XPARTCO 6501EA1001R Washer Pressure Switch – Compatible with LG & Kenmore Washers Product Description Restore accurate water level control with the XPARTCO 6501EA1001R Washer Pressure Switch. This high-quality aftermarket replacement monitors air pressure from the tub to regulate water fill levels during wash cycles. A faulty pressure switch can cause overfilling, under-filling, continuous filling, or washer error codes. Replacing it with this reliable XPARTCO switch ensures proper water sensing and consistent washer performance. Replaces Part Numbers 6501EA1001R, EBF62754506, 2651052, 5210FA3427J, 6501EA1001C, PD00022947, EAP3529177, AH3529177, EA3529177, AP5204365, OEM20817462, PS3529177. Compatibility This replacement washer pressure switch fits select LG and Kenmore (LG-manufactured) top-load and front-load washers. Example compatible models include (but are not limited to):LG WM2016CW, WM2277HWKenmore 796.40512900, 796.41073310 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM water-level sensing accuracy 💧 Precise Water Control – Regulates fill levels to prevent overfilling or underfilling 🔧 Reliable Pressure Detection – Responds accurately to tub air pressure changes 💰 Cost-Effective Solution – Quality performance without OEM pricing 🛡️ Fixes Common Issues – Solves fill errors, overflow, washer not stopping fill, or cycle faults 📐 Product Specification Part Number: 6501EA1001R Component Type: Washer Pressure / Water Level Switch Voltage: 120V AC Connection Type: Hose barb with electrical terminals Mounting: Control panel or cabinet mounted (model dependent) Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers ⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock. Steps: Disconnect power and access the washer control panel. Locate the pressure switch and disconnect the air hose. Remove wiring connectors and mounting screws. Install the new XPARTCO 6501EA1001R pressure switch. Reconnect the hose and wiring, then reassemble the panel. Restore power and test water filling operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Ensure accurate washer water levels again — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO 6501KW2001A Washer Rotor Positioning Sensor – Compatible with LG and Kenmore Washers Product Description Restore accurate motor control and spin performance with the XPARTCO 6501KW2001A Washer Rotor Positioning Sensor. This Sensor Assembly, also known as a hall sensor is a replacement Part and is a vital component in Specific LG, Kenmore washer Models. This part monitors the direction and speed of the spinning rotor. It then communicates this information to the electronic control board. By doing so, it aids in the precise operation of your washer. If your washer pumps but fails to spin or agitate, it may be indicative of a damaged sensor assembly. Replaces Part Numbers 6501KW2001A, 6501KW2001D, PD00001726, EAP2497738, 6501KW2001C, EBR37560301, AP4457567, PS3529185.  Compatibility This replacement rotor positioning sensor fits select LG and Kenmore front-load washers. Example compatible models include (but are not limited to): LG WM2101HW, LG WM2487HRM, and Kenmore 796.40272900. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM performance and accuracy ⚙️ Precise Motor Feedback – Helps control drum rotation and spin speed 💰 Cost-Effective Solution – High-quality alternative to OEM sensor assembly 🛠️ Easy Installation – Plug-and-play design with secure connector fit 🛡️ Fixes Common Issues – Resolves LE, UE, or spin-related error codes 📐 Product Specification Part Number: 6501KW2001A Component Type: Washer Rotor Position Sensor (Hall Sensor) Material: High-durability circuit board and plastic housing Mounting: Direct-fit replacement on motor stator assembly Operating Conditions: Designed for high-humidity washer environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: 10mm socket wrench, Phillips screwdriver ⚠️ Safety First: Always unplug the washer before performing any repairs to prevent electrical shock. Steps: Disconnect power and remove the rear access panel. Remove the rotor bolt and pull off the rotor assembly. Locate and disconnect the wiring harness from the old sensor. Remove the old 6501KW2001A sensor and install the new XPARTCO replacement. Reconnect wiring, reinstall the rotor, and secure the rear panel. Restore power and run a spin test to verify repair. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer spin and motor issues — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

6600JB3001C Refrigerator Dispenser Switch – Replacement for GE, LG and Kenmore Product Overview This Dispenser Switch is a replacement part for specific LG, Kenmore, GE refrigerator models. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use. Replaces Part Numbers This dispenser switch replaces part numbers 6600JB3001C, 1268245, 1395586, 6600JB3001B, 6600JB3001H, PD00025340, EAP3529276, AH3529276, EA3529276, AP4441530, PS3529276, WR23X10783, 2695743, WR23X10171, WR23X10224, AP5688654, PS8259956. Engineered to deliver OEM-level performance and compatibility. Compatible Brands Compatible with LG and Kenmore refrigerators manufactured by LG. Fits various French door, side-by-side, and bottom-freezer models with front panel dispensers. Fixes the Following Issues Water or ice dispenser not working Dispenser works only when pressed a certain way No power reaching water or ice components Intermittent or unresponsive dispenser control Why Buy from Parts‑O‑Matic Durable and reliable aftermarket replacement Fast and free U.S. shipping Simple to install with plug-in compatibility Trusted by appliance repair techs and homeowners

Read more less

XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE Product Description Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing. Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277. Compatibility: Compatible with models including but not limited to: LG: LSC24971ST/00, LRSC21934SW Kenmore: 79571039010, 79571039011, 79578789801 GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers. 🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals. 💪 Reliable Performance: Ensures precise activation of ice and water dispensing. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues. Product Specification Part Number: XPARTCO 6600JB3001E Component Type: Refrigerator dispenser micro switch Material: Plastic housing, metal contacts Electrical Rating: 16A 1/2HP, 125/250VAC Mounting: Snap-in or screw-mounted, 1/4" terminals Operating Conditions: Suitable for refrigerator dispenser environments Compliance: UL listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO 6602-001655 Dryer Drum Belt – Compatible with Samsung & Kenmore Dryers Product Description Restore proper drum rotation and reliable drying performance with the XPARTCO 6602-001655 Dryer Drum Belt. This Belt is a replacement part is compatible with specific Samsung dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced. Replaces Part Numbers 6602-001655, 6602-001314, 5PH2337, PD00002012, EAP2407938, AP4373659, PS4133825. Compatibility This replacement dryer drum belt fits select Samsung and Kenmore (Samsung-manufactured) dryers. Example compatible models include (but are not limited to):Samsung DV45H7000EW, DV42H5200EPKenmore 592-89045, 592-89047 Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM belt length, width, and tension 🌀 Restores Drum Rotation – Ensures smooth, consistent tumbling 💪 Reinforced Rubber Construction – Designed to resist stretching and wear 💰 Cost-Effective Repair – Reliable performance without OEM pricing 🛡️ Fixes Common Issues – Solves drum not turning, squealing noises, or slipping belt 📐 Product Specification Part Number: 6602-001655 Component Type: Dryer Drum Belt Material: Reinforced rubber Belt Style: Ribbed, 5 Rib, 92" Application: Motor-to-drum drive system Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock. Steps: Disconnect dryer power and open the cabinet. Remove the drum to access the belt path. Remove the worn belt from the motor and idler pulleys. Install the new XPARTCO 6602-001655 belt following the original routing. Reinstall the drum, reassemble panels, and restore power. Run a test cycle to confirm proper operation. ⏱️ Time Required: 30–45 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore smooth dryer operation — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO 661570 Dryer Drum Belt Replaces Part Number: 661570V, 661570, 3387610, 3389728, 3393999, 339728, 4248258, 661570VP, AP5983729, PS11722115. Description: This Dryer drive Belt is a replacement part that is guaranteed to keep your dryer running smoothly. Compatible with a range of Whirlpool dryer models, including brands such as Whirlpool, Kenmore, and Maytag. This Drive Belt is an essential component that helps your dryer drum rotate efficiently, ensuring optimal drying performance.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

XPARTCO 6931EL3001E Dryer Thermostat – Compatible with LG and Kenmore Dryers Product Description Maintain proper dryer safety and temperature control with the 6931EL3001E Dryer Thermostat. This replacement part monitors and regulates dryer temperature to prevent overheating and ensure efficient drying cycles. A faulty thermostat may cause your dryer to stop heating, overheat, or shut off unexpectedly. Replacing it restores reliable performance and helps extend the life of your dryer. Replaces Part Numbers 6931EL3001E, 1268363, 6931EL3001B, 6931EL3001C, AH3530481, EA3530481, PD00023869, EAP3530481, AP4440977, PS3530481, L125-31C, 503475. Compatibility This dryer thermostat is compatible with select LG and Kenmore dryer models. Example compatible models include (but are not limited to): LG DLE2516W, DLE7177WM, and Kenmore 796.80272900. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Fits select LG and Kenmore dryers 🔒 Reliable Safety – Prevents overheating by regulating dryer temperature 💰 Cost-Effective Replacement – OEM-equivalent performance at a lower price 🛠️ DIY-Friendly – Quick installation with basic tools 🛡️ Fixes Common Issues – Restores heating, prevents overheating, and fixes dryer shutdown problems 📐 Product Specification Part Number: XP6931EL3001E Component Type: Dryer Thermostat Material: High-heat resistant metal and thermal components Mounting: Direct replacement, mounts on heating element housing Operating Conditions: Designed for residential dryers Compliance: OEM-equivalent performance and safety standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers ⚠️ Safety First: Always disconnect power before starting repairs to avoid electrical shock. Steps: Unplug dryer and remove back access panel. Locate thermostat on heating element housing. Disconnect wire terminals from the old thermostat. Remove screws holding it in place and replace with the new thermostat. Reconnect wires, secure the component, and reinstall the access panel. Restore power and test dryer operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your dryer’s safe operation today — Add to Cart Now for fast, budget-friendly repair!

Read more less

XPARTCO 6931EL3002M Dryer Blower Thermostat – Compatible with LG and Kenmore Dryers Product Description Restore proper temperature regulation in your dryer with the XPARTCO 6931EL3002M Dryer Blower Thermostat. This Dryer Blower Thermostat is a replacement part for select LG dryer models. It plays a role in regulating the operation of the blower motor, which is responsible for circulating hot air throughout the dryer during the drying cycle. Common causes of a bad dryer blower thermostat can include electrical malfunctions, physical damage, or simply wear and tear over time.  Replaces Part Numbers 6931EL3002M, 6931EL3002A, 6931EL3002K, PD00023476, EAP8747887, AP5782317, PS8747887. Compatibility This replacement blower thermostat (mounts on blower housing). fits select LG and Kenmore (manufactured by LG) dryers. Example compatible models include (but are not limited to):LG DLE5977W, DLE3170W, DLEX3470V, and Kenmore 796.81022900. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature control performance 🌡️ Accurate Temperature Regulation – Maintains proper blower housing heat levels. Thermostat 85C, 185F. 💰 Budget-Friendly Option – Provides OEM-level reliability at a lower price 🛠️ Easy Installation – Direct-fit design with standard mounting hardware 🛡️ Fixes Common Issues – Solves overheating, no-heat problems, long dry times, and auto-shutoff issues 📐 Product Specification Part Number: 6931EL3002M Component Type: Dryer Blower Thermostat Material: Metal thermostat housing with bimetal sensor Temperature Rating: Opens/closes at OEM-equivalent temperature thresholds Mounting: Two-screw mounting to blower housing Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before performing repairs to prevent electrical shock and injury. Steps: Disconnect power and remove the dryer’s rear access panel. Locate the blower housing and identify the thermostat. Remove the mounting screws and disconnect the wiring. Install the new XPARTCO 6931EL3002M thermostat in the same position. Reconnect wires, reinstall the panel, and restore power. Run a test cycle to confirm proper temperature cycling. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore safe temperature control — Add to Cart Now for a reliable, cost-effective repair!

Read more less

XPARTCO 6931EL3003D Dryer Hi-Limit Thermal Fuse Replaces Part Numbers: 6931EL3003D, 1268366, 6931EL3003E, AH3530485, EA3530485, AP4440975, PS3530485     Description: This Hi Limit Thermal Fuse is a replacement part for Kenmore, LG dryer models. This fuse is a safety device that protects the dryer from overheating by cutting off power to the heating element if the dryer’s temperature exceeds a safe limit. It ensures that the dryer operates within safe temperature ranges, preventing potential fire hazards. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less