Search results for "refrigerator damper"

W10515058 Refrigerator LED Light & Cover Replaces WPW10515058 The XPARTCO W10515058 is an aftermarket replacement LED light and flat lens cover assembly for Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators. This is the main light driver in a three-board lighting system used on many of these refrigerators — it not only illuminates its own location, but also supplies power to the other LED lights in both the refrigerator and freezer compartments. The companion boards in this same system use a tapered lens cover, sold separately as our W10515057 listing. Measuring approximately 5" x 3", rated 120V, with a durable plastic lens and integrated LED circuit. Because this board supplies power to lights beyond its own location, a failure here can affect lighting throughout more of the refrigerator than just the spot where this assembly is mounted. Symptoms of a failing assembly include this light being dim, flickering, or not turning on, and in some cases, other lights elsewhere in the refrigerator or freezer being affected as well, since they depend on this board for power. It directly replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142. Quick Answer The W10515058 Refrigerator LED Light & Cover fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators with a dim, flickering, or non-working interior light — sometimes affecting lighting elsewhere in the fridge or freezer too, since this board supplies power to those lights as well. Flat lens cover, ~5" x 3", 120V. Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, 3021142. This is the flat-lens board that powers both the refrigerator and freezer lights — a different part from our W10515057 listing, which uses a tapered lens and is typically needed in pairs (2 tapered + 1 flat per refrigerator). Common Problems This Part Fixes Interior light dim or flickering Interior light not turning on at all Other lights elsewhere in the refrigerator or freezer also affected All refrigerator lights strobing together when a door opens Reduced visibility inside the refrigerator or freezer compartment Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator LED light and cover assembly directly replaces the following OEM and cross-reference part numbers: WPW10515058, W10515058, W10465957, W10522611, AP6022534, AWP993990, EAP11755867, PD00030078, PS11755867 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This LED light and cover assembly is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, KitchenAid, and Ikea refrigerators built on the Whirlpool platform, including model numbers such as: WRS325FDAM02, WRS325FDAM04, WRS322FDAM04, WRS322FDAW04, WRS325FDAB02, WRS325FDAB06, WRS325FNAM, WRS335FDDM01 MSB27C2XAM00, MSB27C2XAW00, MSF22D4XAB00, MSF22D4XAB01, MSF22D4XAM00, MSF22D4XAM01, MSF22D4XAW00, MSF22D4XAW01 MSF25D4MDM00, MSF25D4MDM01, MSF25D4MDM02, MSF25D4XAW00, MSF25D4XAB00, MSF25D4XAM00 MSF21D4MDH00, MSF21D4MDH01, MSF21D4MDE00, MSF21D4MDE01, MSF21D4MDE02, MSF21D4MDM00, MSF21D4MDM01 MSF25D4MDE00, MSF25D4MDE01, MSF25D4MDE02, MSF25D4MDE03, MSF25D4MDH00, MSF25D4MDH01, MSF25D4MDH02, 8MSF25N4BW00, 8MSF25N4BW02 Kenmore 106.51132210, 106.51133213, 10651729410, 10641129210, 10641129211, 10641129212, 10641129213, 10651129210, 10651129211, 10651129212, 10651135610 Note — flat lens, not tapered, and typically needed alongside W10515057: This board uses a flat lens cover and serves as the light driver supplying power to the refrigerator and freezer lights. The companion boards in this same lighting system use a tapered lens cover, sold separately as our W10515057 listing — most of these refrigerators use 2 tapered-lens boards and 1 flat-lens board across the full lighting system. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which board your refrigerator needs. Key Features Aftermarket replacement LED light and flat lens cover assembly Main light driver — supplies power to LED lights in both the refrigerator and freezer compartments Resolves "dim or flickering light," "won't turn on," and "lights elsewhere also affected" symptoms Approximately 5" x 3" Rated 120V Durable plastic lens with integrated LED circuit Direct drop-in replacement matching the original mounting Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142 Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number W10515058 OEM Part Number WPW10515058 Part Type Refrigerator LED Light & Flat Lens Cover Assembly Condition Aftermarket Replacement Function Illuminates its location and supplies power to refrigerator and freezer LED lights Lens Type Flat Dimensions Approx. 5" x 3" Voltage 120V Related Part W10515057 (tapered lens, sold separately, typically 2 needed per system) Repair Difficulty Medium Quantity 1 LED light and cover assembly Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Ikea Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power to the refrigerator before beginning, and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Locate the flat-lens light assembly — this is the main driver board and may be positioned differently from the tapered-lens boards elsewhere in the same refrigerator. Use a flathead screwdriver to detach the front tabs and release the lens cover from the housing. Disconnect the wiring harness from the LED board. Remove the mounting screws or clips securing the old assembly and take it out. Install the new W10515058 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Snap the flat lens cover back into place. Restore power and confirm this light turns on normally, and check that lighting elsewhere in the refrigerator and freezer is also functioning correctly, since this board supplies their power. Tools needed: flathead screwdriver, work gloves. Frequently Asked Questions Why does replacing this one board sometimes fix lights in other parts of my refrigerator? This board doesn't just light its own location — it also supplies power to the other LED lights in both the refrigerator and freezer compartments. If this board fails or malfunctions, it can affect lighting elsewhere in the unit even though the other light boards themselves are working fine. This is why some refrigerators show strange symptoms, like all the lights strobing together, when only this one board has actually failed. Is this the same as your W10515057 listing? No, these are different parts in the same lighting system. This W10515058 uses a flat lens cover and serves as the main power driver, while our W10515057 listing uses a tapered lens and is typically needed in pairs elsewhere in the same refrigerator. Most of these refrigerators use 2 tapered-lens boards (W10515057) and 1 flat-lens board (this W10515058) altogether. Is this a difficult repair? It's rated as a medium-difficulty repair — straightforward for a confident DIYer with a flathead screwdriver, but slightly more involved than the simplest appliance fixes since it involves detaching cover tabs and working with the wiring harness behind the lens. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the LED module, flat lens cover design, and mounting configuration of the original WPW10515058 assembly used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

5304523741 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling efficiently with the 5304523741 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved replacement circulates cold air from the evaporator throughout the refrigerator and freezer compartments. A failing fan motor can cause uneven temperatures, frost buildup, or warm sections in your fridge. Installing this genuine OEM part ensures quiet, dependable air circulation and consistent cooling performance. Replaces Part Numbers 5304523741, AP6983831, EAP12746805, 4960926, PD00067011, PS12746805. Compatibility This genuine OEM fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFSS2615TS0, Electrolux LFHB2751TF, and Kenmore 253.70313214. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved motor for reliable cooling performance ❄️ Efficient Air Circulation – Distributes cold air evenly throughout the compartments 💰 Energy-Efficient Operation – Restores temperature consistency and reduces compressor strain 🛠️ DIY Friendly – Direct-fit replacement installs in minutes 🛡️ Fixes Common Issues – Solves warm freezer, frost buildup, or noisy fan motor problems 📐 Product Specification Part Number: 5304523741 Component Type: Refrigerator Evaporator Fan Motor Material: Metal and high-temperature plastic housing Mounting: Direct-fit replacement in freezer compartment Operating Conditions: Designed for continuous low-temperature operation Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove freezer shelves and back panel. Locate and disconnect the wiring harness from the old fan motor. Remove mounting screws and take out the old motor and fan blade. Transfer the fan blade (if required) to the new 5304523741 motor. Mount the new motor, reconnect wiring, and reinstall back panel. Restore power and confirm even cooling and quiet operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧊 Genuine OEM Replacement Part 🔄 30-Day Return Policy Keep your refrigerator running at peak performance — Add to Cart Now for a genuine, factory-approved repair!

Read more less

XPARTCO MHY62044106 Refrigerator Door Mullion Spring - Compatible with LG, Kenmore Refrigerators Product Description Restore proper sealing in your refrigerator with the replacement MHY62044106 Refrigerator Door Mullion Spring. This high-quality spring, designed for LG and Kenmore French-door refrigerators, ensures the mullion flap closes securely, maintaining an airtight seal between the doors to prevent energy loss and maintain cooling efficiency. Made of heavy-duty steel with a clockwise winding and 6 coils, this spring fits into the mullion hinge to resolve issues like doors not closing properly, mullion flap misalignment, or beeping alarms. Note: Includes one spring. Disconnect power before installation. Replaces part numbers: MHY62044106, 2676261, MHY62044104, PD00035635, EAP6012670, AP5657415, PS6012670 Compatibility: Compatible with models including but not limited to: LG: LFC25765ST, LFX21976ST, LFX25973ST, LFX25976ST, LFX25978SB, LFX25978ST, LFX25991ST, LFX28968SB, LFX28968ST, LFX28978SB, LFX28978ST, LFX28979ST, LFX31925SB, LFX31925ST, LFX31935ST, LFX31945ST, LMX28988ST, LMX31985ST Kenmore: 795.71054.010, 795.71056.011, 795.71063.011 Other LG models: GF-B620BSL, GF-B620PL, GF-D613SL, GF-L613PL, GM-F208ST, GR-L218ASL, GR-L218CSL Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG and Kenmore French-door refrigerator models. 🔥 Specifications: replacement mullion spring, clockwise wound, 6 coils, heavy-duty steel, approximately 1-1/8" long, two legs (one shorter for door side), corrosion-resistant. 💰 Cost-Effective Alternative: replacement spring offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, pliers, work gloves; typically installed in 15–30 minutes. 🛡️ Reliable Fixes: Resolves doors not closing, mullion flap misalignment, beeping alarms, or cooling inefficiencies. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your refrigerator seals perfectly today! Add to cart now for a budget-friendly fix!

Read more less

WPW10165425 Refrigerator Genuine Defrost Thermostat Replaces Part Numbers: WPW10165425, W10165425, 126393249SP, 12639324SP, 1455131, OEM24064262, AP6016065, PS11749348. Description: This Bimetal Defrost Thermostat is a Genuine OEM part for select Whirlpool refrigerator models. It plays a vital role in the defrost system, regulating the freezer temperature to prevent excessive frost buildup. The thermostat serves as a safety device by shutting off power to the defrost heater if the temperature gets too high, thereby protecting the appliance from overheating and potential damage.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

Genuine Whirlpool OEM Whirlpool WPW10184813 Refrigerator Genuine OEM Ice Dispenser Motor Genuine OEM ice-dispenser door motor for select Whirlpool-built refrigerators. Product Overview The Whirlpool WPW10184813 Refrigerator Ice Dispenser Door Motor is a Genuine Whirlpool OEM replacement part. It opens and closes the ice chute door during dispenser operation so ice can pass through the chute and the door can reseal afterward. A failed motor can cause the dispenser door to remain stuck open or closed, prevent ice from dispensing correctly, or allow warm room air to enter the chute area. Quick Answer WPW10184813 is the Genuine Whirlpool OEM ice-dispenser door motor that replaces W10184813 and 2305262. Verify the complete refrigerator model number before purchase. Common Problems This Part May Fix Ice dispenser door will not open Ice chute door will not close Ice maker makes ice but ice will not dispense Chute door sticks or operates intermittently Warm air enters around the dispenser chute Frost or moisture develops around the dispenser opening Replaces and Cross-References WPW10184813, 1489085, 2305262, AP6016508, EAP11749796, W10184813, AWP49407, OEM18049533, PD00006398, PS11749796 Cross-reference numbers are provided for identification. Always verify compatibility by complete refrigerator model number. Compatibility Used on select Whirlpool-built refrigerators sold under Whirlpool, KitchenAid, JennAir, Maytag, and Kenmore brand names. Compatible model examples include: GI7FVCXWY00 KSCS25FTMS02 KSRS25FTSS01 KSCS23FVMS02 KSRS25RSBT01 KSCS25FVMS01 KSCS25FTSS00 GC3NHAXVA00 106.56702500 Important: This is only a partial model list. Confirm the complete model number from the refrigerator identification label before ordering. Key Features Genuine Whirlpool OEM part Operates the ice dispenser chute door Replaces W10184813 and 2305262 For select Whirlpool-built side-by-side and French-door refrigerators Helps restore proper dispenser-door opening and closing Product Specifications Manufacturer Part Number WPW10184813 Brand Whirlpool Part Type Refrigerator Ice Dispenser Door Motor Condition New Quality Genuine OEM Application Ice Dispenser Chute Door Package Quantity 1 Motor Installation Notes Disconnect refrigerator power before service. Remove the dispenser trim and front components according to the appliance service procedure. Photograph connector and mechanical linkage positions before disassembly. Inspect the chute door, hinge, spring, and linkage for binding or damage before replacing the motor. Transfer or reconnect the wiring and linkage exactly as originally installed. Reassemble all dispenser parts and verify the chute door opens and fully closes before returning the refrigerator to service. Diagnostic tip: A dispenser that will not release ice can also be caused by an actuator, dispenser switch, control board, auger motor, frozen chute, or mechanical obstruction. Diagnose the dispenser system before replacing parts. Frequently Asked Questions Is WPW10184813 a Genuine Whirlpool OEM part? Yes. WPW10184813 is a Genuine Whirlpool OEM ice-dispenser door motor. Does it replace W10184813? Yes. Whirlpool lists WPW10184813 as the replacement for W10184813 and 2305262. What does this motor do? It opens and closes the dispenser chute door so ice can pass through the chute and the opening can reseal after dispensing. Will it fit every Whirlpool refrigerator? No. Verify the complete refrigerator model number before ordering because dispenser designs vary by model and production revision. Shop With Confidence Genuine Whirlpool OEM replacement part. Verify your complete refrigerator model and original part number before ordering. Genuine OEMIce Dispenser MotorCompatibility SupportFast U.S. Shipping

Read more less

AJU34125552 Genuine OEM LG Refrigerator Water Inlet Valve The AJU34125552 is a genuine LG OEM water inlet valve for LG refrigerators, supplying water to both the ice maker and the door water dispenser from a single valve assembly. Mounted at the rear of the refrigerator where the household water supply line connects, this valve opens on command from the control board to admit water for either feature, and closes again once the request is satisfied. Common causes of failure include mineral and sediment buildup from hard water interfering with the internal solenoid over time, and general electrical wear. A failing valve typically shows up as the ice maker no longer producing ice, the water dispenser slowing down or stopping entirely, or both symptoms appearing together since one valve serves both functions. Quick Answer The AJU34125552 Genuine OEM LG Refrigerator Water Inlet Valve fixes LG refrigerators where the ice maker stopped making ice, the water dispenser isn't working, water flow is slow, or there's a leak near the valve at the back of the refrigerator. Supplies both the ice maker and dispenser from one valve. Common Problems This Part Fixes Ice maker has stopped making ice, or is producing less ice than usual Water dispenser on the refrigerator door isn't working or has slowed down Both the ice maker and water dispenser affected together Slow water flow at the dispenser Water leaking near the valve at the back of the refrigerator No water or ice production at all Valve failure following known hard water conditions at the home Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers AJU34125552, EAP10066440, FIX10066440, OEM17872815, PS10066440, AP5957602, ALG1274937, PD00053838. We were not able to confirm additional cross-reference or superseding part numbers for this specific part number from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order. Compatibility This water inlet valve is compatible with select LG refrigerators. Note: A specific verified compatible model list was not available at the time this page was built. LG has used several visually similar water inlet valve part numbers across different refrigerator platforms, and parts that look identical can have small but important differences. Always verify your full model number before ordering. Contact our support team with your model number and we will confirm fitment before you purchase. Key Features Genuine LG OEM part — factory-specified solenoid design and flow-rate calibration Single valve assembly supplies water to both the ice maker and door water dispenser Resolves "ice maker not making ice," "dispenser not working," "slow water flow," and "leak near the valve" symptoms caused by valve failure Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair — typically 15 to 30 minutes Product Specifications Part Number AJU34125552 Part Type Refrigerator Water Inlet Valve (Ice Maker + Dispenser) Condition Genuine OEM Brand LG Location Rear of refrigerator, at the household water line connection Function Supplies water to the ice maker and door water dispenser Repair Difficulty Easy — 15 to 30 minutes Quantity 1 valve assembly Compatible Brand LG Installation Notes ⚠️ Unplug Refrigerator Before Starting — Store Perishable Food Separately Shut off the water supply and unplug the refrigerator before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear of the cabinet where the water supply line connects. Photograph the wiring harness and water line connections before disconnecting anything. On some installations, the wiring harness has been routed between water supply lines, which can make the connector difficult to reach and unplug — if this is the case, gently reposition or loosen a water line first rather than forcing the connector. Disconnect the water supply line from the old valve, disconnect the electrical connector, and remove the mounting screws holding the valve in place, then pull it free. Install the new AJU34125552 in the same position, secure the mounting screws, and reconnect the electrical connector fully — route the wiring the same way the original was routed, avoiding pinch points against the water lines if possible. Reattach the water supply line, tightening securely by hand plus a partial turn with pliers. Restore the water supply and check for leaks before restoring power. Push the refrigerator back into place and test both the ice maker and water dispenser over the following day to confirm normal operation. Tools needed: Phillips screwdriver, adjustable wrench or pliers, work gloves. Frequently Asked Questions My ice maker and dispenser both stopped working at the same time. Is that normal for a valve failure? Yes, this is actually a very telling symptom. Because one valve assembly supplies water to both the ice maker and the door dispenser, a failure inside the valve itself commonly affects both functions simultaneously. If only one of the two has stopped working while the other functions normally, it's worth double-checking the water filter and supply line for a localized restriction before assuming the valve has failed, but a simultaneous failure of both points strongly toward this valve. The wiring harness on my old valve was hard to reach. Is that normal? It can be, depending on how the original installation routed the wiring. Some installations run the harness between two water supply lines, which can make the connector awkward to access and unplug. If you find yourself in this situation, gently repositioning or loosening a nearby water line first — rather than forcing the connector — makes it much easier to disconnect without damaging anything. Could hard water be why my valve failed? Yes, this is a common and well-documented cause. Mineral deposits from hard water can build up inside the valve over time and interfere with the internal solenoid's ability to open and close properly, eventually leading to failure. If you know your home has hard water and this valve has failed, it may be worth considering a water softener or more frequent filter changes to extend the life of the replacement. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It includes the same solenoid design and dual-function (ice maker and dispenser) configuration as the water inlet valve originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

5218JA1010E Refrigerator Drawer Slide Rail Slide Rail - Right Side Replaces Part Numbers: 5218JA1010E, 5218JA1012H, 1268111, AH3527351, EA3527351, AP4444721, PS3527351.  California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

5303918214 Genuine OEM Frigidaire Refrigerator Defrost Thermostat The 5303918214 is a genuine Frigidaire OEM defrost thermostat kit for Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators — commonly used on side-by-side and French door models equipped with an ice maker. This thermostat monitors the temperature of the evaporator coils: when the coils drop below a set temperature, it allows power to reach the defrost heater so frost can be cleared; once the coils warm back up, it cuts power to the heater again, protecting the evaporator from being overheated during that process. The most common reasons this thermostat gets replaced are a classic pair of symptoms: the freezer stays cold while the fresh food refrigerator section runs warm, or the refrigerator simply isn't defrosting on its normal cycle. Because this thermostat sits behind the rear access panel near the ice maker on many compatible models, replacing it typically involves removing the ice maker and the back panel to reach it — a more involved repair than a thermostat mounted in an easily accessible spot. It directly replaces AP2150145, 892545, AH469522, EA469522, PS469522, and 75303918214. As a genuine OEM part, the 5303918214 is manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. Quick Answer The 5303918214 Genuine OEM Frigidaire Refrigerator Defrost Thermostat fixes Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators where the freezer stays cold but the fresh food section runs warm, or the refrigerator isn't defrosting on its normal cycle. Replaces AP2150145, 892545, AH469522, EA469522, PS469522, 75303918214. This is a separate part from our 5303918202 defrost thermostat listing — the two fit different model groups and are not interchangeable. Installation on many compatible models requires removing the ice maker to access the thermostat. Common Problems This Part Fixes Freezer stays cold but the fresh food refrigerator section runs warm Refrigerator not defrosting on its normal cycle Excessive frost or ice buildup on the evaporator coils Refrigerator or freezer not cooling properly overall Water leaking inside the refrigerator from melting ice buildup Refrigerator running constantly as ice-caked coils reduce cooling efficiency Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator defrost thermostat directly replaces the following OEM and cross-reference part numbers: 5303918214, 75303918214, 892545, AH469522, EA469522, AP2150145, 240372703, 39TVE31, EAP469522, PS469522, AFR16819, PD00000354, L47-22F, SL8214, ER5303918214 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This defrost thermostat is compatible with select Frigidaire refrigerators, and also fits select Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators built on the same platform, including model numbers such as: FGHS2631PF4A, FGHS2655PF5A FGHC2331PFAA, FGHC2331PFCA FFHS2611PFEA, FFHS2611LBRA, FFHS2611LWMA, FFHS2622MSYA FFSS2614QS6A Note — not the same as 5303918202: This is a separate thermostat from our 5303918202 listing. The two fit different model groups and are not interchangeable, so always verify your full model number rather than assuming based on similar part number prefixes. Contact our support team with your model number if you're unsure which thermostat fits your refrigerator. Key Features Genuine Frigidaire OEM part — factory-specified temperature threshold and mounting configuration Defrost thermostat kit for Frigidaire-platform refrigerators with an ice maker Monitors evaporator coil temperature and controls power to the defrost heater Resolves "freezer cold, fridge warm," "not defrosting on schedule," and "icy evaporator coils" symptoms caused by thermostat failure Ships with wiring diagram guidance for a correct connection Direct drop-in replacement — mounts to the original housing location Replaces AP2150145, 892545, AH469522, EA469522, PS469522, and 75303918214 Compatible with Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 5303918214 Part Type Refrigerator Defrost Thermostat Kit Condition Genuine OEM Function Monitors evaporator coil temperature and controls power to the defrost heater Typical Location Rear access panel area, near the ice maker on many compatible models Repair Difficulty Moderate — ice maker removal typically required for access Quantity 1 defrost thermostat kit Compatible Brands Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, Crosley Installation Notes ⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Unplug the refrigerator from the wall outlet and turn off the water supply to the refrigerator before beginning. Wear work gloves. If your model has an ice maker, remove it first using a screwdriver to gain clearance for the next steps. Remove the back panel with a screwdriver to expose the defrost thermostat. Take out the existing thermostat and disconnect its wiring, labeling or photographing each connection first. Install the new 5303918214 thermostat by connecting the wires according to the wiring diagram provided with the kit, then secure the thermostat to the main housing using the small mounting screws. Reinstall the back panel, plug the refrigerator back in, turn the water supply back on, and reinstall the ice maker. Test the refrigerator over the following day to confirm both compartments are cooling evenly and the defrost cycle is running normally. Tools needed: screwdriver, wire cutters/strippers, work gloves. Frequently Asked Questions Do I really need to remove the ice maker for this repair? On many compatible models, yes — the thermostat sits behind the rear access panel in an area that the ice maker partially blocks, so removing it first gives you the clearance needed to reach the panel and the thermostat behind it. It's an extra step compared to some simpler defrost thermostat replacements, but it's a standard part of this particular repair. My freezer is cold but the fridge is warm. Is this the thermostat? Yes, this is the classic symptom of a failed defrost thermostat. When it fails, the defrost heater can't run correctly to clear frost from the evaporator coil, and the resulting ice buildup blocks the airflow that's supposed to carry cold air to the fresh food compartment. The freezer, sitting closer to the coil, often stays reasonably cold, while the fresh food side runs warm since it depends on that circulated air. I replaced the thermostat but my freezer temperature is still fluctuating. What should I check next? Replacing this thermostat resolves the issue for most customers, but if fluctuation continues, it's worth checking the other components in the same defrost circuit — the defrost timer and defrost heater — since a failure in either of those can produce similar temperature instability even with a good thermostat installed. It's also worth confirming the door seals are sealing properly, since a poor seal lets warm air in and can cause temperature swings unrelated to the defrost system. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original temperature threshold, mounting configuration, and function of the defrost thermostat originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Refrigerator Replacement Part WPW10276792 Refrigerator Genuine Water Reservoir Tubing Genuine water reservoir tubing for select refrigerator water-dispensing systems. Product Overview The WPW10276792 Refrigerator Water Reservoir Tubing is a genuine replacement part designed for compatible refrigerators. The tubing routes and stores chilled water within the refrigerator water system before water is delivered to the dispenser. Use this part when the original tubing is leaking, cracked, kinked, damaged, or otherwise unable to maintain proper water flow. Quick Answer WPW10276792 is genuine refrigerator water reservoir tubing for compatible models. Replace it when the original tubing is leaking, split, damaged, or restricting normal dispenser water flow. Common Problems This Part May Fix Water leaking inside the refrigerator Cracked or split reservoir tubing Kinked tubing restricting water flow Reduced or inconsistent dispenser water flow Damaged tubing connections or fittings Replaces and Cross-References WPW10276792, 1874366, 2223876, 2305226, 2307107, W10204356, W10276792, W10526445, WP2305226, AP6018425, AWP50256, EAP2580224, PD00028740, PS2580224 Part number is provided for identification. This listing is for a genuine replacement part. Compatibility Fits select refrigerators that specify water reservoir tubing part number WPW10276792. Important: Verify the complete refrigerator model number and original tubing part number before ordering. Refrigerator water tubing can differ in length, routing, connector style, and reservoir design. Key Features Genuine replacement part Designed for compatible refrigerator water systems Routes and stores chilled dispenser water Helps restore proper water flow and leak-free operation Direct replacement for applications calling for WPW10276792 Product Specifications Part Number WPW10276792 Part Type Refrigerator Water Reservoir Tubing Application Compatible Refrigerators Function Water storage and routing for dispenser system Condition New Part Quality Genuine Replacement Part Package Quantity 1 Tubing Assembly Installation & Troubleshooting Notes Disconnect refrigerator power and shut off the household water supply before service. Relieve water pressure from the dispenser system before disconnecting tubing. Inspect the original tubing for leaks, splits, kinks, or damaged fittings. Route the replacement tubing in the same path and orientation as the original. Confirm all connections are fully seated and secure. Restore the water supply and carefully check for leaks before returning the refrigerator to normal use. Diagnostic tip: A dispenser leak may also come from a valve, connector, fitting, or dispenser line. Confirm the source of the leak before replacing the reservoir tubing. Frequently Asked Questions What does WPW10276792 do? It routes and stores water within the refrigerator water system before the water is delivered to the dispenser. Is WPW10276792 a genuine part? Yes. This listing is for a genuine replacement water reservoir tubing assembly. When should this tubing be replaced? Replace it if it is leaking, cracked, split, kinked, damaged, or restricting normal water flow. Will this fit every refrigerator? No. Match the complete refrigerator model number and original part number before ordering. Shop With Confidence Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether WPW10276792 is correct for your appliance. Genuine ReplacementWater Reservoir TubingModel Fitment SupportFast U.S. Shipping

Read more less

WR9X502 Refrigerator Genuine OEM Defrost Timer Description: This Defrost Timer is an OEM part for GE refrigerators. This part manages the defrost cycle of the fridge and freezer compartments, ensuring that the evaporator coils do not build up excessive frost.   This cycling is crucial for maintaining optimal temperatures for food preservation and energy efficiency. Over time, the defrost timer can malfunction due to wear, electrical issues, or a buildup of dust and debris, leading to poor performance or failure. Replaces Part Numbers:WR9X502, WR09X10049, WR09X0278, WR09X0283, WR09X0313, WR09X0329, WR09X0334, WR09X0339, WR09X0342, WR09X0350, WR09X0356, WR09X0363, WR09X0364, WR09X0366, WR09X0375, WR09X0387, WR09X0408, WR09X0409, WR09X0418, WR09X0419, WR09X0428, WR09X0432, WR09X0438, WR09X0466, WR09X0468, WR09X0470, WR09X0478, WR09X0479, WR09X0481, WR09X0484, WR09X0486, WR09X0487, WR09X0490, WR09X0495, WR09X0502, WR09X0503, WR09X0504, WR09X0526, WR09X0528, WR09X0576, WR09X0594, WR09X5161, WR09X5162, WR09X5163, WR09X5164, WR09X5192, WR09X5202, WR09X5204, WR09X5211, WR09X5225, WR9X10049, AH310869, EA310869, AP2061708, PS310869.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WPW10190981 Genuine OEM Whirlpool Refrigerator Ice Maker The WPW10190981 is a genuine Whirlpool OEM ice maker assembly for Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana French door refrigerators. This assembly receives water from the refrigerator's water inlet, holds it in the ice mold until it freezes, then uses a heating element to loosen the finished ice from the mold and automatically eject it — a rotating arm pushes the ice into the storage bin, and the cycle repeats until the bin is full. This is a modular-style assembly, and it does not include a new cover, ice level arm, or wire harness — these three components must be reused from your existing ice maker. If the coating on your current ice maker's mold is flaking off, or if internal components are no longer functioning correctly, replacing the assembly resolves both problems together. It directly replaces W10122533 and W10190981. Quick Answer The WPW10190981 Genuine OEM Whirlpool Refrigerator Ice Maker fixes Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana French door refrigerators that have stopped making ice, are producing less ice than usual, or have a mold with flaking coating. Replaces W10122533, W10190981. This assembly does not include the cover, ice level arm, or wire harness — you must transfer these three components from your old ice maker to the new one during installation. Common Problems This Part Fixes Ice maker has stopped producing ice entirely Ice maker producing less ice than it used to Ice mold coating visibly flaking or deteriorating Ice maker cycling but not ejecting ice into the bin Internal ice maker components no longer functioning correctly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers: WPW10190981, W10190981, 1471732, W10122533, AP6016630, AWP49581, OEM18049899, PD00007257, PS11749922 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This ice maker is compatible with select Whirlpool French door refrigerators, and also fits select Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana refrigerators built on the Whirlpool platform, including model numbers such as: MFI2269VEM, MFI2269VEW, MFI2269VEB, GI0FSAXVY, KFIS20XVMS 7GI5FSAXVY1, 7GI5FSAXVY2, 7GI5FSAXVY3 7MI2569VEM1, 7MI2569VEM3 (Maytag) GI5FVAXVQ00, GI0FSAXVA01, GI0FSAXVB01, GI0FSAXVB02, GI0FSAXVQ01, GI0FSAXVY01, GI0FSAXVY03 GI5FSAXVA00, GI5FSAXVA01, GI5FSAXVB00, GI5FSAXVB01, GI5FSAXVB02, GI5FSAXVQ00, GI5FSAXVQ01 Note: Always verify your full model number before ordering, since Whirlpool uses several different ice maker designs across its French door refrigerator lineup. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified mold design and cycling mechanism Automatically fills, freezes, and ejects ice into the storage bin Resolves "not making ice," "reduced ice production," and "flaking mold coating" symptoms Modular-style assembly for straightforward replacement Direct drop-in replacement for the ice maker body — reuses your existing cover, ice level arm, and wire harness Replaces W10122533 and W10190981 Compatible with Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana French door refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WPW10190981 Part Type French Door Refrigerator Ice Maker Assembly Condition Genuine OEM Brand Whirlpool Function Fills, freezes, and ejects ice via heating element and rotating arm Includes Cover, Ice Level Arm, Wire Harness No — reuse from existing ice maker Repair Difficulty Moderate — basic hand tools, some disassembly required Quantity 1 ice maker assembly Compatible Brands Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, Amana Installation Notes ⚠️ Unplug Refrigerator Before Starting — This Assembly Does Not Include The Cover, Ice Level Arm, Or Wire Harness Disconnect power to the refrigerator, or shut off the house circuit breaker for the appliance, before beginning. Wear work gloves. Move perishable food to a cooler for the duration of the repair. Open the freezer door and remove the ice bucket or drawer to access the ice maker. Photograph the wiring harness connection and the position of the cover and ice level arm before disconnecting anything. Remove the mounting screws securing the old ice maker in place, then disconnect the wire harness connector. Before setting the old ice maker aside, remove its cover, ice level arm, and wire harness — none of these three components are included with this replacement assembly, and you'll need to transfer all of them onto the new WPW10190981. Attach the cover, ice level arm, and wire harness from your old ice maker onto the new assembly, making sure each is seated and connected correctly. Mount the new assembly in the same position, reconnect the wire harness connector, and secure the mounting screws. Reinstall the ice bucket or drawer. Restore power and allow several hours for the first cycle to complete, confirming ice is being produced and ejected normally. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions Does this ice maker come complete and ready to install? Not entirely — this assembly does not include a new cover, ice level arm, or wire harness. You'll need to remove these three components from your existing ice maker and transfer them onto this new assembly during installation, since only the ice maker body itself is included. My ice mold's coating is flaking. Should I replace the whole assembly? Yes. The mold coating isn't a separately serviceable part — if it's flaking off, replacing the complete ice maker assembly is the correct fix, since a damaged coating can affect ice quality and won't improve on its own. Is this a difficult repair? It's considered a moderate repair requiring basic hand tools, some disassembly of the refrigerator, and novice repair experience. The extra step of transferring the cover, ice level arm, and wire harness from your old unit adds a bit more care to the process compared to a fully complete replacement assembly, but it's manageable for a confident DIYer. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original mold design, heating element, and cycling mechanism of the ice maker originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine GE OEM Part GE WR55X36435 Refrigerator Genuine OEM Inverter Board Compressor inverter/control board for select GE refrigerator platforms. Product Overview The GE WR55X36435 Refrigerator Inverter Board is a Genuine GE OEM replacement part designed for compatible GE refrigerators. The inverter board supplies and controls electrical power to the variable-speed compressor, allowing the refrigerator control system to regulate compressor operation for proper cooling performance. Quick Answer WR55X36435 is a Genuine GE OEM refrigerator compressor inverter board. It replaces WR55X31991 and WR87X32289 on compatible models. Always verify the full refrigerator model number before ordering because inverter boards are model-specific electronic controls. Common Problems This Part May Fix Compressor does not start Refrigerator is not cooling properly Compressor starts and stops unexpectedly Intermittent cooling caused by inverter failure Diagnostic fault related to compressor drive/control Replaces and Cross-References WR55X36435, WR87X32289, WR55X31991, AP6980849, AP7176581, EAP16660026, AGE29171, OEM21529752, PD00078524, PS16660026 Cross-reference numbers are for identification. Verify your exact appliance model before purchase. Compatibility Designed for select GE bottom-mount and French-door refrigerator platforms. Compatible model examples include: CVE28DP3NBD1 CVE28DP4NBW2 CVE28DM5NBS5 PVD28BYNCFS PVD28BYNFS PGD29BYTBFS PGD29BYTCFS CGE29DP2TBS1 CXE22DP2PBS1 Important: This is only a partial compatibility list. Inverter boards can look similar while using different firmware, connectors, or compressor specifications. Confirm the complete model number before ordering. Key Features Genuine GE OEM replacement part Controls/supplies power to the compressor Replaces WR55X31991 and WR87X32289 Factory-designed electrical connectors and mounting For select GE refrigerator platforms Product Specifications Manufacturer Part Number WR55X36435 Brand GE Appliances Part Type Refrigerator Compressor Inverter Board Condition New Part Quality Genuine OEM Primary Function Supplies and controls power to the compressor Approx. Shipping Weight 0.65 lb Package Quantity 1 Inverter Board Installation Notes Unplug the refrigerator before service. Protect perishable food while power is disconnected. Verify the exact appliance model and original inverter part number. Document wiring and connector locations before removal. Inspect the compressor harness, connectors, and related wiring for heat damage or corrosion. Install the replacement in the original mounting location and reconnect all plugs fully. Reassemble all covers before restoring power. Electronic diagnostic note: A no-start compressor can also be caused by the compressor itself, main control board, wiring, sensors, or supply-voltage problems. Diagnose the system before replacing the inverter board. Frequently Asked Questions Is WR55X36435 a Genuine GE OEM part? Yes. WR55X36435 is a Genuine GE Appliances inverter board. Does it replace WR55X31991? Yes. WR55X31991 is a previous part number replaced by WR55X36435 on compatible models. Does it replace WR87X32289? Yes. WR87X32289 is also a previous part number replaced by WR55X36435 on compatible models. What does the inverter board do? It supplies and controls electrical power to the refrigerator compressor so the cooling system can operate at the commanded speed and load. Will this fit every GE refrigerator? No. Verify the complete model number because compressor inverter boards are model-specific. Shop With Confidence Use the complete refrigerator model number to confirm fitment before purchase. Genuine OEM electronics are designed for the specific electrical and compressor requirements of compatible GE models. Genuine GE OEMCompressor InverterCompatibility SupportFast U.S. Shipping

Read more less