PS972325.
Description: This Door Balance Link Kit is a replacement part for specific Kenmore, KitchenAid, Whirlpool dishwasher models. This kit includes the necessary components to ensure proper balancing and operation of the dishwasher door. Causes of needing to replace the door balance link kit include wear and tear over time, damage due to mishandling or impact, or issues with the door hinges or springs.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
383EEL3002A LG Genuine OEM Dryer Gas to LP Conversion Kit
Replaces Part Numbers: 383EEL3002A, 383EEL3002B, AH3522299, EA3522299, AP4437656, PS3522299.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
285809 Washer Genuine Short Cam Agitator Repair Kit
Replaces Part Numbers: 285809, 3951650, 3951682, 470910, AH334648, EA334648, OEM9283634, AP3094543, PS334648.
Description: This Short Cam Agitator Repair Kit is an OEM part for specific Kenmore, Maytag, Whirlpool washing machine models. It's specifically designed to fix issues related to the washer's agitator, which is responsible for moving the clothes during the wash cycle to ensure they are thoroughly cleaned. This kit typically includes the cam, agitator dogs, and possibly other components needed to restore the agitator's functionality.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
