XPARTCO 0130F00010 Gas Furnace Flame Sensor Fits the Specific Goodman Gas Furnace models Replaces Part Numbers:TJFLS013, AP6326767, 0130F00010   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP 903758 Gas Furnace Igniter Fits: Specific Whirlpool, Frigidaire, Gibson, Intertherm, Maytag and Westinghouse Models. #903758. Ceramic block: H. Terminal block: stripped ends. Replaces Part Numbers: 903758, ER903758, IG1114    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 62-23543-01 Gas Furnace Flame Sensor – Compatible with Rheem, Ruud, and WeatherKing Furnaces Product Description Restore safe and reliable furnace operation with the XPARTCO 62-23543-01 Gas Furnace Flame Sensor. This high-quality aftermarket replacement detects the presence of a burner flame and signals the control board to keep the gas valve open. A dirty or failed flame sensor can cause short cycling, ignition failure, or a furnace that won’t stay lit. Replacing it with this durable XPARTCO sensor ensures proper flame detection and dependable heating performance. Specification : The furnace flame sensor is designed to detect the flame.  1/4”male quick connect, Angle - sensor offset: 90 degree. Replaces Part Numbers 62-23543-01,62-23543-02, 62-23543-03, 62-23543-04 Compatibility This replacement flame sensor fits select Rheem, Ruud, and WeatherKing gas furnaces. Example compatible models include (but are not limited to):Rheem RGRJ series, Ruud UGDG series, WeatherKing RGRA series. Always verify your furnace’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM flame-sensing performance 🔥 Accurate Flame Detection – Ensures gas valve remains open only when flame is present 💰 Cost-Effective Repair – Reliable alternative to expensive OEM sensors 🛠️ Simple Installation – Direct-fit design with single mounting screw 🛡️ Fixes Common Issues – Solves furnace short cycling, ignition failure, or burner shutdown 📐 Product Specification Part Number: 62-23543-01 Component Type: Gas Furnace Flame Sensor Material: Stainless steel sensor rod with ceramic insulator Mounting: Single-screw bracket mount Electrical Connection: Spade terminal Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, fine abrasive pad (optional for cleaning) ⚠️ Safety First: Turn off power and gas supply to the furnace before servicing. Steps: Shut off furnace power and gas supply. Locate the flame sensor near the burner assembly. Disconnect the wire and remove the mounting screw. Install the new XPARTCO 62-23543-01 flame sensor. Reconnect the wire, restore power and gas, and test furnace operation. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance & HVAC Parts Supplier 🔄 30-Day Return Policy Restore safe furnace ignition and heating — Add to Cart Now for a reliable, budget-friendly replacement!

Read more less

XPARTCO H150 Furnace Silicon Nitride Rod Ignitor The H150 universal gas furnace igniter come with a 1.95-inch ceramic nitride heating element, a 1.25-inch ceramic insulator, a 304 stainless steel bracket, and a 15.5-inch high temperature resistant wire(20 AWG). Voltage: 120V±10%-15%, 50/60HZ. Power Rating: 150W. Cold resistance: 9-17Ω. At 120V furnace igniter H150 can reach 1200 degrees in a short time The H150 universal furnace igniter replacement can be used in a wide range of machines and is the perfect replacement for silicon carbide ignitors in water heater boilers and gas forced-air furnaces, replacing more than 180 types of ignitors and covering nearly 90% of all applications. Such as stoves, furnace, warm air motion, gas ignition, hot surface igniter, infrared light source, pool heater, boiler, etc California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm Product Description Protect your appliances with the replacement 30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm. This high-quality, fast-acting ceramic cartridge fuse is designed to safeguard circuits in appliances like microwaves, dryers, and HVAC systems by interrupting power during over-current events. With a 30A current rating, 250VAC/125VDC voltage rating, and compact 3AB/3AG (6.35 x 32 mm) size, it offers reliable protection for high-power loads. Constructed with a durable ceramic body for high interrupting ratings, this fuse ensures safety and performance. Note: Includes one fast-blow ceramic fuse; disconnect power before installation. Check appliance manual for compatibility. Replaces part numbers: ABC-30, BK/ABC-30, 0ADEC9300-BE, 0314030.MX52LP, BK-AHC-30-R, BK-AHCF-V-30-R Compatibility: Compatible with appliances including but not limited to: Microwaves: Select GE, Samsung, LG models requiring 30A, 250V fast-blow fuses. Dryers: GE Hotpoint models (e.g., compatible with WE1X21975 assemblies). HVAC Systems: Units using 3AB/3AG 6.35 x 32 mm fast-acting fuses. Other Appliances: Power strips, audio amplifiers, and industrial equipment requiring 30A protection. Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Samsung, LG, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement ceramic fuse, 30A, 250VAC/125VDC, fast-blow, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, 10kA interrupting rating at 125VAC, 3.7 mOhms resistance, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower cost. 🛠️ Easy Installation: Requires fuse holder or clip; typically installed in 5–10 minutes with basic tools. 🛡️ Reliable Fixes: Protects circuits from over-current, preventing appliance damage or failure. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your appliances run safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm Product Description Protect your appliances with the replacement 30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm. This high-quality, fast-acting ceramic cartridge fuse is designed to safeguard circuits in appliances like microwaves, dryers, and HVAC systems by interrupting power during over-current events. With a 30A current rating, 250VAC/125VDC voltage rating, and compact 3AB/3AG (6.35 x 32 mm) size, it offers reliable protection for high-power loads. Constructed with a durable ceramic body for high interrupting ratings, this fuse ensures safety and performance. Note: Includes one fast-blow ceramic fuse; disconnect power before installation. Check appliance manual for compatibility. Replaces part numbers: ABC-30, BK/ABC-30, 0ADEC9300-BE, 0314030.MX52LP, BK-AHC-30-R, BK-AHCF-V-30-R Compatibility: Compatible with appliances including but not limited to: Microwaves: Select GE, Samsung, LG models requiring 30A, 250V fast-blow fuses. Dryers: GE Hotpoint models (e.g., compatible with WE1X21975 assemblies). HVAC Systems: Units using 3AB/3AG 6.35 x 32 mm fast-acting fuses. Other Appliances: Power strips, audio amplifiers, and industrial equipment requiring 30A protection. Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Samsung, LG, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement ceramic fuse, 30A, 250VAC/125VDC, fast-blow, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, 10kA interrupting rating at 125VAC, 3.7 mOhms resistance, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower cost. 🛠️ Easy Installation: Requires fuse holder or clip; typically installed in 5–10 minutes with basic tools. 🛡️ Reliable Fixes: Protects circuits from over-current, preventing appliance damage or failure. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your appliances run safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

ERP LH680014 Gas Furnace Flame Sensor Fits the Specific Carrier Gas Furnace models Replaces Part Numbers:LH680014, LH680012, LH33WZ517, LH33WZ511, LH33WZ515  45 Degree For use with Carrier LH33ZS004 igniter Used on these Bryant & Carrier models: 330AAV, 330JAV, 333BAV, 333JAV, 398AAV, 58DHC, 58DXC, 58PAV, 58SSC, 58SXC, 58TUA and 58WAV   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

SSN4000 Furnace Mini Universal Silicon Nitride Igniter (120v) Universal mini flat silicon nitride igniter kit. Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters Features/Benefits 18 gauge copper high temperature fiberglass insulated lead wires Exact replacement hot surface igniter Faster time to temperature response Higher resistance to oxidation Longer usable life Lower power consumption More robust in transit Stronger more durable design Supco® mini igniters offer an efficient , stronger, reliable hot surface Silicon nitride design Superior gas lighting ability Cross Reference Info: 025-27766-000; 025-27774-000; 025-29043-000; 025-29050-000; 025-30277-000; 025-31801-000; 025-32625-000; 025-32626-000; 025-32638-002; 1001344; 1009604; 1009980; 101344; 101M; 10399; 105141000; 10735002; 10755002; 1096047; 1096048; 11120-100-1402; 11120-100-1403; 11120-100-1405; 11120-100-1407; 11120-100-1408; 11120-100-1409; 1148145; 1148245; 120-07549; 1380654; 1380672; 1380680; 14740511; 14740512; 20015201; 201; 201A; 201D; 201K; 201L; 201M; 201N; 201P; 201R; 201W; 20834; 2400-048; 2400-286; 2600-359; 26789; 271; 271A; 271M; 271N; 271NM; 271P; 271R; 271RS; 271W; 29074; 3079-100; 3200618; 3260618; 33J3701; 3400339P01; 36N77; 373-05342-700; 373-09154-700; 383322B001; 41-1090; 41-402; 41-402N; 41-403; 41-403N; 41-404; 41-404N; 41-405; 41-405N; 41-407; 41-407N; 41-408; 41-408N; 41-409; 41-409N; 41-410; 41-410N; 41-412N; 473-12509-001; 50015; 50018; 511-330-139; 511-330-190; 511-330-193; 526000125; 600915; 62-212868-82; 62-22441-01; 62-22668-93; 62-22868-02; 62374; 626000025; 62821-001; 62821-002; 632-0770; 632-0880; 632-3540; 632-3811; 632245-0; 661924; 661926; 661927; 661928; 6905332; 71082; 75-92-104; 75-92-105; 767A-301; 767A-303; 767A-306; 767A-309; 767A-350; 767A-352; 767A-353; 767A-354; 767A-356; 767A-364; 767A-365; 767A-366; 767A-370; 767A-371; 767A-372; 86483; 902661; 902694; 903758; 90434300; 90436600; 9050; 9302-093; 9302-094; 9330-102; 94851; 96P01; 98P77; 98P78; 99794323; 99794328; B11726-06; B1193939; B12996P01; B138196P01; B1401009; B144676P01; B144676P02; B340039P01; C238; C238-1; C242; FC007; FC024; FC035; FC046; FC050; FC051; FC055; FC067; IGN0030; IGN21; IGN23; IGN26; IGN28; IGN30; IGN34; L37-698; L37-699; L37-700; L37-812; L37-814; L37-815; L37-816; L40-765; LH33ZS001A; LH33ZS002; LH33ZS003; LH33ZS004; RH622286893; WG37X11; WG37X34; ZCO-350   Time to Temperature: <17 seconds @ 120 +/- 1.0 VAC Resistance: 34 - 64 Ohms Minimum Temperature: 2192°F / 1200°C @ 98 Volts Maximum Temperature: 2732°F / 1500°C @ 132 Volts Steady State Current: 0.8 to 2.0 Amps Maximum @ 120 Volts Igniter Material: Silicon Nitride    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less