Search results for "washer gasket"

XPARTCO WH16X29509 Washer Damper Vent The XPARTCO WH16X29509 is an aftermarket replacement washer damper vent compatible with select GE, Hotpoint, RCA, and Kenmore front-load washers in the GFW510, GFW550, and GFW650 series. The damper vent is a one-way flap valve located on the drain system that automatically opens during draining to equalize pressure inside the drain pipe, allowing water to drain quickly and completely. When closed, it seals the drain path to prevent backflow of residual dirty water and lint from re-entering the drum and soiling clean laundry. Made from high-strength plastic with a reinforced hinge mechanism, this damper vent is designed to resist deformation under high-frequency operation and to prevent lint accumulation that can cause blockages. It directly replaces OEM part numbers WH16X29509, 4982970, AP6990392, and several additional cross-reference numbers. Snap-in installation requires no special tools and takes just minutes to complete. Quick Answer The XPARTCO WH16X29509 Washer Damper Vent fixes GE front-load washers displaying error codes 38, 39, 40, or 84, draining slowly, or returning dirty water or lint to clean clothes. The damper opens during draining and closes to block backflow. Compatible with GE GFW510, GFW550, and GFW650 series. Snap-in installation — no tools required. Common Problems This Part Fixes Slow or incomplete draining during the wash or spin cycle Dirty water or lint backflowing into the drum and soiling clean laundry Washer not draining fully, leaving standing water in the drum Drain hose blockages caused by a stuck or failed damper vent flap Moisture or odor buildup inside the washer due to poor drain ventilation Replaces Part Numbers This washer damper vent directly replaces the following OEM and cross-reference part numbers: WH16X29509, EAP16219913, FIX16219913, AGE26992, PD00079480, AP6990392, PS16219913. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This damper vent is compatible with select front-load washers from the following brands and series: GE front-load washers — GFW510 series GE front-load washers — GFW550 series GE front-load washers — GFW650 series GE front-load washers — GFW850 series (select models) GE Profile front-load washers — PFW series (select models) Hotpoint front-load washers (select models) RCA front-load washers (select models) Kenmore / Sears front-load washers (select GE-built models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features One-way flap valve — opens automatically during draining to equalize pipe pressure and ensure fast, complete drainage Seals shut when not draining — blocks residual dirty water and lint from backflowing into the drum and re-soiling clean laundry High-strength plastic construction with reinforced hinge — resists deformation under high-frequency operation Optimized airflow design minimizes lint accumulation for long-lasting, clog-free performance Heat-resistant materials — withstands high-temperature wash programs Direct replacement for WH16X29509 — snap-in installation, no special tools required Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number WH16X29509 Part Type Washer Damper Vent (Drain Vent Flap Valve) Condition Aftermarket Replacement Application Front-Load Washers Function Equalizes drain pipe pressure during draining; blocks backflow when closed Material High-strength plastic Installation Snap-in — no special tools required Error Codes Resolved 38, 39, 40, 84 (on compatible GE models) Compatible Series GFW510, GFW550, GFW650, GFW850, PFW (select models) Compatible Brands GE, Hotpoint, RCA, Kenmore Installation Notes ⚠️ Unplug Washer Before Starting Unplug the washer from the power outlet before beginning any repair. The damper vent is located in the drain system — typically accessible from the front lower panel or by removing the washer's access panel. Locate the existing damper vent on the drain hose or drain port. Press the tabs or release clips to remove the old damper vent from its snap-in mounting position. Align the new WH16X29509 damper vent with the mounting port and press firmly until it snaps into place. Restore power and run a short drain or rinse cycle to verify the washer drains correctly and no error codes are displayed. Tools needed: None for the damper vent itself; a screwdriver may be needed to remove the access panel on some models. Frequently Asked Questions What does the washer damper vent do? The damper vent is a one-way valve on the washer's drain system. During the drain cycle, it opens automatically to equalize the air pressure inside the drain hose, which allows water to drain quickly and completely. When draining stops, the flap closes to create a seal that prevents residual wastewater and lint from flowing back up the drain hose and into the drum — which would re-soil clothes that have already been washed. What error codes does a failed damper vent cause on GE washers? A blocked, stuck, or failed WH16X29509 damper vent is a known cause of error codes 38, 39, 40, and 84 on compatible GE GFW510, GFW550, and GFW650 series front-load washers. These codes are typically triggered when the control board detects a drain pressure or flow issue. Replacing the damper vent resolves the issue in many cases when the drain pump and hose are otherwise clear. How do I know if my damper vent has failed? Common signs of a failed damper vent include slow or incomplete draining, one of the error codes listed above, dirty water or lint reappearing on clothes after a wash cycle, or a stuck flap that is visibly open or closed when it should not be. You can inspect the damper vent by removing the access panel and checking whether the flap moves freely — it should open easily when you apply gentle pressure and spring closed when released. Is the WH16X29509 compatible with GE Profile and GE Café washers? The WH16X29509 is confirmed compatible with select GFW and PFW series models from GE and GE Profile. GE Café washers use different model series — verify your specific model number before ordering. Contact our support team if you need help confirming compatibility for your Café or Profile model. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from high-strength plastic to match the dimensions and performance of the original WH16X29509 damper vent. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

XPARTCO WH01X20826 Washing Machine Shock Absorber The XPARTCO WH01X20826 is an aftermarket replacement shock absorber (damper) for GE front-load washers. The wash tub inside a front-load washer hangs suspended inside the cabinet, and a set of these shock absorbers is what controls that movement — dampening the tub's vibration and motion during spin so it doesn't bang against the cabinet or shake the whole machine. These washers typically use four shock absorbers working together around the tub, and this listing is for a single individual shock absorber. Over time the internal damping material in these shocks wears out, or the shock can physically separate from its mounting point — something that can also happen if the washer is moved or shifted without the tub properly secured first. Because all four shocks on a given washer are typically the same age and under the same stress, if one has failed the others are often not far behind — many technicians recommend ordering four of this same part and replacing the full set together as a preventative measure. A worn or detached shock absorber produces a very recognizable symptom: excessive vibration, shaking, or banging noise during the spin cycle, sometimes strong enough that the washer visibly moves or "walks" across the floor. It directly replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130. Quick Answer The XPARTCO WH01X20826 Washing Machine Shock Absorber fixes GE front-load washers (and select Hotpoint, Haier, Monogram, Café, and Kenmore models built on the GE platform) that vibrate, shake, or bang excessively during spin, or seem to "walk" across the floor. Sold as a single individual shock absorber. Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130. These washers use four shock absorbers total — if one has failed, order four of this part to replace the full set, since they wear on the same schedule. Common Problems This Part Fixes Excessive vibration or shaking during the spin cycle Loud banging or knocking noise from inside the cabinet during spin Washer that seems to "walk" or move across the floor during operation Tub striking the cabinet frame or nearby panels Shock absorber that has visibly separated or detached from its mounting point Noise or vibration that started or worsened after the washer was moved or relocated Visible wear, cracking, or looseness in the shock absorber material Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washing machine shock absorber directly replaces the following OEM and cross-reference part numbers: WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This shock absorber is compatible with select GE front-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform. Note: GE uses several different shock absorber part numbers across its washer lineup, including separate parts such as WH01X10727 and WH03X29516 for other platforms. This WH01X20826 shock is specific to the front-load models listed above and is not interchangeable with those other GE shocks. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement shock absorber — dampens tub vibration and movement during spin Sold individually — order four to replace the full set on a typical front-load washer Resolves "excessive vibration," "banging or knocking noise," and "washer walking across the floor" symptoms caused by worn or detached shocks Durable plastic and rubber construction for long-term damping performance Direct drop-in replacement — no modification required Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130. Compatible with GE, Hotpoint, Haier, Monogram, Café, and select Kenmore front-load washers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPWH01X20826 OEM Part Number WH01X20826 Part Type Washing Machine Shock Absorber (Damper) Condition Aftermarket Replacement Application GE Front-Load Washers Material Plastic and rubber Function Dampens tub vibration and movement during spin Typical Quantity Per Washer 4 (this listing is for 1 individual shock) Quantity 1 shock absorber Compatible Brands GE, Hotpoint, Haier, Monogram, Café, Kenmore Installation Notes ⚠️ Unplug Washer Before Starting — Consider Replacing All Four Shocks Together Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access to the shock absorbers typically requires removing the top and/or front panel of the washer to reach the tub suspension points — check your model's service diagram, since access varies. Photograph how each old shock absorber connects to the frame and the tub before removing anything, since these components are symmetrical around the tub and easy to reverse or mismatch. Disconnect the old shock absorber from its mounting point at both the frame and tub ends, and remove the mounting pin. Install the new shock absorber in the same position with its mounting pin, matching the original orientation. If you're only replacing one shock, be aware the remaining three original shocks are the same age and under the same stress — many technicians recommend ordering three more of this same part and replacing all four together to avoid reopening the washer again soon after. Once installed, gently rock the tub by hand to confirm even resistance at each corner before reassembling the panels. Restore power and run a full spin cycle to confirm the vibration, shaking, or banging noise has resolved. Tools needed: Phillips screwdriver, nut driver, work gloves. Frequently Asked Questions Do I need to order more than one of these? This listing is for a single shock absorber, but GE front-load washers use four of them working together around the tub. If one has failed, it's strongly worth ordering four total and replacing the full set, since all four are typically the same age and have been under the same stress — replacing just one risks having to reopen the washer again soon after for the next one. My washer started shaking right after I moved it to a new spot. Is that related? Yes, this is a documented cause of shock absorber problems on this platform. If the tub wasn't properly secured or the washer was tilted significantly during a move, one or more shock absorbers can separate from their mounting point. Check that all four shocks are still properly connected at both ends before assuming a shock itself has failed — sometimes reseating a separated shock is all that's needed, though if it shows wear it's worth replacing regardless. How much vibration is normal, and how do I know it's actually the shocks? Some vibration during high-speed spin is normal, especially with an unbalanced load. But vibration strong enough to move the washer across the floor, or accompanied by a banging or knocking noise from inside the cabinet, points to a suspension problem rather than a simple unbalanced load. Try redistributing the laundry evenly in the drum and running the spin cycle again — if the shaking persists with a balanced load, inspect the shock absorbers for wear, cracking, or separation. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions, mounting configuration, and damping performance of the original WH01X20826 shock absorber used in compatible GE, Hotpoint, Haier, Monogram, Café, and Kenmore front-load washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO EXP570 Dryer Door Latch Kit The XPARTCO EXP570 is an aftermarket replacement door catch and strike kit for dryers from Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis, LG, and other comparable brands. The catch and strike work as a pair: the strike on the dryer door engages the catch on the cabinet to hold the door shut for the whole cycle. When either part wears, cracks, or gets knocked out of alignment, the door stops latching reliably. It may not stay closed, it may pop open mid-cycle and let heat escape, or the dryer may refuse to start because it doesn't register the door as closed. Each kit includes 1 door catch and 1 strike, so you can replace the full latch set in one repair rather than guessing which half is worn. Because this latch design was used across several appliance families, the kit carries a long cross-reference list covering Whirlpool, Frigidaire, GE, LG, and Alliance-built part numbers; see the Replaces list below. Quick Answer The XPARTCO EXP570 Dryer Door Latch Kit fixes a dryer door that won't stay closed, opens mid-cycle, or an open-door condition that keeps the dryer from starting, caused by a worn or damaged catch and strike. Each kit includes 1 door catch and 1 strike. Fits Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis, and LG dryers. Classic symptom: the door swings open on its own, or you have to hold it shut to get the dryer to run. Common Problems This Part Fixes Dryer door won't stay closed Door pops open in the middle of a cycle Dryer won't start because the open-door condition isn't clearing Worn, cracked, or damaged catch or strike Heat escaping around the door, leaving clothes damp Door that no longer latches with a firm, positive click Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door latch kit directly replaces the following part numbers: 5366021400, 5303207102, AP2153772, PS475419, AP2137890, PS455020, LA-1003, LA1003, PS2162263, AP4242465, WE1M1011, WE1X1192, WE1M536, WE1X1195, WE01X1158, WE01X10023, WE01X10188, WE01X10184, AP5324728, PS3502777, AP2042206, PS266893, AP5324728, PS3502777, AP2042209, PS266896, AP2042175, PS266861, AP2042031, PS264343, AP3775568, PS959860, AP5238145, PS959856, WE1X1194, PS266895, AP2042208, WE1M1011, WE1X1192, WE1M536, WE1X1195, WE01X1158, WE01X10023, WE01X10188, WE01X10184, AP5324728, PS3502777, AP2042206, PS266893, AP5324728, PS3502777, AP2042209, PS266896, AP2042175, PS266861, AP2042031, PS264343, AP3775568, PS959860, AP5238145, PS959856, 4027EL2001A, 4026EL3001A, PS3522845, AP5238145, AP5242421, PS3522822, 00491624, AP3735937, PS959856, 5366021400, 5303207102, AP2153772, PS475419, AP2137890, PS455020, 279570. This latch kit was sold under the part numbers of several manufacturers: Whirlpool and Maytag (279570), Frigidaire and Electrolux (5303207102), GE (WE01X10023 and related), LG (4027EL2001A, 4026EL3001A), and Alliance-built dryers (LA-1003). The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical parts. Compatibility This latch kit is used on dryer models from the following brands: Whirlpool, Kenmore (Whirlpool-built), Maytag, Amana, Roper, Estate, and Inglis dryers Frigidaire, Electrolux, and Kenmore (Frigidaire-built) dryers GE and Hotpoint dryers Select LG and Kenmore (LG-built) dryers Select Crosley, Norge, and Speed Queen dryers Note: This kit fits specific models within each brand, not every dryer a brand has made, and the latch design differs between manufacturers. Match the number on your old catch and strike, or on your dryer's parts diagram, against the Replaces list above rather than relying on brand alone. Contact our support team with your model number and we'll verify fit before you order. If only the catch needs replacing, see our single EXP571 Dryer Door Catch. Key Features Aftermarket replacement dryer door latch kit with 1 door catch and 1 strike Replaces both halves of the latch in one repair Restores a secure door closure so heat stays in and the dryer runs efficiently Resolves doors that won't stay shut, open mid-cycle, or trigger an open-door no-start Cross-references to Whirlpool, Frigidaire, GE, LG, and Alliance OEM numbering 1 kit per order Product Specifications Part Number EXP570 OEM Part Number 279570, 5303207102, WE01X10023, 4027EL2001A Part Type Dryer Door Latch Kit (Door Catch & Strike) Condition Aftermarket Replacement Kit Contents 1 Door Catch & 1 Strike Quantity 1 Kit Application Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis & LG Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning. Open the door and inspect the old catch on the cabinet and the strike on the door for cracks, wear, or loose mounting. Remove the old catch and strike, keeping track of how each one is oriented and mounted. Fit the new catch and strike in the same positions and fasten them securely. Close the door and confirm it latches with a firm click, stays shut, and lines up evenly with the cabinet. If the door still won't seat properly after the swap, check the door hinges and alignment, since a misaligned door can wear out new latch parts quickly. Frequently Asked Questions My dryer door won't stay shut — is this the part I need? Very likely. A worn or damaged catch or strike is a common reason a dryer door won't latch or pops open mid-cycle. Inspect both parts for cracks or wear. Because the two work as a pair, replacing both at once is the surest fix. My dryer won't start and seems to think the door is open. Could this be the cause? It can be. If the door isn't latching fully, the dryer may not register it as closed. If the latch looks fine and the door closes firmly but the dryer still won't start, the door switch may be the problem instead. What's included in the kit? Each kit includes 1 door catch and 1 strike. If you only need the catch, we also offer it separately as the EXP571 Dryer Door Catch. Will this fit my Whirlpool, Frigidaire, GE, or LG dryer? This kit is cross-referenced to part numbers from all of those brands, but it fits specific models rather than every dryer. Match the number on your old latch parts or parts diagram against the Replaces list, or contact our support team with your model number and we'll confirm before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

W11688995 Genuine OEM Whirlpool Washer Water Inlet Valve (Cold) The W11688995 is a genuine Whirlpool OEM cold water inlet valve for Whirlpool-built front-load washers. Whirlpool's newer front-load platforms use two separate single-function valves instead of one combined hot/cold valve body — this cold-side valve handles only the cold water supply, while a matching hot-side valve (sold separately as W11688994) handles the hot side. When the control calls for a cold fill, it energizes this valve's solenoid coils to open the water path; when the correct level is reached, the valve closes again. If this valve fails to open, the washer won't take on cold water; if it fails to seal fully closed, water can trickle into the drum even when the washer isn't running. Because this is a dedicated single-function valve, a failure here shows up in a very specific way: cold-only fills stop working or slow down dramatically, while hot-only fills (governed by the separate W11688994 valve) continue working normally. Whirlpool's own service guidance links this valve to F8 E1 and LO FL fill-related error codes. Common failure modes include mineral or sediment buildup that prevents the valve from sealing, a burned-out solenoid coil, or a worn internal diaphragm. It directly replaces W11036930, W11316256, W11486361, AP7218603, PS17216730, and EAP17216730. As a genuine OEM part, the W11688995 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. Quick Answer The W11688995 Genuine OEM Whirlpool Washer Water Inlet Valve (Cold) fixes Whirlpool-built front-load washers where cold water won't fill, fills slowly, overfills, leaks into the drum when off, or throws an F8 E1 or LO FL error code. 120V, 50/60Hz, two-coil cold-only valve, 1/2" NPT threaded connections. Replaces W11036930, W11316256, W11486361, AP7218603, PS17216730, EAP17216730. This is the cold-side valve only — the companion hot-side valve is sold separately as W11688994. Common Problems This Part Fixes Washer won't fill with cold water while hot water fills normally Cold water fills much more slowly than it used to Washer overfills or takes on more water than the cycle calls for Water trickling or leaking into the drum on the cold side when the washer is off F8 E1 or LO FL error code displayed on the control panel Cycle stalling at the fill step and never advancing to wash Cold-wash or cold-rinse cycles specifically affected while warm/hot cycles run fine Water pooling underneath or behind the washer near the cold supply connection Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers: W11688995, W11316256, W11036930, W11486361, 4983050, PD00086086, FIX17216730, EAP17216730, OEM28874414, AP7218603, AWP46809, PS17216730. W11486361 and W11316256 were earlier Whirlpool numbers for this same valve, with W11036930 preceding those. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This cold water inlet valve is compatible with select Whirlpool-built front-load washers across the Whirlpool family of brands, including: Whirlpool front-load washers — WFW series Maytag front-load washers — MHW and MFW series (select Whirlpool-built models) Amana front-load washers (select models) Inglis front-load washers — IFW series (select models) Select Kenmore front-load washers built on the Whirlpool platform Verified model numbers include: 8TWFC6810LW0 (laundry center), IFW5900HW0, IFW5900HW1, IFW5900HW2, IFW5900HW3, IFW5900HW4, MFW7020RF0, MFW7020RU0, MFW7020RW0, MHW5630HC0, MHW5630HC1, MHW5630HC2, MHW5630HC3, MHW5630HW0, MHW5630HW1, MHW5630HW2, MHW5630MBK0, MHW6630HC0 through MHW6630HC3, MHW6630HW0 through MHW6630HW3, MHW6630MBK0, MHW8630HC0 through MHW8630HC3, MHW8630HW0 through MHW8630HW3, WFW560CHW0, WFW560CHW1, WFW560CHW2, WFW5620HW0 through WFW5620HW3, WFW6620HC0 through WFW6620HC2, WFW6620HW0, WFW6620HW1, WFW8620HC0 through WFW8620HC4, WFW8620HW0 through WFW8620HW4, WFW862CHC0, and WFW862CHC1. Note — cold side only: This is the cold water valve. The matching hot water valve for these same washers is sold separately under part number W11688994. The two are not interchangeable — each is a dedicated single-function valve, and installing this cold valve in place of the hot valve (or vice versa) will not correctly control water temperature. If both valves need replacement, order both part numbers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified solenoid, seal, and flow-rate design Dedicated cold-only water inlet valve — two internal coils control flow to the cold supply Resolves "won't fill with cold water," "fills slowly," "overfills," and "leaking into the drum" symptoms caused by valve failure Commonly resolves F8 E1 and LO FL error codes 1/2" NPT threaded connections for standard supply line hookups Direct drop-in replacement for W11036930, W11316256, and W11486361 Replaces W11036930, W11316256, W11486361, AP7218603, PS17216730, and EAP17216730 Compatible with Whirlpool, Maytag, Amana, Inglis, and select Kenmore front-load washers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number W11688995 Part Type Washer Water Inlet Valve — Cold Condition Genuine OEM Brand Whirlpool Application Front-Load Washers (Whirlpool-Built) Voltage 120V Frequency 50/60 Hz Coils 2 (dedicated cold water function) Connection 1/2 in. NPT threaded Companion Part W11688994 (hot water valve, sold separately) Supersedes W11036930, W11316256, W11486361 Quantity 1 valve Compatible Brands Whirlpool, Maytag, Amana, Inglis, select Kenmore Installation Notes ⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Have A Towel Ready Unplug the washer or shut off its circuit breaker, and shut off both the hot and cold water supply valves before beginning. Wear work gloves. Disconnect the cold water supply line from the back of the valve first — have a towel or shallow pan ready, since residual water will spill out. Remove the rear screws securing the top panel, then slide the panel back and lift it off to access the valve assembly from inside the cabinet. Photograph the wiring connections before disconnecting anything, since the hot and cold valves sit side by side and it's easy to cross a wire. Disconnect the electrical connector from the old cold valve, remove its mounting screw or bracket, and pull the valve free — leave the hot valve (W11688994) undisturbed if it isn't also being replaced. Install the new W11688995 in the same position, secure the mounting screw, and reconnect the electrical connector fully. Reattach the cold water supply line, tightening securely by hand plus a partial turn with pliers — avoid overtightening plastic threaded fittings. Reinstall the top panel, restore the water supply, and check the connection for leaks before restoring power. Run a short cycle set to a cold wash and confirm the tub fills at the normal rate with no leaking underneath or behind the washer. Tools needed: 1/4" nut driver or socket, T-20 Torx bit, pliers, towel or shallow pan, work gloves. Frequently Asked Questions Cold water won't fill but hot water works fine. Is this the right part? Yes — that's exactly the symptom pattern this valve addresses. Because your washer uses two separate single-function valves rather than one combined valve, a fault on the cold side only affects cold fills while the hot valve (W11688994) keeps working independently. If cold-specific cycles are the ones failing, this cold valve is the correct part to replace. Do I need to replace both the hot and cold valves at the same time? Not necessarily. Since these are independent single-function valves, you only need to replace the one that has actually failed. If only cold fills are affected, replacing this W11688995 valve alone is sufficient. If both hot and cold fills are having problems, or if the valves are original and quite old, some people choose to replace both at once since they're already accessing the same area — but it's not required. My washer shows an F8 E1 or LO FL error. Does that mean this valve is bad? It's a strong indicator, but check the basics first. These codes generally mean the control didn't see water reach the expected level within its allotted fill time. Before replacing the valve, confirm the cold supply valve at the wall is fully open, check the inlet screen inside the valve port for sediment or debris, and make sure the cold fill hose isn't kinked. If those check out and cold water still won't fill properly, this valve is the likely cause. Can I use this valve on the hot water side instead? No. This is a dedicated cold-water valve, and the hot-water side uses a separate part number, W11688994. The two are built and calibrated for their specific supply line and are not interchangeable — installing the cold valve on the hot side (or vice versa) will not properly control water temperature during the cycle. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It includes the same two-coil solenoid design, seal, and flow-rate calibration as the cold water inlet valve originally installed in your front-load washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

DC66-00777A Washer Genuine OEM Pulsator Cap – Compatible with Samsung Washers Product Description Keep your washer performing like new with the DC66-00777A Washer Genuine OEM Pulsator Cap. This factory-approved cap covers the central bolt on the pulsator (washplate), preventing water, detergent, and debris from entering the hub assembly. A missing or cracked cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this Genuine OEM part ensures a perfect fit, watertight seal, and long-lasting protection. Replaces Part Numbers DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312. Compatibility This Genuine OEM pulsator cap fits select Samsung top-load washers. Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, WA45H7000AW/A2, and WA50M7450AW/A4. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-approved part ensures perfect fit and reliable performance 💧 Protective Design – Seals the washplate bolt area to prevent leaks and corrosion 🔇 Reduces Noise – Helps maintain balanced, quiet spin cycles 🛠️ Tool-Free Installation – Snaps securely into place in seconds 🛡️ Fixes Common Issues – Replaces missing, cracked, or leaking pulsator caps 📐 Product Specification Part Number: DC66-00777A Component Type: Washer Pulsator (Washplate) Cap Material: High-grade molded plastic Color: Silver or gray finish (varies by model) Mounting: Snap-fit installation over pulsator bolt Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Always unplug the washer before performing any maintenance to prevent electrical shock. Steps: Open the washer lid and locate the pulsator (washplate) center. Remove any old or damaged cap remnants. Align the new DC66-00777A cap with the bolt opening. Press firmly until it clicks securely into place. Close the lid and test the washer. ⏱️ Time Required: Less than 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Protect your washer from moisture and debris — Add to Cart Now for a perfect, factory-quality fit!

Read more less

DC97-18682D Washer Genuine Drain Hose Assembly – Compatible with Samsung Washers Product Description Maintain proper water drainage with the DC97-18682D Washer Genuine Drain Hose Assembly. This OEM replacement hose is designed to channel used water safely from your washer to the household drain system. A damaged or clogged drain hose can cause leaks, standing water, or drainage errors. Replacing it with this genuine part restores dependable washer performance and prevents messy water issues. Replaces Part Numbers DC97-18682D, DC97-18682B, DC97-18682C, DC97-18682E, PD00070138, EAP16556783, AP7018854, PS16556783. Compatibility This genuine drain hose assembly is compatible with select Samsung front-load washers. Example compatible models include (but are not limited to): Samsung WF42H5000AW, WF45K6500AW, WF56H9100AW. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Designed specifically for Samsung washers 💧 Reliable Drainage – Ensures proper water flow and prevents backup or leaks 💰 Cost-Effective Solution – Avoids costly water damage and washer breakdowns 🛠️ Easy Installation – Flexible design for quick fit with standard tools 🛡️ Fixes Common Issues – Resolves leaks, clogs, or drain-related error codes 📐 Product Specification Part Number: DC97-18682D Component Type: Washer Drain Hose Assembly Material: Heavy-duty rubber and reinforced plastic fittings Mounting: Direct fit replacement with factory connections Operating Conditions: Standard residential washer use Compliance: Genuine Samsung OEM part 🛠️ Installation Notes Tools Needed: Pliers, screwdriver (if clamps are included) ⚠️ Safety First: Always disconnect power and water supply before beginning any washer repair. Steps: Turn off water supply and unplug washer. Locate drain hose at the back of the washer. Remove hose clamps securing the old drain hose. Detach old hose from washer and household drain. Connect new DC97-18682D drain hose to washer outlet. Secure with clamps and ensure a snug fit into the drain standpipe. Restore water, reconnect power, and test for leaks. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Prevent leaks and drainage problems — Add to Cart Now for a reliable, factory-approved repair!

Read more less

W11307244 Genuine OEM Washer Lid Lock Assembly for Whirlpool, Maytag, Kenmore, Amana Fix your washing machine with the W11307244 Genuine OEM Lid Lock Assembly, designed for top-loading washers from trusted brands like Whirlpool, Maytag, Kenmore, Amana, Crosley, and more. Ensure safety and seamless operation with this high-quality, manufacturer-approved replacement part. Fix issues like a washer that won’t start, stops mid-cycle, or displays lid lock errors with this reliable solution. Product Features 🔒 Genuine OEM Quality: Engineered by Whirlpool for perfect compatibility and long-lasting performance. 🔄 Universal Fit: Replaces part numbers W10682535, W10838613, W10838613VP, W11253733. Compatible with models like Whirlpool WTW5000DW1, Maytag MVWC565FW1, Amana NTW4516FW0, Kenmore 110.2024251, and more (verify with your model number). 🛠️ Easy Installation: Comes with a 3-wire harness for quick setup. Basic tools (screwdriver, putty knife, wrench) needed for DIY repair. ✅ Enhanced Safety: Securely locks the washer lid during cycles to prevent accidents and ensure smooth operation. Why Choose This Lid Lock Assembly? The W11307244 is the ideal solution for common washer issues like: 🚫 Washer failing to start or fill. 🔴 Lid not locking properly, triggering error codes. ⏸️ Machine pausing mid-cycle or during spin. ⚙️ Inconsistent agitation or cycle completion. Unlike generic alternatives, this OEM part guarantees precise fit and durability, saving you time and money on repairs. Compatibility Fits a wide range of top-load washing machines, including: Whirlpool: WTW5000DW1, MVWX655DW1 Maytag: MVWC565FW1, ATW4516HW0 Amana: NTW4516FW0 Kenmore: 110.2024251 Crosley, Roper, Inglis: Various models (check your manual for compatibility). Pro Tip: Confirm your washer’s model number to ensure a perfect fit. Contact us for help verifying compatibility! Installation Guide 🔌 Unplug the washer and turn off the water supply for safety. 🔧 Use a putty knife to release clips and lift the top panel. 🔌 Disconnect the old harness and remove the faulty lock. 🔩 Install the W11307244 assembly, ensuring proper alignment of the bezel. ✅ Reconnect the harness, reassemble, and test the lock before full use. Note: The part may arrive locked; manually unlock it during installation. Watch our installation video for step-by-step guidance. Why Shop With Us? 🚚 Fast, Free Shipping: Same-day dispatch on orders before 2 PM EST. 😊 100% Satisfaction Guarantee: 30-day hassle-free returns. 🧑🔧 Expert Support: Our team is here to assist with compatibility and installation questions. 💸 Competitive Pricing: Get OEM quality at an affordable price. Customer Reviews ⭐⭐⭐⭐⭐ "Fixed my Whirlpool washer in 20 minutes! Easy to install and works perfectly." – Sarah T.⭐⭐⭐⭐⭐ "OEM part made all the difference. My Maytag is back to normal!" – John R.⭐⭐⭐⭐ "Arrived quickly, but needed to unlock it before install. Great product!" – Lisa M. Add to Cart Now! Don’t let a faulty lid lock disrupt your laundry routine. Order the W11307244 Genuine OEM Lid Lock Assembly today and restore your washer’s performance. Limited stock—grab yours now!

Read more less

WH23X29553 Genuine OEM GE Washer Water Valve The WH23X29553 is a genuine GE OEM water inlet valve for GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café models. This valve controls the flow of water into the washer from the household supply line — when the control calls for a fill, the valve's solenoid opens to admit water, and closes again once the correct level is reached. Built with an ABS plastic body and stainless steel components for durability against corrosion. Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use. A failing valve typically shows up as the washer not filling properly, filling too slowly, or leaking water. It directly replaces WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643. Quick Answer The WH23X29553 Genuine OEM GE Washer Water Valve fixes GE front-load washers (and select Hotpoint, RCA, Haier, Monogram, and Café models) that aren't filling properly, are filling too slowly, or are leaking water near the valve connections. Replaces WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643. Not the same part as the similarly-numbered WH23X29538 valve — confirm you have the correct number before ordering. Common Problems This Part Fixes Washer not filling with water, or filling only partially Washer fills much more slowly than it used to Water leaking near the valve connections Cycle stalling at the fill step and never advancing to wash No hot water reaching the tub, or no cold water reaching the tub Washer not washing properly due to insufficient or incorrect-temperature water Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer water inlet valve directly replaces the following OEM and cross-reference part numbers: WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water valve is compatible with select GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café washers built on the GE platform., including model numbers such as: GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN GFW650SSN0WW, GFW650SSN1WW, GFW650SSN2WW, GFW650SSN3WW, GFW650SSN4WW GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW GFW655SSV0WW PFW870SPV0RS PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS Note — not the same as WH23X29538: A similarly-numbered valve, WH23X29538, is a separate part (replaces 4977241, AP6990115, PS16217225, EAP16217225, 33090201, 0024000126GB) used on related but distinct models. The two are easy to confuse given how close the numbers are — always confirm you have the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified solenoid design and flow rate ABS plastic body with stainless steel components for corrosion resistance Resolves "won't fill," "fills slowly," and "leaking near the valve" symptoms caused by valve failure Direct drop-in replacement — matches the original mounting and hose connections Replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WH23X29553 Part Type Washer Water Inlet Valve Condition Genuine OEM Brand GE Application Front-Load Washers Body Material ABS plastic Component Material Stainless steel Quantity 1 valve Compatible Brands GE, Hotpoint, RCA, Haier, Monogram, Café Installation Notes ⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Release The Control Panel Carefully Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. Access to this valve is typically behind the front control panel on many models. When removing the front control panel, avoid pulling it straight out too far — slotted tabs on the right side of the panel can break if forced. Instead, pull the panel gently forward, then slide it to the right to release it cleanly. With the panel released, locate the valve and disconnect the hot and cold water supply hoses, keeping a towel handy for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the outlet hoses from the old valve, remove its mounting screws, and pull it free. Install the new WH23X29553 in the same position, reconnect all outlet hoses to their original positions, reconnect the electrical connector, and secure the mounting screws. Reattach the hot and cold supply hoses, tightening securely. Reinstall the control panel and any surrounding trim, restore the water supply, and check every connection for leaks before restoring power. Run a full test cycle across a few different temperature settings to confirm each fill function works correctly. Tools needed: Phillips screwdriver, pliers, towel, work gloves. Frequently Asked Questions How do I remove the front control panel without breaking it? Avoid pulling the panel straight out with heavy force — the slotted tabs on the right side of the panel can snap if you pull too far. Instead, pull the panel gently forward first, then slide it to the right to release it from its mounting. This gentler approach avoids the most common way this panel gets damaged during a valve repair. I've heard this valve sometimes needs replacing again after just a couple of years. Is that normal? Some owners have reported needing to replace this valve again within a relatively short time, even after a successful repair. While most installations hold up well long-term, if you experience a repeat failure, it's worth double-checking your household water pressure and mineral content, since hard water and high pressure can accelerate wear on any water valve regardless of brand. Is this the same as WH23X29538? The numbers look almost identical. No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close match, since ordering the wrong one means it won't fit correctly. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water valve originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WH23X29553 Washer Water Valve The XPARTCO WH23X29553 is an aftermarket replacement water inlet valve for GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café models. This valve controls the flow of water into the washer from the household supply line — when the control calls for a fill, the valve's solenoid opens to admit water, and closes again once the correct level is reached. Built with an ABS plastic body and stainless steel components for durability against corrosion. Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use. A failing valve typically shows up as the washer not filling properly, filling too slowly, or leaking water. It directly replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA. As an aftermarket replacement, the WH23X29553 is built to OEM-equivalent quality standards. Quick Answer The XPARTCO WH23X29553 Washer Water Valve fixes GE front-load washers (and select Hotpoint, RCA, Haier, Monogram, and Café models) that aren't filling properly, are filling too slowly, or are leaking water near the valve connections. Replaces AP6983554, PS12743643, EAP12743643, 33090202, 0024000126GA. Not the same part as the similarly-numbered WH23X29538 valve — confirm you have the correct number before ordering. Common Problems This Part Fixes Washer not filling with water, or filling only partially Washer fills much more slowly than it used to Water leaking near the valve connections Cycle stalling at the fill step and never advancing to wash No hot water reaching the tub, or no cold water reaching the tub Washer not washing properly due to insufficient or incorrect-temperature water Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer water inlet valve directly replaces the following OEM and cross-reference part numbers: WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water valve is compatible with select GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café washers built on the GE platform, including model numbers such as: GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN GFW650SSN0WW, GFW650SSN1WW, GFW650SSN2WW, GFW650SSN3WW, GFW650SSN4WW GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW GFW655SSV0WW PFW870SPV0RS PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS Note — not the same as WH23X29538: A similarly-numbered valve, WH23X29538, is a separate part (replaces 4977241, AP6990115, PS16217225, EAP16217225, 33090201, 0024000126GB) used on related but distinct models. The two are easy to confuse given how close the numbers are — always confirm you have the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement built to match GE's factory-specified solenoid design and flow rate ABS plastic body with stainless steel components for corrosion resistance Resolves "won't fill," "fills slowly," and "leaking near the valve" symptoms caused by valve failure Direct drop-in replacement — matches the original mounting and hose connections Replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPWH23X29553 Part Type Washer Water Inlet Valve OEM Part Number WH23X29553 Condition Aftermarket Replacement Brand GE Application Front-Load Washers Body Material ABS plastic Component Material Stainless steel Quantity 1 valve Compatible Brands GE, Hotpoint, RCA, Haier, Monogram, Café Installation Notes ⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Release The Control Panel Carefully Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. Access to this valve is typically behind the front control panel on many models. When removing the front control panel, avoid pulling it straight out too far — slotted tabs on the right side of the panel can break if forced. Instead, pull the panel gently forward, then slide it to the right to release it cleanly. With the panel released, locate the valve and disconnect the hot and cold water supply hoses, keeping a towel handy for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the outlet hoses from the old valve, remove its mounting screws, and pull it free. Install the new WH23X29553 in the same position, reconnect all outlet hoses to their original positions, reconnect the electrical connector, and secure the mounting screws. Reattach the hot and cold supply hoses, tightening securely. Reinstall the control panel and any surrounding trim, restore the water supply, and check every connection for leaks before restoring power. Run a full test cycle across a few different temperature settings to confirm each fill function works correctly. Tools needed: Phillips screwdriver, pliers, towel, work gloves. Frequently Asked Questions How do I remove the front control panel without breaking it? Avoid pulling the panel straight out with heavy force — the slotted tabs on the right side of the panel can snap if you pull too far. Instead, pull the panel gently forward first, then slide it to the right to release it from its mounting. This gentler approach avoids the most common way this panel gets damaged during a valve repair. I've heard this valve sometimes needs replacing again after just a couple of years. Is that normal? Some owners have reported needing to replace this valve again within a relatively short time, even after a successful repair. While most installations hold up well long-term, if you experience a repeat failure, it's worth double-checking your household water pressure and mineral content, since hard water and high pressure can accelerate wear on any water valve regardless of brand. Is this the same as WH23X29538? The numbers look almost identical. No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close match, since ordering the wrong one means it won't fit correctly. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the solenoid design, flow rate, and connection type of the original WH23X29553 valve used in compatible GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

AJU75152606 Genuine OEM LG Washer Water Inlet Valve Assembly The AJU75152606 is a genuine LG OEM water inlet valve assembly for LG top-load agitator washing machines. This assembly connects to the washer's hot and cold water supply and controls the flow of water into the tub during the fill portion of the wash and rinse cycles — electrical signals from the control system open and close the appropriate water passage, filling the tub to the correct level and shutting off once it's reached. This electric-powered valve assembly is finished in gray, designed for freestanding installation, and rated for an 8 lb capacity washer. Common causes of failure include mineral buildup or debris restricting flow through the valve, or general electrical wear in the solenoid coils. Symptoms of a failing valve include the washer not filling with water, hose leaks at the connections, the valve not opening fully, or reduced flow rate from internal buildup. Replacing this assembly requires removing the control panel and main top of the washer — a moderate difficulty repair. It directly replaces AP7005965. Quick Answer The AJU75152606 Genuine OEM LG Washer Water Inlet Valve Assembly fixes LG top-load agitator washers that won't fill with water, are leaking at the hose connections, or have reduced flow from internal buildup. Gray, electric-powered, 8 lb capacity rating. Replaces AP7005965. Not the same as the similarly-numbered AJU75152602 valve, which is used on different LG WT7000-series models — confirm your exact part number before ordering. Common Problems This Part Fixes Washer not filling with water Hose leaks at the valve connections Valve not opening fully, restricting water flow Reduced flow rate from mineral buildup or debris Overflow or filling problems from inconsistent water pressure Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers AJU75152606, ALG53799, AP7005965, EAP16547657, PD00074631, PS16547657 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve assembly is compatible with select LG top-load agitator washing machines, including model numbers such as WT7000CW, WT7005CW, WT6100CW, WT6105CM, WT6105CW, T14A4SEHTW, T1490SEHTW, T15A4SEHT2, T1590SEHTW, T15A4SEHTW, T14A4SEHTC, T1490SEHTC, and T14A4SEHBW. Note — not the same as AJU75152602: A similarly-numbered valve, AJU75152602, is a separate part used on other LG WT7000-series models (WT7100CW, WT7150CW, WT7300CV, WT7300CW, WT7400CW, WT7400CV, WT7405CV, WT7405CW, WT7800CW, WT7800CV, WT7900HBA, WT7155CW). The two numbers are easy to confuse given how close they are — always confirm the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure which valve your washer needs. Key Features Genuine LG OEM part — factory-specified solenoid design and flow rate Regulates hot and cold water flow into the tub during fill Resolves "won't fill," "hose leaks," "valve not opening fully," and "reduced flow" symptoms caused by valve failure Electric-powered, gray finish Designed for freestanding installation Rated for 8 lb capacity washers Direct drop-in replacement — matches the original mounting and hose connections Replaces AP7005965 Compatible with LG top-load agitator washing machines Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number AJU75152606 Part Type Washer Water Inlet Valve Assembly Condition Genuine OEM Brand LG Application Top-Load Agitator Washing Machines Color Gray Power Type Electric Installation Type Freestanding Capacity Rating 8 lb Repair Difficulty Moderate — requires control panel and main top removal Quantity 1 valve assembly Compatible Brand LG Installation Notes ⚠️ Unplug Washer And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Remove the washer's control panel and main top to access the inlet valve — this is a moderate difficulty repair due to the disassembly involved. Photograph the wiring and hose connections before disconnecting anything. Disconnect the water hoses and wiring connectors from the old valve. Unscrew and remove the old inlet valve assembly. Position the new AJU75152606 in the same location and secure it with screws. Reconnect the water hoses and wiring connectors fully. Reassemble the main top and control panel. Restore the water supply and power, then run a test cycle to confirm the washer fills correctly with no leaking at the hose connections. Tools needed: Phillips screwdriver, pliers, work gloves. Frequently Asked Questions My washer isn't filling with water. Is this the right part? Yes, this is the most direct symptom of a failed water inlet valve. Since this valve is what admits water from your household supply into the washer, a solenoid failure, mineral buildup, or debris can prevent water from entering properly, stopping the wash cycle from proceeding. Is this the same as AJU75152602? No, these are two separate LG valve part numbers used on different washer model series, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close number match. Is this a difficult repair? It's a moderate difficulty repair, since it requires removing the washer's control panel and main top to access the valve. Basic hand tools are sufficient, but budget more time than you would for a simpler part swap. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10253483 Washer Door Latch Assembly The XPARTCO W10253483 is an aftermarket replacement door latch assembly, made to replace Whirlpool part W10253483 (now WPW10253483), for select Whirlpool, Maytag, Kenmore, Amana and Inglis front-load washers. The door lock keeps the door from opening during the wash and spin cycles, and it keeps the washer from running unless the door is closed and locked. When it fails, the washer may not start, the door may not lock, or the cycle may stop partway through. This is an aftermarket replacement from XPARTCO, not a genuine Whirlpool part. It is sold individually. Check your model number before ordering. Quick Answer The XPARTCO W10253483 Door Latch Assembly replaces the door lock on a compatible front-load washer when it has failed. Replaces WPW10253483, 8540222 and 8540772. Classic symptoms: the washer won't start, the door won't lock or close, or the cycle stops mid-wash. Common Problems This Part Fixes Washer won't start Door won't lock or won't close Door locking problems during the wash or spin cycle Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door latch assembly is made to replace the following Whirlpool part numbers: WPW10253483, 1515091, 4619 702 3640, 8540222, 8540772, emz Part No: 38.0280, W10253483, AP6017910, AWP49969, EAP11751211, PD00003164, PS11751211 If your old latch shows a different number, contact our support team and we'll check whether it matches. Compatibility This door latch assembly is listed for Whirlpool, Maytag, Kenmore, Amana and Inglis front-load washers, including these examples: Whirlpool WFW9250WW00, WFW9250WL00, WFW8400TW02, WFW8200TW00 Maytag MHWZ400TQ00, MHWZ600TW00 Kenmore 11047542602, 11047532600, 11047512600, 11047081600 Note: The models above are a sample, not a full list. Whirlpool sells similar door latches under other part numbers, such as WP8183270, which may not fit every model. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Aftermarket replacement for the Whirlpool W10253483 door latch assembly Holds the door locked during the wash and spin cycles Cross-references WPW10253483, 8540222 and 8540772 Sold individually Product Specifications Part Number W10253483 OEM Part Number WPW10253483 Part Type Washer Door Latch Assembly Condition Aftermarket Replacement Quantity 1 Assembly Application Select Front-Load Washers Installation Notes ⚠️ Disconnect Power Before Installing Unplug the washer before you begin. Remove the parts needed to reach the latch for your model, which on some washers includes the door boot or flex gasket. Disconnect the electrical plugs, remove the screws holding the old latch, and pull it out. Install the new latch, reconnect the plugs, and reassemble in reverse order. Restore power and run a test cycle to confirm the door locks. If the door is locked shut, unplug the washer, remove the bottom front service panel and pull the release tab on the bottom of the door lock to open it. Frequently Asked Questions My washer won't start or the door won't lock. Is this the part I need? It can be. Check that the door closes fully and that the door strike is not damaged first. Other parts, such as the control board or wiring, can cause similar symptoms, so confirm the latch is the problem before replacing it. Is this an OEM or aftermarket part? This is an aftermarket replacement from XPARTCO, made to replace Whirlpool part W10253483. If you specifically need a genuine Whirlpool part, contact our support team. Does this replace WPW10253483? Yes. W10253483 is now listed under the number WPW10253483, and this latch is made to replace both, as well as 8540222 and 8540772. Substitute parts can look different from the original. Will this fit my washer? It is listed for many Whirlpool-built front-load models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

W11168740 Washer Genuine OEM Cold Water Inlet Valve The W11168740 is a genuine Whirlpool OEM cold water inlet valve for Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, Amana, and related models. Located at the rear of the washer, this valve connects to the cold water supply and solenoid wiring, opening to admit cold water into the tub as the cycle calls for it and closing once the correct fill level is reached. Blue in color, with two solenoids, a standard hose fitting inlet, and a single water outlet. Common causes of failure include a worn internal seal that no longer closes fully, or general electrical wear in the solenoid. Symptoms of a failing valve include the washer not getting any cold water, filling slowly, not filling at all, or continuing to fill or leak water even after the washer has been unplugged. It directly replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073. Quick Answer The W11168740 Washer Genuine OEM Cold Water Inlet Valve fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Amana top-load washers that aren't getting cold water, are filling slowly, aren't filling at all, or keep leaking or filling even when unplugged. Blue, two solenoids. Replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073. If water keeps running even after the washer is unplugged, try shutting off the cold water supply valve — if that stops it, the cold water inlet valve isn't closing properly and needs replacing. Common Problems This Part Fixes Washer not getting any cold water Washer filling slowly Washer not filling at all Water continuing to fill or leak even after the washer is unplugged Cycle stalling at the fill step and never advancing to wash Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers: W11168740, WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This cold water inlet valve is compatible with select Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, and Amana washers built on the Whirlpool platform. Note: This is the cold water valve only — a separate hot water valve is used alongside it on the same washer. If your washer isn't getting hot water rather than cold, you likely need the companion hot water valve instead. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which valve your washer needs. Key Features Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate Regulates cold water flow into the washer tub during fill Resolves "no cold water," "fills slowly," "won't fill," and "leaks or fills when unplugged" symptoms Blue color with two solenoids Standard hose fitting inlet, single water outlet Direct drop-in replacement — matches the original mounting and hose connections Replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073 Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Amana top-load washers Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair, typically 20 to 30 minutes Product Specifications Part Number W11168740 Part Type Washer Cold Water Inlet Valve Condition Genuine OEM Brand Whirlpool Location Rear of the appliance Color Blue Solenoids 2 Inlet Standard hose fitting Outlet 1 Repair Difficulty Easy — 20 to 30 minutes Quantity 1 valve (sold individually) Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana Installation Notes ⚠️ Unplug Washer And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access is at the rear of the washer, where both the cold and hot water inlet valves are typically mounted together, each secured with just a few screws. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical clamps and the water hose from the old cold water valve, remove the mounting screws, and pull it free. Install the new W11168740 in the same position, reconnect the water hose and electrical clamps fully, and secure the mounting screws. While you're in this area, consider replacing the fill hose at the same time if it shows signs of wear, since it's easy to access during this same repair. Restore the water supply and power, then run a full test cycle to confirm correct fill behavior with no leaking. Tools needed: Phillips screwdriver, pliers, work gloves. Frequently Asked Questions Water keeps running even after I unplug my washer. Is this the valve I need? Yes, this is a documented symptom of a cold water inlet valve that's no longer closing properly. One customer had exactly this experience — after unplugging the washer, water continued to run, and shutting off the cold water supply valve at the wall stopped it. That confirmed the cold water inlet valve itself wasn't sealing shut, even with no power to the washer, and replacing it resolved the issue. Should I replace the hot water valve at the same time? It's worth considering, especially if both valves are the same age. Several customers have replaced both the hot and cold valves together in a single repair, since they're mounted in the same area and access is already open — one customer described it as "very quick & easy" to do both at once. Is this a difficult repair? No, this is a straightforward repair. Multiple customers describe it as easy, typically secured with just a few screws and simple electrical clamp connections — one review specifically noted the whole job took about 20 minutes. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the cold water inlet valve originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less