2187145 Refrigerator Genuine Compressor Overload
Replaces Part Numbers: WP2187145, OEM24024106, AP6006026, 2187145, 2-34286-038, 4431117, 8206664, PS11739089, W10306725.
Description: This Compressor Overload is a Genuine OEM part for specific Whirlpool, Kenmore refrigerator models.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Genuine OEM AEQ72910411 Refrigerator Ice Maker Assembly
The Genuine OEM LG AEQ72910411 is a complete ice maker assembly kit for LG refrigerators. The ice maker takes in water, freezes it into ice cubes, and releases them into the ice storage bin. The kit includes the complete ice maker and housing, so it replaces the whole unit rather than a single component. If your refrigerator has stopped making ice and the water supply and freezer temperature check out, a faulty ice maker assembly may be the cause.
This is the original LG part, not an aftermarket equivalent. Because LG uses different ice makers across its refrigerator lines, check the part number against your model before ordering.
Quick Answer
The Genuine OEM AEQ72910411 Ice Maker Assembly replaces a failed ice maker in a compatible LG refrigerator that has stopped producing ice. Kit includes the complete ice maker and housing. Classic symptom: the refrigerator is cold and the water supply is on, but the ice bin stays empty.
Common Problems This Part Fixes
Refrigerator has stopped making ice
Ice maker not filling or freezing a new batch
Ice maker not releasing ice into the bin
Damaged or worn ice maker housing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice maker assembly is listed under the following part number:
AEQ72910411, 2629334, ALG53099, AP5675948, EAP7788168, OEM17027853, PD00029871, PS7788168
We have not found any superseded or alternate manufacturer numbers for this assembly. If your old ice maker or parts diagram shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This ice maker assembly is listed for LG refrigerators, including these examples:
LG LFX25974SB, LFX25974ST, LFX25974SW
LG LFX28968SB, LFX28968ST, LFX28968SW
Revision suffixes such as LFX25974ST/01 and LFX28968ST/00
Note: Retailers list these two model families, each with several revision suffixes. This is not a full list of every LG refrigerator that uses this ice maker. Check your full model number, including the suffix, against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM LG ice maker assembly, not an aftermarket equivalent
Kit includes the complete ice maker and housing
Replaces a faulty ice maker when the refrigerator has stopped producing ice
Listed for LG LFX25974 and LFX28968 series refrigerators
Product Specifications
Part Number
AEQ72910411
OEM Part Number
AEQ72910411
Part Type
Refrigerator Ice Maker Assembly Kit
Condition
Genuine OEM
Manufacturer
LG
Kit Includes
Complete Ice Maker and Housing
Application
LG Refrigerators
Installation Notes
⚠️ Unplug Power And Shut Off Water Before Installing Unplug the refrigerator and turn off its water supply before beginning, and wear work gloves. Empty the ice bin and follow your model's service guide to reach and remove the ice maker. Note how the wiring is connected before disconnecting it, remove the old ice maker, and fit the new one in the same position. Reconnect the wiring, restore water and power, and allow time for the new ice maker to produce and release its first batches of ice.
Frequently Asked Questions
My refrigerator stopped making ice. Is this the part I need?
A failed ice maker is one possible cause. Before replacing it, check that the water supply is on and the water line isn't frozen, and that the freezer is cold enough. If those are fine and the ice maker still doesn't make or release ice, replacing the assembly is the next step.
What is included in the kit?
Retailers describe it as the complete ice maker and housing. They do not itemize individual components, so contact our support team if you need to confirm exactly what is in the box.
Is this an OEM or aftermarket part?
This is a genuine OEM part from LG, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for LG LFX25974 and LFX28968 series refrigerators. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WPW10238100 Refrigerator Water Valve
The WPW10238100 is a genuine OEM single primary water inlet valve from Whirlpool for Whirlpool-built refrigerators sold under the Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Inglis, and Ikea names. The valve is an electrically operated solenoid that opens to let water from the household supply line into the refrigerator's water system, and closes to stop it. When the valve fails, the refrigerator can stop supplying water to the dispenser and ice maker, make little or no ice, leak, or, if it no longer shuts off, overfill the ice maker and build up ice and frost.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and operation match the original. It is a simple repair for most owners, typically 15–30 minutes. Some refrigerators also use a separate dual-solenoid valve, so check the Compatibility note before ordering.
Quick Answer
The Genuine OEM WPW10238100 Water Valve fixes a Whirlpool-built refrigerator with no water at the dispenser, little or no ice, an overflowing ice maker, or a leak caused by a failed water inlet valve. Single primary water inlet valve, genuine OEM from Whirlpool. Classic symptom: the dispenser gives little or no water and the ice maker isn't making ice, even though the water supply is on.
Common Problems This Part Fixes
Water dispenser not working, or giving only a trickle
Ice maker not making ice
Ice maker overflowing, with ice or frost buildup
Water leaking from the refrigerator
Valve making noise or not shutting off properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water valve replaces the following part numbers:
WPW10238100, W10238100, W10498992, IMV-8100, K-78199, AP6017532, AWP50143, EAP11750831, PD00002616, PS11750831
These are Whirlpool's un-prefixed and earlier numbers for this valve. If your old valve or parts diagram shows any of them, match against this list.
Compatibility
This valve is listed for refrigerators from the Whirlpool family of brands:
Whirlpool, KitchenAid, Maytag, Jenn-Air, Inglis, and Ikea
Kenmore, including models such as 10641162310, 10651132210, and 10651149110
Other models include ISC21CNEDS00, KRSC503ESS00, KSC24C8EYY02, and WRF560SEHZ00
Note: This is a single primary water inlet valve. Some refrigerators use a separate dual-solenoid valve for the ice maker and dispenser, which is a different part. The model list above is only a sample, so confirm fit by matching the number on your old valve or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM Whirlpool single primary water inlet valve, not an aftermarket equivalent
Replaces W10238100 and W10498992
Restores water to the dispenser and ice maker, and proper shut-off
Fits select Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Inglis, and Ikea refrigerators
Simple replacement, typically 15–30 minutes
Product Specifications
Part Number
WPW10238100
OEM Part Number
WPW10238100
Part Type
Refrigerator Single Primary Water Inlet Valve
Condition
Genuine OEM
Manufacturer
Whirlpool
Application
Select Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Inglis & Ikea Refrigerators
Installation Notes
⚠️ Shut Off Water and Unplug Power Turn off the water supply to the refrigerator and unplug it before starting. Following your model's service guide, pull the refrigerator out and remove the rear access panel to reach the valve. Disconnect the water lines from the old valve, and the wiring connector from its solenoid, then remove the mounting screws. Install the new valve in the same position, reconnect the wiring and water lines securely, and replace the panel. Restore water and power, check every connection for leaks, and run water through the dispenser for a few minutes to flush the line. The valve needs at least 20 psi of water pressure to shut off properly, so if the ice maker still overflows, check the supply pressure.
Frequently Asked Questions
My dispenser has no water and the ice maker isn't working. Is this the part I need?
It can be. Before replacing the valve, check that the water supply is on, the supply line isn't kinked, and the water filter isn't clogged. If those are fine, a failed water inlet valve is a likely cause.
My ice maker is overflowing. Could it be the valve?
Yes. A valve that doesn't shut off fully will keep letting water in. Also confirm your water pressure is at least 20 psi, since low pressure can stop the valve from closing properly.
My refrigerator has a dual-solenoid valve. Will this work?
No. This is a single primary valve, and the dual-solenoid valve is a different part. Check your parts diagram or contact our support team with your model number.
Is this an OEM part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent, so it matches the original factory fit and specification.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
W10500004 Genuine OEM Whirlpool Refrigerator Bottom Door Hinge & Cam Kit (Right, Gray)
The W10500004 is a genuine Whirlpool OEM bottom door hinge and closing cam kit for the right side fresh food door on Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators. This kit combines two related components: the bottom hinge, which supports the door's weight and lets it swing open and closed, and the closing cam, a plastic component that gives the door its final "pull" to close firmly on its own once you've pushed it most of the way shut.
Finished in Apollo Gray, this kit measures approximately 4.65" x 4.49" x 2.24" and weighs about 0.34 lbs. The plastic closing cam is the part most prone to wear — after years of use it can flatten out or crack, losing the contoured shape that pulls the door the rest of the way closed. A worn cam or hinge typically shows up as a door that won't close fully on its own unless you push it firmly shut, or a door that feels loose, sags, or doesn't swing smoothly on its hinge. It directly replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, and W10257209.
Quick Answer
The W10500004 Genuine OEM Whirlpool Refrigerator Bottom Door Hinge & Cam Kit (Right, Gray) fixes Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators where the right-side fresh food door won't close on its own unless pushed firmly shut, or the door feels loose or sags on its hinge. Apollo Gray finish. Replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, W10257209. Mounting the closing cam requires a new screw, sold separately — the kit does not include it.
Common Problems This Part Fixes
Refrigerator door won't close fully on its own — has to be pushed firmly shut
Door that feels loose, sags, or doesn't swing smoothly on its hinge
Worn or flattened closing cam that no longer pulls the door shut
Visible cracks or wear on the plastic closing cam
Door that doesn't seal properly due to incomplete closing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator bottom door hinge and cam kit directly replaces the following OEM and cross-reference part numbers:
2684526, W10249949, W10257197, W10257209, AP5656407, AWP40907, EAP5573850, PD00024325, PS5573850
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This bottom door hinge and cam kit is compatible with select Whirlpool refrigerators, and also fits select Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators built on the Whirlpool platform, as well as select Kenmore Elite and Ikea refrigerators, including model numbers such as 3WSC19D4AY00, 3WSC19D4XW00, 3WSC19D4XD00, 3WSC19D4XB00, 3WSC20N4XB00, and 3WSC20N4XW00.
Note — right side only: This kit is specific to the right-side fresh food door. A separate kit exists for the left side. This is also the lower door's hinge and cam kit — the upper door's closing cam is a different part sold separately. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which hinge kit your refrigerator needs.
Key Features
Genuine Whirlpool OEM part — factory-specified hinge and cam design
Combined kit — bottom hinge plus closing cam in one part
Resolves "door won't close on its own," "door feels loose," and "worn or cracked cam" symptoms
Apollo Gray finish
Approximately 4.65" x 4.49" x 2.24", 0.34 lbs
Direct drop-in replacement for the right-side lower door hinge and cam
Replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, and W10257209
Compatible with Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W10500004
Part Type
Bottom Door Hinge & Closing Cam Kit
Condition
Genuine OEM
Brand
Whirlpool
Door Position
Right side, fresh food door, lower hinge
Color
Apollo Gray
Dimensions
4.65" x 4.49" x 2.24"
Weight
0.34 lbs
Additional Hardware Needed
New cam mounting screw (sold separately)
Repair Difficulty
Moderate — door removal required
Quantity
1 hinge and cam kit
Compatible Brands
Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, Admiral, Kenmore Elite, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting — A New Cam Mounting Screw Is Required, Sold Separately Disconnect power at the outlet before beginning. Wear work gloves. Remove the top hinge cover, then remove the top hinge support to free the top of the door. Lift the door up and off the bottom hinge support to remove it completely — this is easier with a second person supporting the door's weight. Remove the old, worn closing cam and hinge from the bottom support. The manufacturer specifies that mounting the new closing cam requires a new screw, which is not included in this kit and must be ordered separately. Install the new W10500004 hinge and cam onto the bottom support, applying a small amount of lubricant such as petroleum jelly to the cam surface to help it move smoothly against the door once reassembled. Set the door back onto the bottom hinge support, making sure it seats correctly on the new cam. Reinstall the top hinge support and top hinge cover. Restore power and test the door by opening it partway and letting go — it should swing the rest of the way closed on its own if the cam is seated and lubricated correctly. Tools needed: 5/16" nut driver or socket, ratchet, small flat-blade screwdriver, work gloves.
Frequently Asked Questions
My door won't close all the way unless I push it. Is this the right part?
Yes, this is the classic symptom of a worn closing cam. When the cam is new, its contoured shape gives the door that final "pull" to swing closed on its own once you've pushed it most of the way shut. As the cam wears flat or cracks over years of use, it loses that pulling action, leaving the door to stay open unless you close it firmly by hand.
Do I need to buy anything else along with this kit?
Yes — per Whirlpool's own specifications, mounting the new closing cam requires a new mounting screw, which is sold separately and not included in this kit. Order that screw at the same time to avoid a delay partway through the repair.
Should I lubricate anything during installation?
Yes, it's recommended. Applying a small amount of lubricant, such as petroleum jelly, to the cam surface helps it move smoothly against the door once everything is reassembled, and can extend the life of the new cam by reducing friction wear.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original hinge design, cam shape, and Apollo Gray finish of the bottom door hinge and cam kit originally installed on your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR50X10068 Refrigerator Defrost Thermostat – Replacement for GE, Hotpoint, and Kenmore
Product Overview
This Defrost Thermostat is a replacement part designed for use in select GE refrigerator models. This component acts as a safety device in the refrigerator's defrost system, preventing the freezer from overheating during the defrost cycle. It works by monitoring the temperature of the evaporator coil and turning off the defrost heater when the coil gets warm enough, thus safeguarding the freezer from getting too hot.
Defrost thermostat for refrigerator or freezer
L140-30F.
6" long wire, wire connectors not included.
Replaces Part Numbers
This thermostat replaces WR50X10068, WR50X10015, WR50X10017, WR50X10018, WR50X10028, WR50X10051, WR50X10052, WR50X10053, WR50X10054, WR50X10074, WR50X10075, WR50X10079, L140-30F, AH1017716, EA1017716, AP3884317, PS1017716.
It is designed to match OEM performance and fit in a wide range of GE and GE-built refrigerator models.
Compatible Brands
Compatible with refrigerators from GE, Hotpoint, and Kenmore models manufactured by GE. Suitable for top-freezer and side-by-side configurations that use a defrost thermostat with this part number.
Fixes the Following Issues
Frost or ice buildup in freezer
Refrigerator not defrosting
Poor airflow and cooling performance
Defrost cycle not activating
Why Buy from Express Parts Direct
Cost-effective aftermarket alternative
Fast and free shipping across the U.S.
Trusted by appliance technicians and DIY users
Easy to install and reliable in performance
XPARTCO 242278801 Refrigerator Temperature Sensor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators
Product Description
Keep your refrigerator cooling accurately with the XPARTCO 242278801 Refrigerator Temperature Sensor. This high-quality replacement monitors the temperature inside the fresh-food and freezer compartments, sending signals to the control board to regulate cooling. A faulty sensor can cause temperature fluctuations, over-freezing, or warm spots. Replacing it with this reliable XPARTCO part ensures consistent temperature control and energy-efficient performance.
Replaces Part Numbers
242278801 PD00029820, EAP8760187, AP5802148, 3016441, PS8760187.
Compatibility
This replacement temperature sensor fits select Frigidaire, Electrolux, and Kenmore refrigerators.
Example compatible models include (but are not limited to): Frigidaire FFHS2611LBNA, Electrolux E23BC78IPS3, and Kenmore 253.7041341C.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM temperature accuracy and response rate
❄️ Accurate Cooling Control – Monitors refrigerator temperature for consistent performance
💰 Cost-Effective Fix – Reliable alternative to expensive OEM parts
🛠️ Simple Installation – Plug-in design for fast, easy replacement
🛡️ Fixes Common Issues – Solves warm refrigerator, freezing, or inconsistent cooling problems
📐 Product Specification
Part Number: 242278801
Component Type: Refrigerator Temperature Sensor (Thermistor)
Material: Plastic housing with thermistor probe and wiring harness
Resistance Range: Approximately 2.7 kΩ at 77°F (varies by temperature)
Mounting: Direct-fit installation in refrigerator liner or evaporator area
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, wire clip removal tool
⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock.
Steps:
Disconnect power and remove interior shelves for access.
Locate the old temperature sensor, usually near the evaporator or rear wall.
Disconnect the sensor’s wiring harness and remove clips.
Install the new XPARTCO 242278801 sensor in the same position.
Reconnect wiring, reassemble interior parts, and restore power.
Allow several hours for the refrigerator to stabilize temperature.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your refrigerator cooling efficiently — Add to Cart Now for a reliable, budget-friendly repair!
WR49X25197 Refrigerator Genuine OEM Axial Evaporator Motor Replaces WR60X26866
The WR49X25197 is a genuine GE OEM axial evaporator fan motor for the fresh food evaporator on select GE French door refrigerators. Unlike a standard evaporator fan motor, this is an axial-design motor purpose-built for the fresh food side of the refrigeration system, using its blade geometry to move air efficiently and quietly through that compartment's evaporator coil for precise, consistent temperature control.
Rated 13.6VDC, 0.16A. Manufactured by Nidec, designation V80E14MS2A3-57A611. Over time, motor bearings wear out or the motor can fail electrically, and symptoms typically include the fresh food compartment running warm while the freezer remains unaffected, unusual noise from the fresh food evaporator area, or inconsistent cooling in that compartment specifically, since this motor doesn't serve the freezer side at all. It directly replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, and AP6278228.
Quick Answer
The WR49X25197 Genuine OEM GE Axial Evaporator Motor fixes GE French door refrigerators where the fresh food compartment specifically runs warm, there's unusual noise from the fresh food evaporator area, or fresh food cooling is inconsistent while the freezer works fine. 13.6VDC, 0.16A axial motor. Replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, AP6278228. If your refrigerator was manufactured between May 2014 and March 2015 (serial range HD–FF), the control software must also be updated by factory service or a Software Update Module (WR98R882802) for this motor to perform correctly.
Common Problems This Part Fixes
Fresh food compartment running warm while the freezer stays normal
Unusual noise coming from the fresh food evaporator area
Inconsistent or fluctuating temperature in the fresh food section specifically
Fresh food evaporator fan not spinning or spinning intermittently
Reduced airflow affecting fresh food cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator axial evaporator motor directly replaces the following OEM and cross-reference part numbers:
WR49X25197, WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This axial evaporator motor is compatible with select GE French door refrigerators.
Note — fresh food evaporator only, and a software caveat for certain units: This motor serves the fresh food evaporator specifically — a different application from a general freezer evaporator fan motor. Additionally, if your refrigerator was manufactured between May 2014 and March 2015 (serial range HD through FF), the refrigerator's control software must be updated by factory service, or with a Software Update Module (WR98R882802), for this motor to perform correctly after installation. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified axial blade design for the fresh food evaporator
Resolves "fresh food running warm," "unusual noise from the fresh food evaporator," and "inconsistent fresh food cooling" symptoms
Rated 13.6VDC, 0.16A
Manufactured by Nidec, designation V80E14MS2A3-57A611
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, and AP6278228
Compatible with GE French door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WR49X25197
OEM Part Number
WR60X26866
Part Type
Axial Evaporator Fan Motor (Fresh Food)
Condition
Genuine OEM
Brand
GE
Application
French Door Refrigerators — Fresh Food Evaporator
Voltage
13.6VDC
Amperage
0.16A
Motor Manufacturer
Nidec (V80E14MS2A3-57A611)
Motor Type
Axial
Software Update Caveat
Required for units mfg. May 2014–March 2015, serial range HD–FF (WR98R882802)
Quantity
1 evaporator motor
Compatible Brand
GE
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check Your Manufacture Date For A Software Update Requirement Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before starting, check your refrigerator's serial number/manufacture date sticker (typically inside the fresh food compartment) — if your unit was made between May 2014 and March 2015 with a serial range of HD through FF, plan for a control software update via factory service or a Software Update Module (WR98R882802) after installing this motor, since without it the new motor may not perform correctly. Access to the fresh food evaporator is typically through an interior panel in the fresh food compartment, separate from the freezer's evaporator access — check your model's service diagram. If there's frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Mount the new WR49X25197 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the panel. Restore power and monitor the fresh food compartment over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My fresh food section runs warm but the freezer is fine. Is this the right part?
Yes, this is exactly the symptom pattern this motor addresses, since it's dedicated specifically to the fresh food evaporator rather than serving both compartments. If your freezer is cooling normally and only the fresh food section is warm or inconsistent, this axial motor is a strong candidate for the cause.
Do I really need a software update after installing this motor?
Only if your refrigerator falls into a specific manufacturing window: units made between May 2014 and March 2015, identifiable by a serial range of HD through FF. For those units, GE's own guidance states the control software must be updated by factory service or with a Software Update Module (WR98R882802) for the new motor to perform correctly. If your refrigerator falls outside that date range, this step isn't necessary — check your serial number sticker to confirm which category your unit falls into.
Is this the same as a regular evaporator fan motor?
Not quite — this is an axial-design motor built specifically for the fresh food evaporator on GE French door refrigerators, distinct from general evaporator fan motors that serve the freezer side or both compartments together. Always confirm your model number and which compartment's fan has failed before ordering.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original axial motor design, blade fitment, and electrical rating of the fresh food evaporator motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR30X39470 Refrigerator Genuine Ice Maker
Fits specific GE refrigerator models.
Replaces Part Numbers: WR30X39470, AP7192967, OEM28771870, PS16729732.
Description: This Refrigerator Ice Maker Assembly is essential for restoring your refrigerator's ice production capabilities. This Genuine OEM part ensures seamless compatibility with a wide range of GE refrigerator models, providing reliable and consistent ice making. Crafted with high-quality materials, the Ice Maker Assembly delivers efficient performance, helping you maintain a steady supply of ice for your daily needs. Its sturdy design ensures long-lasting durability, reducing the need for frequent replacements. Installing this part is straightforward, allowing you to quickly get your refrigerator back to full functionality without hassle. Whether your original ice maker is malfunctioning, leaking, or has worn out over time, the Refrigerator Ice Maker Assembly offers a perfect replacement solution.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Genuine OEM W11844302 Refrigerator Filter Head
The W11844302 is a genuine OEM water filter head assembly for Whirlpool refrigerators, and the current part number that supersedes the earlier W11808483. The filter head is the fitting inside the refrigerator that holds the water filter and routes incoming water through it to the water dispenser and ice maker. When the head cracks, leaks, or no longer seats the filter correctly, you can see water at the filter, lose flow to the dispenser or ice maker, or find the filter will not lock in or seal.
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent, so the fit and the filter connection match what came with the refrigerator. It is the filter head only. The water filter itself is a separate part and is sold separately.
Quick Answer
The Genuine OEM W11844302 Filter Head fixes a Whirlpool refrigerator whose filter head is cracked, leaking, or no longer holding or sealing the water filter. Genuine OEM, the current number superseding W11808483 and a long list of earlier Whirlpool filter head numbers. Classic symptom: water dripping around the filter, a filter that won't lock in or seal, or reduced water flow to the dispenser and ice maker.
Common Problems This Part Fixes
Water leaking from or around the filter head
Water filter won't lock in or seal properly
Reduced or no water from the dispenser or ice maker traced to the filter head
Cracked, broken, or damaged filter head housing
Worn filter connection that no longer holds the filter securely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This filter head replaces the following part numbers:
W11844302, W11346623, W11808483, 12590620, 12590621, 12590622, W10605367, W10861009, WPW10605367, 12590618, W10609243, W11308018, W11791385, AP8114280, AWP1598415.
W11844302 is the newest number for this filter head, superseding W11808483. The rest are earlier Whirlpool numbers for it. The source list continues beyond those shown, so additional numbers may exist. If your old filter head or parts diagram shows any of them, match against this list.
Compatibility
This filter head is listed for:
Whirlpool refrigerators, including WRF535SWHZ
Note: Filter heads differ between refrigerator models and generations, and no full model list is published for this part. Before ordering, compare your old filter head and its mounting against the Replaces list and your parts diagram, or contact our support team with your model number and we'll verify fit. This is the filter head only. The water filter is sold separately.
Key Features
Genuine OEM Whirlpool water filter head assembly, not an aftermarket equivalent
Current part number, superseding W11808483 and a long list of earlier Whirlpool filter head numbers
Restores a secure, leak-free filter connection
Filter head only. Water filter sold separately
Product Specifications
Part Number
W11844302
OEM Part Number
W11844302
Supersedes
W11808483
Part Type
Refrigerator Water Filter Head Assembly
Condition
Genuine OEM
Manufacturer
Whirlpool
Included
Filter Head Only
Application
Select Whirlpool Refrigerators
Installation Notes
⚠️ Shut Off Water and Unplug Power Turn off the water supply to the refrigerator and unplug it before starting. Remove the water filter, and have towels ready since some water will remain in the lines. Following your model's service guide, disconnect the water lines from the filter head and remove the screws or fasteners holding it to the refrigerator. Note how the lines and mounting are arranged, install the new filter head in the same position, and reconnect the lines securely. Install the water filter, restore water and power, and check every connection for leaks. Run water through the dispenser for several minutes to flush air from the lines, and check again for leaks.
Frequently Asked Questions
My water filter leaks or won't seal. Is this the part I need?
It can be. Check first that the filter is the correct one for your model and is fully seated. If the filter fits correctly but still leaks, or the head itself is cracked or damaged, replacing the filter head should fix it.
Does this include the water filter?
No. This is the filter head only. The water filter is sold separately.
My old filter head is marked W11808483, W10861009, or W11346623. Will this work?
All three numbers are on the Replaces list. Because filter heads vary between models, compare your old head and its mounting against this one, or contact our support team with your model number and we'll confirm before you order.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA32-00006S Refrigerator Temperature Sensor – Compatible with Samsung Refrigerators
Product Description
Restore accurate temperature monitoring and consistent cooling with the XPARTCO DA32-00006S Refrigerator Temperature Sensor. This high-quality aftermarket replacement (also known as a thermistor) measures internal refrigerator or freezer temperatures and sends precise feedback to the control board. A failed or inaccurate sensor can cause temperature fluctuations, over-freezing, warm compartments, or error codes. Replacing it with this reliable XPARTCO sensor helps maintain stable temperatures and proper refrigerator operation. fits select Samsung Refrigerator models
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and performance.
Replaces Part Numbers
DA32-00006S, PD00002153, EAP4138590, AP4308802, PS4138590.
Compatibility
This replacement refrigerator temperature sensor fits select Samsung refrigerators.
Commonly used in fresh food or freezer compartments depending on model.
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM resistance and response specifications
🌡️ Accurate Temperature Sensing – Helps maintain consistent cooling
❄️ Fixes Cooling Issues – Resolves temperature swings and sensor-related errors
🧩 Direct-Fit Design – Installs easily without modification
💰 Cost-Effective Repair – Reliable alternative to OEM temperature sensors
📐 Product Specification
Part Number: DA32-00006S
Component Type: Refrigerator Temperature Sensor (Thermistor)
Function: Measures and reports internal temperature
Application: Refrigerator or freezer compartment (model dependent)
Connector Type: Plug-in wire harness
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the refrigerator before servicing to avoid electrical shock.
Basic Steps:
Disconnect refrigerator power.
Access the sensor location inside the compartment or behind the panel.
Disconnect the old temperature sensor from the wiring harness.
Remove the old sensor and install the new XPARTCO DA32-00006S sensor.
Reconnect wiring, reassemble panels, and restore power.
Allow several hours for temperatures to stabilize.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate temperature control and reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!
WR57X30890 Refrigerator Genuine Water Valve
Water inlet valve assembly with Wire Harness
Replaces Part Numbers: WR57X30890, WR57X26569, WR57X30891, AP6891693, PS12727426.
Description: This water inlet valve is a Genuine OEM part for select GE Refrigerator models, responsible for controlling the flow of water into the refrigerator's ice maker and water dispenser. It is typically located at the back of the appliance, near the water supply line. The water inlet valve features quick-connect fittings for easy installation and ensures a reliable and steady supply of water for ice production and dispensing.
XPARTCO DA32-10104N Refrigerator Temperature Sensor
The XPARTCO DA32-10104N is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. This sensor is mounted on or near the evaporator coil and continuously monitors the internal temperature of the refrigerator compartment, transmitting real-time readings to the electronic control board.
Based on the data received from the sensor, the control board regulates the compressor, evaporator fan motor, and defrost system to maintain the set temperature. When this sensor fails or drifts out of calibration, the control board receives inaccurate temperature readings — leading to a refrigerator that runs too cold, too warm, or triggers a 5E/SE error code. Features a 9-inch cord for easy installation and a sensitive thermal element with temperature detection accuracy of ±0.1°C.
Quick Answer
The XPARTCO DA32-10104N Refrigerator Temperature Sensor fixes refrigerators that are too warm, too cold, display a 5E/SE error code, or have inconsistent temperatures that spoil food. It monitors internal refrigerator temperature and sends data to the control board to regulate cooling. Compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators.
Common Problems This Part Fixes
Refrigerator running too warm — food spoiling faster than normal
Refrigerator running too cold — food or drinks freezing in the fresh food section
5E or SE error code displayed on the control panel
Inconsistent or fluctuating temperatures inside the refrigerator
Compressor running continuously without reaching set temperature
Excessive frost or ice buildup on evaporator coils
Replaces Part Numbers
This sensor directly replaces the following OEM and cross-reference part numbers:
DA32-10104N, DA32-10104V, 2030330, ASM1216617, PD00026468, EAP4138666, AP4979323, PS4138666.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select refrigerators from the following brands:
Samsung French door refrigerators
Samsung side-by-side refrigerators
Samsung bottom freezer refrigerators
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Monitors internal refrigerator temperature and sends real-time data to the electronic control board
Fixes 5E/SE error codes caused by a faulty or out-of-calibration temperature sensor
Temperature detection accuracy of ±0.1°C for precise cooling control
9-inch cord length for easy installation and connection to the control board
Aftermarket replacement built to OEM-equivalent quality standards
Direct drop-in replacement — no modification required
DIY-friendly repair — installs with basic hand tools in 30–45 minutes
Product Specifications
Part Number
DA32-10104N
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Aftermarket Replacement
Application
Refrigerator Temperature Control System
Cord Length
9 inches
Detection Accuracy
±0.1°C
Resistance at 70°F
~9.3K ohms
Resistance at 90°F
~7.7K ohms
Resistance at 100°F
~6.2K ohms
Resistance at 120°F
~4.3K ohms
Compatible Brands
Samsung
Installation Notes
⚠️ Safety First — Unplug Refrigerator Before Starting Unplug the refrigerator from the power source before beginning any repair. Safely remove and store any food that could deteriorate while the power is off. Wear work gloves to protect your hands. The DA32-10104N sensor is located near the evaporator coil, typically behind the rear panel inside the refrigerator or freezer compartment. Remove the panel, locate the sensor along the yellow wire, disconnect the old sensor from its plug, and connect the new sensor in the same position. Reassemble the panel and restore power. Allow 24 hours for the refrigerator to return to normal operating temperature. Tip: Before replacing, test the old sensor with a multimeter — resistance readings outside the values in the specs table above confirm a faulty sensor. Consult your refrigerator's service manual for model-specific instructions.
Frequently Asked Questions
Will the DA32-10104N fit my Samsung refrigerator?
This sensor is compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. Use the model search above to verify your model, or contact our support team before ordering.
What does the temperature sensor do?
The temperature sensor (thermistor) continuously monitors the internal temperature of the refrigerator and sends readings to the electronic control board. The control board uses this data to regulate the compressor, fans, and defrost system to maintain the set temperature. When the sensor fails or drifts out of range, the control board receives inaccurate data and cannot maintain proper cooling.
What are signs that my temperature sensor needs replacement?
Common signs include: the refrigerator running too warm or too cold, food spoiling faster than normal, a 5E or SE error code on the display, inconsistent temperatures, or the compressor running continuously without reaching the set temperature.
How do I test the DA32-10104N sensor before replacing it?
Use a multimeter to measure the resistance across the sensor terminals. At 70°F the reading should be approximately 9.3K ohms, at 90°F approximately 7.7K ohms, at 100°F approximately 6.2K ohms, and at 120°F approximately 4.3K ohms. Readings significantly outside these values indicate a faulty sensor that needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is designed to deliver reliable, accurate temperature sensing at a more affordable price point.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
