XPARTCO 2315549 Refrigerator Evaporator Fan Motor Replaces WP2315549
The XPARTCO 2315549 is an aftermarket replacement evaporator fan motor for Whirlpool-built side-by-side refrigerators, located in the freezer section. This small motor pulls cold air off the evaporator coil and pushes it through the duct system to both the freezer and fresh food compartments. Without it circulating air, the coil itself keeps getting cold, but that cold air never reaches your food — the freezer, being closest to the coil, may hold up reasonably well for a while, but the fresh food compartment depends entirely on ducted airflow and drifts warmer and warmer as circulation weakens or stops.
This motor ships complete with its wiring harness, so nothing needs to be spliced or transferred from the old unit. Common failure modes include worn motor bearings that let the blade wobble or bind, ice buildup on the coil that jams the blade, and electrical failure of the motor windings. A simple way to check before ordering: with the refrigerator unplugged, try turning the fan blade by hand — it should spin freely with no grinding or resistance. It directly replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, and EAP11740362.
Quick Answer
The XPARTCO 2315549 Refrigerator Evaporator Fan Motor fixes Whirlpool-built side-by-side refrigerators with uneven cooling between compartments, frost buildup on the evaporator coil, unusual humming or buzzing noise, or a fresh food section that runs warmer than the freezer. Includes wiring harness. Replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, EAP11740362. Double-check the part number carefully — this is a different motor from our similarly numbered 2315539 listing, and the two are easy to mix up.
Common Problems This Part Fixes
Fresh food compartment running warmer than the freezer, or warmer than it used to
Uneven temperatures between shelves or between the fresh food and freezer sides
Frost or ice buildup accumulating on or around the evaporator coil
Unusual humming, buzzing, or grinding noise coming from inside the freezer
Noise that stops when the freezer door is opened and starts again once it's closed
Refrigerator running constantly as the compressor tries to compensate for poor circulation
Fan blade that doesn't spin freely, or spins with noticeable resistance, when checked by hand
Fridge section too warm or too cold, freezer section too warm or too cold
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
2315549, WP2315549, 2220569, 1193008, AP6007250, AWP47338, PD00002704, PS11740362, EAP11740362, ESF-U2A
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Whirlpool-built side-by-side refrigerators across the Whirlpool family of brands, including:
Whirlpool side-by-side refrigerators
Maytag, Amana, and KitchenAid refrigerators (select Whirlpool-built models)
Jenn-Air, Admiral, Norge, and Roper refrigerators (select models)
Inglis refrigerators (select models)
Select Kenmore and Ikea refrigerators built on the Whirlpool platform
Verified model numbers include: 7GS2FHAXTA02, 7GS5FHAXTA00, ED2DHEXWB00, and ED2DHEXWL00.
Note — easy to confuse with 2315539: This part is 2315549, production number ESF-U2A. It is a separate, distinct motor from our 2315539 listing (production number ESF-U2B, replacing 2219689, 2225625, and W10438708), which serves a different set of models. The two part numbers differ by only a single transposed digit and are frequently mistyped or mixed up when ordering — double-check your old motor's part number or your appliance's full model number carefully before ordering. Contact our support team with your model number if you're unsure which motor you need.
Key Features
Aftermarket replacement evaporator fan motor with wiring harness included — nothing to splice or transfer
Circulates cold air from the evaporator coil throughout the freezer and fresh food compartments
Resolves "fresh food too warm," "uneven cooling," "frost buildup," and "humming or buzzing noise" symptoms caused by fan motor failure
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, and EAP11740362
Compatible with Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Norge, Roper, Inglis, and select Kenmore refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair — typically 15 to 30 minutes
Product Specifications
Part Number
2315549
OEM Part Number
WP2315549
Production Number
ESF-U2A
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
Whirlpool
Location
Freezer section, behind the rear panel near the evaporator coil
Kit Contents
Fan motor with wiring harness
Application
Side-by-Side Refrigerators
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Norge, Roper, Inglis, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Let The Freezer Thaw If Iced Over Disconnect power at the outlet before beginning, and move all food from the freezer to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove the shelving and bins as needed, then remove the screws securing the back panel and set it aside to expose the evaporator coil and fan assembly. If you see significant frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing — ice can be masking the actual failure and can make the old motor difficult to remove cleanly. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free — on many models the blade is a separate piece that pulls off the motor shaft. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new 2315549 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How is this different from your 2315539 listing? The numbers look almost identical.
They are genuinely different motors that happen to have nearly identical part numbers — 2315549 versus 2315539, just one transposed digit. This 2315549 motor carries production number ESF-U2A and replaces WP2315549, 2220569, and 1193008. Our separate 2315539 listing carries production number ESF-U2B and replaces a different set of numbers (2219689, 2225625, W10438708) for a different group of models. Because the numbers are so easy to mix up, we'd strongly recommend double-checking the exact number on your old motor, or your full refrigerator model number, before ordering either one.
My freezer seems fine but the fresh food section is warm. Is this the fan motor?
Yes, this is a very common and telling symptom pattern. The freezer compartment sits right next to the evaporator coil and can stay reasonably cold through simple proximity even with poor air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area.
How can I test the motor before ordering a replacement?
With the refrigerator unplugged and the rear freezer panel removed, try turning the fan blade by hand. It should spin freely and smoothly with no grinding, binding, or resistance. If it doesn't turn freely, or doesn't turn at all, the motor has very likely failed. Also listen for humming or buzzing while the refrigerator is running — a motor trying and failing to turn often makes noise without actually moving air.
There's a lot of frost around the fan and coil. Should I address that first?
It's worth understanding which came first. Excess frost can be a cause of fan failure — a jammed, ice-bound blade can burn out the motor over time — or a result of it, since poor air circulation lets moisture condense and freeze unevenly around the coil area. Either way, thawing the ice out fully before installing the new motor makes the repair easier and lets you confirm the blade spins freely once everything is defrosted.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the mounting, wiring harness configuration, and airflow performance of the original WP2315549 evaporator fan motor used in compatible Whirlpool-built side-by-side refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4681JB1027C Refrigerator Evaporator Fan Motor
Replaces Part Numbers: 4681JB1027C, EAU60694512, 4681JB1027V, 4681JK1004E, AH3523323, EA3523323, EAU52096201, EAU60694529, SM1027C, AP4507961, PS3523323.
Replaces LG #4681JB1027C.
13VDC, 3.1 W, .24A.
Has quick disconnect.
Description: This Fan Motor is a replacement part for specific LG refrigerator models. It is essential for circulating air throughout the refrigerator and freezer compartments, ensuring that the temperature is evenly distributed and maintained at the set levels. This motor powers the fan that helps to cool the evaporator coils and dissipate heat, which is vital for the appliance's cooling efficiency.
This is an aftermarket part that can be used as a replacement for the OEM part.
WR60X25858 Freezer Genuine OEM Evaporator Fan Motor
The WR60X25858 is a genuine GE OEM freezer evaporator fan motor for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore models. Located in the freezer compartment, this motor circulates air across the evaporator coil and out into the freezer and, on many models, the fresh food compartment, drawing heat out of the air to maintain consistent, efficient cooling throughout the appliance.
Rated 13.6V DC, 0.23 amps, with fan dimensions of approximately 4.5" x 4.5" and a wiring harness and plug extending about 8.25" from the frame. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the freezer failing to cool properly and warming up, insufficient airflow, excessive frost buildup, higher-than-normal freezer temperatures, or unusual noise — often caused by frost or ice rubbing against the fan blade as it turns. It directly replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431.
Quick Answer
The WR60X25858 Freezer Genuine OEM Evaporator Fan Motor fixes GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators with a freezer that's warming up, insufficient airflow, excessive frost, or unusual noise from the fan area. 13.6V DC, 0.23A, ~4.5" x 4.5", 8.25" harness. Replaces 239D1371P002, 3033253, 4931166, AP5669723, AP6891698, EAP12727431, EAP7320382, PS12727431, PS7320382, U11P14MS7AA3-57A61, WR60X10340, AGE29632. If your freezer isn't cold, check the evaporator fan first — but while you're in there, cleaning frost or ice off the fan blade and vacuuming the condenser coils are worthwhile companion steps.
Common Problems This Part Fixes
Freezer not cooling properly, warming up
Insufficient airflow through the freezer compartment
Excessive frost buildup
Higher-than-normal freezer temperatures
Unusual noise from the fan area, including frost or ice rubbing on the blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This freezer evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators built on the GE platform, including model numbers such as DFE29JSDFSS and DFE29JGDAWW.
Note: GE uses several different evaporator fan motors across its refrigerator lineup, including WR60X26866 and WR60X26033 for other models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine GE OEM part — factory-specified motor design and airflow rating
Circulates air across the evaporator coil to draw heat out and cool the freezer
Resolves "freezer warming up," "insufficient airflow," "excessive frost," and "unusual noise" symptoms
Rated 13.6V DC, 0.23 amps
Approximately 4.5" x 4.5", with an 8.25" wiring harness and plug
Direct drop-in replacement matching the original mounting and connections
Replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
Compatible with GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically 15 to 30 minutes
Product Specifications
Part Number
WR60X25858
Part Type
Freezer Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
13.6V DC
Amperage
0.23 A
Fan Dimensions
Approx. 4.5" x 4.5"
Harness/Plug Length
Approx. 8.25" from frame
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Profile, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Clear Any Frost Or Ice From The Fan Area Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor in the freezer compartment, typically behind an interior panel covering the evaporator coil assembly. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing — restricted airflow from ice is a common contributor to fan motor strain and noise. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new WR60X25858 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. While you're in this area, vacuuming out any accessible condenser coils is a good complementary maintenance step. Restore power and monitor the freezer's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer isn't cold anymore. Is this the part I need?
Yes, this is one of the most common causes of a freezer that won't cool. One customer specifically reached out after their freezer wasn't cold, watched a diagnostic video explaining the evaporator fan's role, and confirmed this motor was the cause before ordering the replacement.
I hear a strange noise from inside my freezer. Could this be the fan motor?
Yes, this is a well-documented symptom. Noise often occurs when the fan motor itself is wearing out, or when frost or ice has built up enough to rub against the spinning fan blade. Clearing any ice buildup before replacing the motor helps you confirm whether the noise was from ice contact or the motor itself.
Should I do anything else while I have the freezer open for this repair?
It's a good opportunity to check for and clear any frost or ice buildup around the fan and coil area, since restricted airflow can contribute to fan strain. One customer also vacuumed out the condenser coils during the same repair, which is a reasonable companion maintenance step while everything is accessible.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, voltage, and connection type of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA31-00334C Refrigerator Evaporator Fan Motor
The XPARTCO DA31-00334C is an aftermarket replacement evaporator fan motor for Samsung bottom-mount and side-by-side refrigerators. This small brushless DC (BLDC) motor sits behind the freezer's rear panel, directly in front of the evaporator coil, and its job is to pull cold air off that coil and push it through the duct system into both the freezer and fresh food compartments. Without it circulating air, the coil itself keeps getting cold, but that cold air never reaches your food — the freezer may still work reasonably well since it sits closer to the coil, while the fresh food side drifts warmer and warmer since it depends entirely on ducted airflow from the back.
Rated at 12V DC, 2.5W, 0.12A, running at approximately 1,870 RPM. As a brushless design, this motor has no physical brushes to wear out, so failure typically comes from a worn bearing that lets the blade wobble or bind, a winding that has burned out electrically, or a blade that has become jammed by a chunk of built-up frost or freezer debris. It directly replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, and EAP12590897. Also compatible with select Kenmore refrigerators built on the Samsung platform.
Quick Answer
The XPARTCO DA31-00334C Refrigerator Evaporator Fan Motor fixes Samsung bottom-mount and side-by-side refrigerators with uneven cooling, a fresh food compartment that's warmer than it should be, frost or ice buildup at the back or bottom of the freezer, or a grinding/buzzing noise from inside the cabinet. Brushless DC (BLDC) motor, 12V DC, 2.5W, 0.12A, ~1,870 RPM. Replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, EAP12590897. Verify your model number before ordering — Samsung uses several different evaporator fan motors, and this is not the same part as our DA81-06013A listing.
Common Problems This Part Fixes
Fresh food compartment running warmer than the freezer, or warmer than it used to
Uneven temperatures between shelves or between the fresh food and freezer sides
Frost or ice buildup accumulating at the back panel or bottom of the freezer
Grinding, buzzing, or rattling noise coming from inside the refrigerator cabinet
Noise that stops when the freezer door is opened and starts again once it's closed
Freezer holding temperature reasonably well while the fresh food side drifts warm
Fan blade that doesn't spin freely, or spins with noticeable wobble, when checked by hand
Refrigerator running constantly as the compressor tries to compensate for poor air circulation
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
DA31-00334C, DA31-00287B, DA96-00968A, 12035GE-12M-YT, 12V DC 0.26A, ARES2120RA, Model # 12035GE-12M-YT, AP6803162, ASM1061854, EAP12590897, PD00075168, PS12590897.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Samsung bottom-mount and side-by-side refrigerators, and also fits select Kenmore refrigerators built on the Samsung platform.
Note — not the same motor as DA81-06013A: Samsung uses several different evaporator fan motor designs across its refrigerator lineup. The DA31-00334C is a distinct part from our DA81-06013A listing, which is built for a different model family and has its own connector and mounting configuration. Fitting the wrong motor can result in a connector that won't mate with your wiring harness or a fan blade that doesn't clear the housing correctly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Brushless DC (BLDC) evaporator fan motor — no brushes to wear out over time
Circulates cold air from the evaporator coil throughout the freezer and fresh food compartments
Resolves "fresh food too warm," "uneven cooling," "frost buildup," and "grinding or buzzing noise" symptoms caused by fan motor failure
Rated 12V DC, 2.5W, 0.12A, approximately 1,870 RPM
Direct drop-in replacement matching the original mounting bracket and blade fitment
Replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, and EAP12590897
Compatible with select Samsung and Kenmore (Samsung-platform) refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPDA31-00334C
OEM Part Number
DA31-00334C
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
Samsung
Motor Type
Brushless DC (BLDC)
Voltage
12V DC
Wattage
2.5 W
Amperage
0.12 A
Speed
~1,870 RPM
Application
Bottom-Mount and Side-by-Side Refrigerators
Quantity
1 fan motor
Compatible Brands
Samsung, select Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Let The Freezer Thaw If Iced Over Disconnect power at the outlet before beginning, and remove all food from the freezer to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove the shelving and bins as needed, then remove the screws securing the back panel and set it aside to expose the evaporator coil and fan assembly. If you see significant frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours (or run a manual defrost) before continuing, since ice can be masking the actual point of failure and can also make the old motor difficult to remove cleanly. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free — on many models the blade is a separate piece that pulls off the motor shaft. Transfer the fan blade to the new motor if it isn't included, or install the new blade supplied with this motor, matching the original orientation. Mount the new DA31-00334C in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
My freezer seems fine but the fresh food section is warm. Is this really the fan motor?
Yes, this is a very common and telling symptom pattern. The freezer compartment sits right next to the evaporator coil and can stay reasonably cold through simple proximity even with poor air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, while the freezer may seem to lag only slightly behind.
I hear a grinding or buzzing noise that stops when I open the freezer door. What does that mean?
This is a classic symptom of a worn fan motor bearing or a blade that's catching on built-up frost. Opening the door often triggers the refrigerator's internal light switch or door sensor, which can cut power to the fan momentarily — the noise stops because the fan stops spinning, then resumes once the door closes and the fan restarts. If you can see or reach the fan blade with the freezer open, check whether it spins freely and smoothly by hand; a blade that wobbles, binds, or contacts the housing points to the motor as the cause.
There's a lot of frost around the back panel of my freezer. Should I fix that before replacing the fan?
It's worth understanding which came first. Excess frost can be a cause of fan failure — a jammed blade can burn out the motor over time — or a result of it, since poor air circulation lets moisture condense and freeze unevenly around the coil area. Either way, thawing the ice out fully before you install the new motor makes the repair easier and lets you confirm the blade spins freely once everything is defrosted, rather than immediately jamming again on refrozen ice.
Do I need to transfer the fan blade from my old motor?
It depends on what's included with your specific order — check whether a blade came with your new motor before removing the old one. If a blade is not included, the blade from your original motor typically pulls off the shaft and can be transferred over. Photograph the blade's orientation on the shaft before removing it so you can reinstall it the same way; an improperly oriented blade can affect airflow or contact the housing.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 2.5W, 0.12A, ~1,870 RPM), brushless motor design, and mounting configuration of the original DA31-00334C evaporator fan motor used in compatible Samsung and Kenmore refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
OE WR60X10220 Refrigerator Condenser Fan Motor
The OE WR60X10220 is an Original Equipment condenser fan motor for GE-built refrigerators, sourced from the same original manufacturer that supplies this motor for genuine GE production, and shipped in XPARTCO packaging rather than GE retail packaging. The condenser fan motor pulls air across the condenser coils and compressor to dissipate heat, and on many models it also helps evaporate condensate that collects in the drain pan below the compressor. When this motor fails or weakens, the compressor and coils can't shed heat properly, leading to a refrigerator that runs constantly, doesn't cool adequately, or develops a squealing/screeching noise as the motor bearings wear.
It directly replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Located in the rear compressor compartment behind the refrigerator's rear access panel. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The OE WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and Kenmore (GE-built) refrigerators that run constantly, don't cool adequately, or make a squealing/screeching noise from the compressor compartment. This is an Original Equipment motor — same manufacturer as genuine GE production, packaged as XPARTCO rather than GE retail packaging. 115V. Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Classic symptom: loud squealing or screeching noise coming from behind the fridge.
Common Problems This Part Fixes
Refrigerator runs constantly and doesn't cycle off normally
Fridge or freezer not cooling adequately or running warm
Loud squealing, screeching, or grinding noise from the rear compressor compartment
Compressor overheating or shutting off on thermal protection
Water pooling under the refrigerator from an overwhelmed drain pan
Condenser fan blade not spinning, or spinning slowly/intermittently
What Is an OE Part?
OE ("Original Equipment") parts are sourced from the same original manufacturer that supplies the component for genuine factory production — not a different aftermarket maker. The difference from a "Genuine OEM" listing is packaging: an OE part ships in XPARTCO packaging instead of the appliance brand's retail box, at a lower cost, while the part itself comes off the same production line. OE is a separate designation from our XPARTCO aftermarket brand and is never labeled with an XPARTCO prefix.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with a wide range of GE-built refrigerators from the following brands:
GE refrigerators (including GSL22JFPDBS-BS, GSS25WGPHBB, GSL25JFPHBS, and related side-by-side and bottom-freezer models)
Hotpoint refrigerators (GE-built models, including HSM25GFRFSA)
RCA refrigerators (GE-built models)
Kenmore refrigerators (select GE-built models)
Note: This motor is used across a large number of GE-platform refrigerator models. Always verify your appliance model number before ordering, since evaporator fan motors and condenser fan motors are different components that are easy to confuse — an evaporator fan sits inside the freezer compartment, while this condenser fan sits in the rear compressor compartment.
Key Features
Original Equipment condenser fan motor — same manufacturer source as genuine GE production
Resolves "runs constantly," "not cooling," and "squealing noise" symptoms caused by motor failure
Pulls air across the condenser coils and compressor to dissipate heat
Helps evaporate excess condensate collecting in the drain pan on many models
115V rated motor matching original electrical specifications
Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
Compatible with GE, Hotpoint, RCA, and Kenmore refrigerators
Same production source as the genuine part, in XPARTCO packaging at a lower cost
Product Specifications
Part Number
WR60X10220-OE
OEM Part Number
WR60X10220
Part Type
Refrigerator Condenser Fan Motor
Condition
Original Equipment (OE) — XPARTCO Packaging
Voltage
115V
Location
Rear Compressor Compartment
Function
Cools condenser coils/compressor; assists drain pan evaporation
Compatible Brands
GE, Hotpoint, RCA, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power before beginning. Pull the refrigerator away from the wall and remove the rear access panel over the compressor compartment (typically several screws around the perimeter). Locate the condenser fan motor and blade near the compressor. Photograph the wiring before disconnecting. Unplug the motor's wiring harness connector. Remove the mounting screws or bracket clip holding the motor in place, and note the orientation of the fan blade on the motor shaft before removing it — the blade must be reinstalled facing the same direction to move air correctly. Transfer the fan blade to the new WR60X10220 motor, or install the blade included with your kit in the same orientation. Mount the new motor in the same position and secure it. Reconnect the wiring harness, matching your photos. Reinstall the rear access panel, restore power, and confirm the fan spins freely and the compressor area cools down normally after running. Tools needed: nut driver or screwdriver, needle-nose pliers (for wiring connectors).
Frequently Asked Questions
What's the difference between this OE part and a "Genuine OEM" listing?
Both come from the same original manufacturer as factory production — the difference is packaging and price. A Genuine OEM listing ships in the appliance brand's own retail box; this OE part ships in XPARTCO packaging at a lower cost, with no difference in the motor itself.
My fridge is making a loud squealing noise — is this the part I need?
Very likely, yes. A squealing or screeching noise from behind the refrigerator, especially one that gets louder over time, is one of the most common symptoms of a failing condenser fan motor as its bearings wear out. Pull the unit out and listen near the rear compressor compartment to confirm the noise is coming from that area before ordering.
Is this the same as an evaporator fan motor?
No — these are different components serving different purposes, and it's easy to order the wrong one. The evaporator fan motor is inside the freezer compartment and circulates cold air through the fridge and freezer. This condenser fan motor is in the rear compressor compartment and cools the compressor and condenser coils. Confirm which one your model uses based on symptoms and location before ordering.
Do I need to transfer the fan blade from my old motor?
On many models, yes — the fan blade is a separate component that mounts onto the motor shaft, and you'll transfer it from the old motor to the new one, noting its orientation first. Some kits include a new blade; check what's included with your specific motor before starting the repair.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Original Equipment Source ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
5304532557 Refrigerator Genuine Evaporator Motor
Replaces Part Numbers: 5304532557, 242077707, AP7194947, PS16745551.
Description: This Part is a Genuine OEM refrigerator evaporator fan motor compatible with specific Electrolux, Frigidaire refrigerator models. The fan motor is a vital component of your refrigerator. It is designed to maintain cold temperatures by circulating air through the fresh food compartments. By doing so, it ensures uniform cooling within the refrigerator. This helps to prevent warm spots that can lead to frost build-up.
XPARTCO 4681JB1029B Refrigerator Condenser Fan Motor
13Vdc, 1.55W, 120mA, CCW.
Fits specific LG refrigerator models.
Replaces Part Numbers: 4681JB1029B, 4681JB1017B, 4681JB1017E, 4681JB1027B, AP4437343, OEM17749374, PS3523329.
Description: This Condenser Fan Motor is a replacement part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W11224591 Refrigerator Evaporator Fan Motor
The XPARTCO W11224591 is an aftermarket replacement freezer evaporator fan motor assembly compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore bottom-mount French door refrigerators. The evaporator fan motor is located in the freezer compartment behind the rear panel — it draws cold air across the evaporator coils and circulates it throughout both the freezer and the fresh food compartment. This constant air movement is what keeps temperatures even and food fresh. When the fan motor fails, the most common symptom is telling: the refrigerator (fresh food) compartment stops cooling while the freezer stays cold but doesn't reach full capacity, because the fan is no longer moving the cold air up into the fridge section.
This is a complete assembly that includes the fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat — everything integrated into one replaceable unit. Finished in white. As a direct replacement for the Whirlpool W11224591, it also replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521. Motor failure typically results from normal wear, obstruction from frost or debris rubbing the fan blade, or motor winding issues. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO W11224591 Refrigerator Evaporator Fan Motor fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, and Amana bottom-mount French door refrigerators where the fridge section is warm but the freezer is cold, temperatures are uneven, frost builds up on the coils, or unusual noise comes from the freezer compartment. Complete assembly — includes fan motor, wiring harness, temperature sensor, and defrost thermostat. White finish. Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, PS12349521. Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series and related models.
Common Problems This Part Fixes
Refrigerator (fresh food) compartment warm while the freezer stays cold — the signature symptom of evaporator fan motor failure
Uneven or inconsistent temperatures throughout the refrigerator
Unusual noises from the freezer compartment — grinding, squealing, or clicking as the motor bearings fail or the blade rubs on frost/ice
Frost or ice buildup around the cooling sections and evaporator coils
Refrigerator running continuously or more frequently than usual to compensate for poor air circulation
Noticeable decrease in overall cooling efficiency
Food spoiling faster than normal in the fresh food compartment
Fan motor not spinning at all when the compressor is running
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor assembly directly replaces the following OEM and cross-reference part numbers:
W11224591, W10865431, 4844712, W10728111, W11215582, AP6329809, AWP43665, EAP11738038, FIX12349521, DLB5985WPEB, PD00052715, PS12349521.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select bottom-mount French door refrigerators from the following brands:
Whirlpool refrigerators — WRF757SDHV00, WRF757SDHZ00/Z01/Z02, WRF767SDHV00/V02, WRF767SDHZ00/Z01/Z02 series
Whirlpool refrigerators — WRF736SDAB14, WRF736SDAM14, WRF736SDAW14, 7WF736SDAM14 series
KitchenAid refrigerators — KRFF507HPS00/PS01/PS02, KRFF507HBS02, KRFF507HWH02 series
Maytag refrigerators — MFT2574DEH02 and related bottom-mount French door models
Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper refrigerators — select Whirlpool-built models
Kenmore / Sears and Ikea refrigerators — select Whirlpool-built models
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete evaporator fan motor assembly — includes fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat in one integrated unit
Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments for even temperatures
Resolves the classic "fridge warm, freezer cold" symptom of evaporator fan failure
Prevents frost buildup by maintaining proper airflow across the coils
White finish, direct-fit replacement using original mounting points and connectors
Because the assembly bundles the defrost thermostat and temperature sensor, it addresses multiple potential failure points in a single repair
Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521
Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series, plus Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea Whirlpool-built bottom-mount refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
W11224591
Part Type
Freezer Evaporator Fan Motor Assembly
Condition
Aftermarket Replacement
Application
Bottom-Mount French Door Refrigerators (Whirlpool platform)
Assembly Includes
Fan Motor, Wiring Harness, Temperature Sensor (Thermistor), Defrost Thermostat
Location
Freezer compartment, behind rear panel
Color
White
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located in the freezer compartment behind the rear access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's frost or ice buildup on the rear panel or coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Remove the screws securing the rear freezer access panel and lift it away to expose the evaporator coils and fan motor assembly. Photograph the wiring harness connections and the fan motor orientation before disconnecting anything. Disconnect the wire harness connectors from the old assembly and release it from its mounting points. Lift out the old fan motor assembly. Install the new W11224591 assembly using the original mounting points and connectors — since this is a complete assembly, the fan motor, harness, temperature sensor, and defrost thermostat all transfer as one unit. Reconnect the wiring harness, matching your photos. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Test airflow and temperature consistency before considering the job complete. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
My refrigerator section is warm but the freezer is still cold — is this the fan motor?
This is the single most common and telling symptom of a failed evaporator fan motor on these bottom-mount French door refrigerators. Here's why: the evaporator coils (which produce the cold) are in the freezer, and the evaporator fan is what pushes that cold air up into the fresh food compartment. When the fan motor fails, the freezer stays cold (it's right next to the coils) but the fridge section warms up because no air is being circulated to it. If your freezer is cold and your fridge is warm, the evaporator fan motor is the prime suspect. You can confirm by listening for the fan running when the compressor is on, or opening the freezer rear panel to see if the fan spins.
What's included with this part — is it just the motor?
This is a complete assembly, not just the bare motor. It includes the fan motor, the wiring harness, the temperature sensor (thermistor), and the defrost thermostat — all integrated into one unit. This is actually an advantage: since these components live together in the freezer compartment and can each cause cooling problems, replacing them as a bundle addresses multiple potential failure points in a single repair, reducing the chance you'll be back in the freezer compartment a few months later for a related part.
Why is my evaporator fan making noise?
A noisy evaporator fan usually means one of two things: the motor bearings are wearing out (producing grinding or squealing), or the fan blade is rubbing against frost or ice that has built up around it. If frost buildup is the cause, that often points to a secondary problem with the defrost system (defrost heater, thermostat, or control) allowing ice to accumulate where it shouldn't. Since this replacement assembly includes a new defrost thermostat, it addresses one of the common defrost-related causes. If heavy frost keeps returning after replacement, the defrost heater or control board should be investigated next.
Do I need to defrost the freezer before installing this?
If there's frost or ice buildup on the rear freezer panel or evaporator coils, yes — clear it before installing the new assembly. Leave the freezer empty and unplugged with the door open for several hours (longer for heavy ice) to let everything thaw naturally, placing towels at the base to catch melt water. Never chip or pry ice off the evaporator coils with a tool — the aluminum fins are delicate and a damaged coil is a far more expensive repair. Once everything is fully thawed and dried, proceed with the fan motor replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the fit, mounting points, connector configuration, and function of the original W11224591 evaporator fan motor assembly used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore bottom-mount French door refrigerators — including the integrated harness, temperature sensor, and defrost thermostat.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WR60X10185 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X10185 is a genuine GE OEM evaporator fan motor located in the freezer compartment, for GE, Hotpoint, and select Kenmore, Haier, Monogram, and Café refrigerators. This motor pulls air across the evaporator coils to strip heat from it, then circulates that cold air through the freezer and, via ducting, to the fresh food compartment. This particular motor does not include a thermistor — it ships as a fan motor with a 4-wire harness on a 6-pin connector, with two of those six pin slots left empty. If your refrigerator's original connector has a white thermistor wire in it, or a separate connector for a freezer light, this is not the correct motor for your unit.
Rated 9.75V DC, 3.25W. A fan motor generally has a long service life, but it can burn out quickly if debris or ice buildup obstructs the blade and forces the motor to work against resistance it wasn't designed for. Common symptoms of a failing motor include unusual noise from the freezer, a fresh food compartment that's warmer than it should be while the freezer stays reasonably cold, frost or ice accumulating around the fan or coil, and a refrigerator that runs constantly trying to compensate for lost circulation. It directly replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, EAP1019114, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, and WR60X10157.
Quick Answer
The WR60X10185 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, and select Kenmore refrigerators where the fresh food section runs warm while the freezer stays cold, there's unusual noise from the freezer, or frost is building up around the coil. 9.75V DC, 3.25W, 4-wire harness on a 6-pin connector (2 pins empty). Does NOT include a thermistor. Replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, WR23X10353, WR23X10355, WR23X10364, WR60X10043, WR60X10154, and others listed below. If your old connector has a white thermistor wire, you need WR60X10074 instead; if it has a light connector, you need WR23X10467.
Common Problems This Part Fixes
Fresh food compartment running warmer than normal while the freezer stays reasonably cold
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Freezer not cooling properly, which in turn affects compressor performance
Frost or ice buildup accumulating around the fan blade or evaporator coil
Refrigerator running continuously as it struggles to maintain temperature
Fan motor that has burned out due to an obstruction preventing the blade from turning
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10185, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, WR60X10157, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, 197D2039P013, 1170107, UDQT26GE4, AP3875639, AGE29155, PD00000986, PS1019114, EAP1019114
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform.
Note — check your connector before ordering: GE uses several different evaporator fan motor variants that look nearly identical, and choosing the wrong one means the connector or function won't match your refrigerator. This WR60X10185 motor has no thermistor and a plain 4-wire harness with 2 empty slots on its 6-pin connector. If your old motor's connector has a white thermistor wire in it, you need WR60X10074 instead (harness with integrated thermistor). If your old connector instead has a dedicated light connector, you need WR23X10467. This part is also a separate motor from our WR60X10318 listing, which is a side-by-side platform assembly with its own integrated thermistor and a longer harness. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Genuine GE OEM part — factory-specified motor and blade design
Pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments
Resolves "fresh food warm while freezer stays cold," "unusual noise," and "frost buildup" symptoms caused by fan motor failure
Rated 9.75V DC, 3.25W
Includes the fan motor and 4-wire harness assembly (does not include thermistor)
Direct drop-in replacement matching the original mounting and blade fitment
Replaces a wide range of legacy WR23X and WR60X part numbers plus AP3875639 and PS1019114
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WR60X10185
Part Type
Refrigerator Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
9.75V DC
Wattage
3.25 W
Harness
4-wire, 6-pin connector (2 pins unused)
Includes Thermistor
No
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check Your Connector Type First Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before removing the old motor, look closely at its connector: confirm it's a plain 4-wire harness with no thermistor wire and no separate light connector, matching this replacement. Access is through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10185 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How do I know if I need this motor or the one with the thermistor?
Look directly at your old motor's electrical connector before ordering. This WR60X10185 motor has a plain 4-wire harness on a 6-pin plug, with two of the six pin positions left empty — there's no thermistor wire involved. If your connector instead has a white thermistor wire running into it, you'll need WR60X10074, which includes an integrated thermistor and is not interchangeable with this motor. If your connector has a separate plug specifically for a freezer light, you'll need WR23X10467 instead.
My fresh food section is warm but the freezer seems fine. Is this the right part?
Yes, this is a very common and telling symptom pattern. The freezer sits right next to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, and GE's own guidance confirms that a fresh-food-warm/freezer-fine pattern points to this fan.
Why would a fan motor "burn out quickly" instead of just wearing out slowly?
While this motor generally has a long service life, it can fail rapidly if something obstructs the fan blade from turning — commonly built-up frost or ice, or occasionally debris. When the blade can't turn freely, the motor works against resistance it wasn't designed for, which accelerates internal wear and can burn it out much faster than normal aging would. Clearing ice from around the fan before or during replacement helps prevent stressing the new motor the same way.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original 9.75V, 3.25W motor design, blade fitment, and 4-wire harness configuration of the fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor - Compatible with GE, Hotpoint, RCA, Kenmore
Product Description
Restore efficient cooling with the Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor. This OEM evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, delivering reliable performance as an authentic GE part.
Note: Includes one evaporator fan motor with 6-pin harness and thermistor. Disconnect power before installation. Check evaporator fan blade and related components (e.g., thermistor) for optimal performance.
Replaces part numbers: WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950.
Compatibility:
Compatible with models including but not limited to:
GE: 39631UGTAWW, 39631UGXAWW, 39639USTAGV, GSS25SGMDBS, GSS25WGMDBB, GSS25WGMDBB, HSS25GFPAWW, PSS26SGPASS
Hotpoint: HSS25IFMDWW, HSS25IFMCCC
RCA: RSG20IDMBFWW
Kenmore: 363.58541890, 363.58542890
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and Kenmore refrigerators.
❄️ Specifications: OEM evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor.
💪 Reliable Performance: Authentic GE part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes.
🛡️ Effective Fixes: Resolves noisy operation, inconsistent temperatures, frost buildup, or refrigerator running continuously.
Product Specification
Part Number: Genuine GE WR60X10307
Component Type: Refrigerator evaporator fan motor
Material: Plastic housing, metal motor components
Electrical Specs: 9.75V DC, 3.25W
Mounting: Screw-mounted in freezer compartment behind evaporator cover
Operating Conditions: Suitable for low-temperature refrigerator environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
XPARTCO W10124096 Refrigerator Condenser Fan Motor
The XPARTCO W10124096 is an aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators, including Kenmore, Maytag, KitchenAid, Amana, and Jenn-Air models. The condenser fan motor pulls air across the condenser coils to carry heat away from the refrigerant. When the motor wears out or fails, the refrigerator may run warmer than normal, cool poorly, or make unusual noise.
The kit includes the fan motor, a fan blade, and a jumper wire harness for installations where the original motor used a 3-pin connector. It replaces many earlier Whirlpool motor numbers, so the new kit may look different from your original motor. This is the condenser fan, near the compressor, not the evaporator fan inside the freezer or fresh food compartment.
Quick Answer
The XPARTCO W10124096 Condenser Fan Motor Kit fixes a Whirlpool-built refrigerator that runs warm, cools poorly, or makes noise because the condenser fan motor has failed. Kit includes the motor, fan blade, and jumper harness. Classic symptom: the compressor area is noisy, or the condenser fan doesn't spin while the compressor runs.
Common Problems This Part Fixes
Refrigerator running warmer than usual or cooling poorly
Noisy refrigerator near the compressor
Condenser fan not running
Worn or damaged condenser fan motor or blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan motor kit directly replaces the following part numbers:
W10124096, 1378525, 2188538, 2188727, 2188728, 2188729, 2188732, 2188891, 2206005, 2315538, 2315558, W10124096VP, W10130108, W10204250, W10509333, W10861645, AH1957416, AP4318657, AWP40429, EA1957416, EAP1957416, PD00002509, PS1957416
These numbers span several generations of Whirlpool's own part numbering for this motor. Confirm against your refrigerator's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This condenser fan motor kit is listed for Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, and Jenn-Air refrigerators, including these examples:
Models ED5FHAXSB03, 8ET1FTKXKT05, GI15NDXTB0, 7GD27DIXHB00
Models 10644022600, 10653254200, BRS62ABANA00, MSD2658KES02
Note: The models above are a small sample of a list of hundreds, not a full list. Some retailer lists include drawer and bin models, so verify fit with your full model number. Contact our support team to confirm fit before ordering.
Key Features
Aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators
Kit includes the fan motor, fan blade, and a jumper wire harness for 3-pin connectors
Moves air across the condenser coils to help the refrigerator cool
Resolves warm-running and noise problems caused by a failed motor
Replaces 13 earlier Whirlpool part numbers
Product Specifications
Part Number
XPW10124096
OEM Part Number
W10124096
Part Type
Refrigerator Condenser Fan Motor Kit
Condition
Aftermarket Replacement
Kit Includes
Fan Motor, Fan Blade, Jumper Wire Harness
Application
Whirlpool, Kenmore, Maytag, KitchenAid, Amana & Jenn-Air Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator before beginning, and move perishable food to a cooler or another refrigerator. Wear work gloves. Follow your model's service guide to reach the condenser fan, which is near the compressor. Note how the wiring is connected, disconnect it, and remove the old motor and blade. Fit the new motor and blade in the same position and reconnect the wiring. Use the supplied jumper harness only if your original motor used a 3-pin connector. Restore power and check that the fan runs.
Frequently Asked Questions
My refrigerator is running warm. Is this the part I need?
A failed condenser fan motor is one possible cause, since the condenser can't shed heat without airflow. Check that the condenser coils are clean and that the fan turns freely. If the fan doesn't run or the motor is noisy or worn, this kit is the repair.
Is this the condenser fan or the evaporator fan?
This is the condenser fan motor, which cools the condenser coils near the compressor. The evaporator fan is a different part located inside the cabinet. Check your parts diagram if you are unsure.
When do I use the jumper wire harness?
The kit includes a jumper harness for installations where the original motor used a 3-pin connector. If your original connector is different, compare it to the new motor, or contact our support team.
Will this fit my refrigerator?
It is listed for hundreds of Whirlpool-built refrigerators, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA31-00342A Refrigerator Evaporator Fan Motor - Compatible with Samsung Refrigerators
Product Description
Restore optimal cooling in your refrigerator with the replacement DA31-00342A Refrigerator Evaporator Fan Motor. This high-quality replacement evaporator fan motor, designed for Samsung refrigerators, circulates chilled air through the fresh food and freezer compartments to maintain even temperatures. Constructed from durable plastic with sticky insulation and a silent sponge for quiet operation, this DC motor (12V, 4.2W, 0.35A, 1850 RPM) addresses issues like temperature fluctuations, frost buildup, or noisy operation.
Note: Includes one evaporator fan motor with 3-pin connector and 60cm wire;. Disconnect power before installation.
Replaces part numbers: DA31-00342A, EAP12590899, 4982090, ARES2130RA, PD00080451, EAP12590899, AP6803165, PS12590899
Compatibility:
Compatible with models including but not limited to:
Samsung: DA31-00342A Refrigerator FAN is the correct replacement for model numbers. RM80F22WEWAA RM70F22NERAA RM80F23VMRAA RF32CG5B10SRAA RF27CG5B10SRAA DRZ30980RAP/DA DRZ30980LAP/DA DRZ36980RAP/DA DRZ36980LAP/DA RQ48T9432T1/AA RS28A5F61SG/AA RS27T5202SR/AA RQ48T94B277/AA RS28A500ASR/AA RS28A500ASG/AA RS22T5561SR/AA RF32CG5N10SRAA RS27T5200WW/AA RS23A500ASG/AA RS28A5F61SR/AA RF32CG5900MTAC RS23CB7600QLAA RF32CG5900SRAA RF27CG5900SRAA RF32CG5100SRAA RF26CG7400SRAA RF27CG5400SRAA RF32CG5400MTAA RF31CG7400MTAA RF27CG5100SRAA RS23CB760012AA RF31CG7200SRAA RF32CG5100MTAA RF27CG5010S9AA RF32CG5400SRAA RF32CG5300SRAA RS28CB7600QLAA RS28CB760012AA RF31CG7400SRAA RF31CG7220SRAA DRZ36980RAP/DA DRZ30990LAP/DA DRZ30980RAP/DA DRZ36980LAP/DA DRZ30990RAP/DA DRZ30980LAP/DA RS22T5561SG/AA RS27T5561SG/AA RS23A500ASR/AA RS27T5561SR/AA RS27T5201SR/AA RS27T5200SR/AA RS22T5561SR RS27T5200SG/AA RS22T5201SR/AA
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung refrigerator models.
🔥 Specifications: replacement evaporator fan motor, DC 12V, 4.2W, 0.35A, 1850 RPM, 3-pin connector, 60cm/23.62" wire length, 5.3" fan diameter, plastic construction with sticky insulation and silent sponge for quiet operation.
💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a Phillips screwdriver, work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves poor cooling, frost buildup, noisy operation (grinding or buzzing), or evaporator coil freezing.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a budget-friendly fix!
