EXPWE04X10094 Dryer Thermal Fuse  Replaces Part Numbers: WE04X10094, 943856, AH755806, AP3425410, EA755806, PS755806, WE4X10094     This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

134120900 Genuine OEM Dryer Thermal Fuse - Compatible with Frigidaire, Electrolux, Kenmore Product Description Ensure your dryer operates safely with the 134120900 Genuine OEM Dryer Thermal Fuse. This Frigidaire-manufactured thermal limiter, with a 220°F limit, is designed to prevent overheating in select Frigidaire, Electrolux, Kenmore, and other compatible dryers by cutting off power if the dryer exceeds safe temperatures. It addresses issues like the dryer not starting, shutting off too soon, or overheating, ensuring safe and reliable performance. This non-resettable fuse must be replaced if blown. Note: Includes (1) thermal fuse. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: 134120900, 146062-0, 146062-00, 146062-000, 1489053, 3205659, 5303209192, AH419402, EA419402, PD00000113, EAP419402, AP2108182, PS419402. Compatibility: Compatible with select dryer and washer/dryer combo models, including but not limited to: Frigidaire: LEQ1442ES0, FDE436RES0, FDE546RES0, FDE558GES0 Electrolux: EKDR14XAKW0, FFLE1011MW2, FFLE2022MW2, FFLE3911QW0 Kenmore: 417.49012890, 417.49022890, 417.97561601 Crosley: BEQ1442CES0, CDE2000FW0, CDE4000FW0 White-Westinghouse: WDE336RES0 Common models: Frigidaire FDE216RES0, Electrolux FFLE4033QW0, Kenmore 417.97591220 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, and other dryers. 🔧 Specifications: Genuine OEM Frigidaire thermal fuse, 220°F limit, non-resettable. 💪 Reliable Performance: Prevents overheating by cutting power, ensuring safe dryer operation. 🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves dryer not starting, shutting off too soon, overheating, or no heat issues. Product Specification Part Number: 134120900 Component Type: Dryer thermal fuse (thermal limiter) Material: Metal and plastic Operating Conditions: 220°F limit, 125/250V Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running safely today! Add to cart now for a reliable fix!

Read more less

XPARTCO 35001092 – 35001193 Dryer Thermostat Set – Replaces WP35001092, WP35001193 – Compatible with Whirlpool, Maytag & Kenmore Dryers Product Description Restore proper dryer temperature control and safety with the XPARTCO 35001092 – 35001193 Dryer Thermostat Set. This high-quality aftermarket kit includes the operating thermostat and thermal cut-off, designed to regulate heat and protect the dryer from overheating. Failed thermostats can cause no heat, overheating, long dry times, or repeated thermal fuse blowouts. Replacing both components together ensures accurate temperature cycling and safe, reliable dryer operation. Replaces Part Numbers WP35001092, 35001092, 1122485, PD00004704, EAP11741822, AP6008682, PS11741822.  WP35001193, 35001193, 1185515, PD00003365, EAP11741829, AP6008689, PS11741829.  Compatibility This replacement dryer thermostat set fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Estate electric dryers. Example compatible models include (but are not limited to):Whirlpool WED4815EW1Maytag MEDC215EW1Kenmore 110.65132411 Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement Set – Matches OEM heat regulation and safety performance 🌡️ Accurate Temperature Control – Maintains proper drying temperatures 🔥 Overheat Protection – Thermal cut-off prevents unsafe temperature conditions 💰 Cost-Effective Repair – Reliable alternative to OEM thermostat kits 🛡️ Fixes Common Issues – Solves no heat, overheating, long dry times, or blown fuses 📐 Product Specification Part Numbers: 35001092, 35001193 Component Type: Dryer Operating Thermostat & Thermal Cut-Off Set Application: Heater housing / exhaust temperature regulation Material: Heat-resistant metal thermostat bodies Mounting: Screw-mounted Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock. Steps: Disconnect dryer power and remove the rear access panel. Locate the thermostat and thermal cut-off on the heater housing. Disconnect wiring and remove old components. Install the new XPARTCO 35001092 & 35001193 parts in the same positions. Reconnect wiring, reinstall the panel, and restore power. Run a test cycle to confirm proper heating and cycling. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore proper dryer heat control and safety — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

(8 Pack) 3977394 Dryer Thermal Cut-Off Kit – Replaces 3977394 – Compatible with Whirlpool, Kenmore, Maytag, and KitchenAid Dryers Product Description Protect your dryer from overheating with the 3977394 Dryer Thermal Cut-Off Kit. This high-quality aftermarket replacement shuts off the heating element if the dryer temperature rises above safe operating limits. A failed cut-off can cause no-heat issues or overheating during drying cycles. Installing this reliable 3977394 kit restores safe temperature control and helps prevent damage to internal components. Replaces Part Numbers XPTC352, 3977394, 352F Compatibility This replacement thermal cut-off kit fits select Whirlpool, Kenmore, Maytag, Roper, Estate, Crosley, and KitchenAid dryers. Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.86573110, and Maytag MEDC215EW1. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM safety and temperature performance 🔥 Overheat Protection – Automatically shuts off power to the heating element if the dryer overheats 💰 Cost-Effective Fix – Affordable alternative to OEM thermal cut-off kits 🛠️ Easy Installation – Direct-fit design with included thermostats and connectors 🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or shutting off prematurely 📐 Product Specification Part Number: 3977394 Component Type: Dryer Thermal Cut-Off Kit Includes: Thermal cut-off, high-limit thermostat, mounting hardware, and wire connectors Temperature Rating: Cut-off opens at ~352°F. Material: Metal thermostat housing and heat-resistant components Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Nut driver, Phillips screwdriver ⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock. Steps: Disconnect power and remove the rear dryer panel. Locate the heating element housing and identify the cut-off and thermostat. Disconnect wires and remove the old components. Install the new 3977394 cut-off and thermostat in the same locations. Reconnect wires, reassemble the back panel, and restore power. Run a short test cycle to verify proper heating. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your dryer safe and efficient — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

WP3387749 Dryer Genuine OEM Heating Element – Compatible with Whirlpool, Kenmore, Maytag Dryers Product Description Restore your dryer’s heating performance with the WP3387749 Dryer Genuine OEM Heating Element. This factory-approved replacement part generates the heat needed to dry laundry efficiently. A failed heating element may cause your dryer to run but not heat, take longer to dry clothes, or shut down during cycles. Replacing it with this genuine OEM part ensures safe operation and long-lasting performance. Replaces Part Numbers WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418. Compatibility This heating element is compatible with select Whirlpool, Kenmore, Maytag dryers. Example compatible models include (but are not limited to): Whirlpool LER4634EQ2, Kenmore 110.96573220, and Maytag MEDC215EW1. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Wide Compatibility – Fits Whirlpool, Kenmore, Maytag dryers 🔥 Restores Heating – Generates reliable, consistent heat for drying 💰 Cost-Effective OEM Repair – Genuine part ensures durability and performance 🛠️ DIY Friendly – Installs with standard tools in under 30 minutes 🛡️ Fixes Common Issues – Solves no-heat problems, long drying times, or mid-cycle shutdowns 📐 Product Specification Part Number: WP3387749 Component Type: Dryer Heating Element Material: High-temperature resistant metal coil with mounting housing Mounting: Direct replacement heating element assembly Operating Conditions: Designed for residential dryers Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Nut driver, Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the dryer before beginning repairs to prevent electrical shock. Steps: Disconnect power and remove dryer rear access panel. Locate the heating element housing inside the dryer. Disconnect wire terminals and remove screws securing the old element. Slide out defective element and install the new WP3387749. Reconnect wires, secure housing, and reinstall rear panel. Restore power and test dryer heating. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Get your dryer heating again — Add to Cart Now for a safe, factory-approved repair! WP3387749 Dryer Genuine OEM Heating Element Cross Reference Information   Part Number WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418.

Read more less

279311 Genuine OEM Dryer Igniter Kit and Bracket - Compatible with Whirlpool, Maytag, Kenmore Product Description Restore your gas dryer’s heating performance with the 279311 Genuine OEM Dryer Igniter Kit and Bracket. This Whirlpool-manufactured kit includes a silicon carbide igniter, ceramic holder, bracket, wire leads, and plug, designed to ignite the gas burner in select Whirlpool, Maytag, Kenmore, and other compatible gas dryers. It addresses issues like no heat, intermittent heating, or prolonged drying times, ensuring efficient operation. Handle with care, as the igniter is fragile. Note: Includes (1) igniter kit with bracket, wire leads, and plug. Disconnect power and gas supply before installation. Verify compatibility with your dryer model. Replaces part numbers: 279311, 239233, 239300, 239302, 26000279311, 279185, 279311VP, 338899, 338900, 3389895, 340607, 3415, 343128, 41-311, 6-85211, 660991, 685211, 686590, 687399, 691039, 8113, 99912719, AH334180, DE351, DE354, DE363, PD00002344, EAP334180, EA334180, K35-166, AP3094138, PS334180. Compatibility: Compatible with select gas dryer models, including but not limited to: Whirlpool: CG1751XWN0, CG1751XWW0, CG2101XMW0, CG2501XMW0, WGD4910XQ1 Maytag: MGDX655DW, MGDC415YW0, MGD6000BW0 Kenmore: 110.97591420, 110.97591220, 110.97592420 Amana: NGD4655EW0 Roper: RGD4515EW0 Common models: Whirlpool WGD4815EW, Maytag MGD3500FW0, Kenmore 110.97561601 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Roper, and other gas dryers. 🔧 Specifications: Genuine OEM Whirlpool silicon carbide igniter with ceramic holder, bracket, wire leads, and plug. 💪 Reliable Performance: Ignites gas burner for consistent heating, ensuring efficient drying. 🛠️ Easy Installation: Requires a screwdriver, nut driver, and pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves no heat, intermittent heating, thermal fuse tripping, or prolonged drying times. Product Specification Part Number: 279311 Component Type: Gas dryer igniter kit Material: Silicon carbide igniter with ceramic holder and metal bracket Operating Conditions: Suitable for gas dryer burner assemblies, 120V Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source and gas supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer heating efficiently today! Add to cart now for a reliable fix!

Read more less

279457 Dryer Heating Element Wire Kit - Compatible with Whirlpool, Maytag, Kenmore Product Description Restore your dryer’s heating functionality with the 279457 Dryer Heating Element Wire Kit. This high-quality replacement kit is designed for select Whirlpool, Maytag, Kenmore, Amana, Admiral, and Jenn-Air dryers, repairing damaged or burnt wiring connections to the heating element. It ensures reliable heat delivery at a cost-effective price, addressing issues like no heat or inconsistent heating. Note: Includes one high-temperature wires and one wire connector (female spade connectors, 5/16"). Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: 279457, 279457VP, T2502, AP3134638, PS334206. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED4800BQ0, WED4800XQ0, WED4850BW0, WED4900XW0, WED5321SQ0 Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, Estate (verify compatibility with heating element 4391960) Common models: Kenmore 110.60072990, Maytag MEDC400VW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, and Estate dryers. 🔧 Specifications: kit with one high-temperature wires and one wire nuts, 5/16" female spade connectors. 💪 Reliable Performance: Ensures secure electrical connections for consistent heating element operation. 🛠️ Easy Installation: Requires wire cutters, strippers, and screwdriver; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no heat, inconsistent heating, or burnt wire issues. Product Specification Part Number: Choice 279457 Component Type: Dryer heating element wire kit Material: Heat-resistant metal wires, plastic-insulated connectors Connector Type: 5/16" female spade connectors Operating Conditions: Suitable for high-temperature dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer heating efficiently today! Add to cart now for a reliable fix!

Read more less

WE4M255 Dryer Genuine OEM Timer Resistor Replaces: WE4M255, 175D2886P001, 771346, WE04M0255, WE04X10029, WE4X10029, AH267964, EA267964, AP2044425, PS267964. Description: The Timer Resistor is a Genuine OEM part for specific GE dryers. It works in conjunction with the dryer's timer to regulate the duration of the drying cycle, ensuring that clothes are dried for the appropriate amount of time.

Read more less

31001192 Genuine OEM Dryer Cycling Thermostat Replaces Part Numbers: WP31001192, 31001192, 487706, 53-2880, AP6007590, PS11740707.  Description: This Dryer Cycling Thermostat is a Genuine OEM replacement part for Select Maytag, Kenmore, Whirlpool dryer models. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results

Read more less

6931EL3003 CM Dryer High Limit Thermostat 110C/240F Resettable. Fits select LG and Kenmore dryer models. Replaces Part Numbers: 6931EL3003C, AP4457603, PS3530484, 6931EL3003, L3003 Description: This High Limit Thermostat is a replacement part for specific LG dryer models. This safety component is designed to monitor and regulate the dryer's temperature, preventing it from exceeding safe levels. Mounted on the heating chamber or exhaust duct, the high limit thermostat shuts off the heat source or the dryer itself if it detects temperatures that are too high, helping to prevent overheating and potential fire hazards.  This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

279973 Dryer Genuine OEM Thermostat Kit Replaces: 279973, 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, ER279973, AH334387, AP3094323, EA334387, PS334387.  Description: This Thermal Cut-Off Kit is a Genuine OEM part for select Kenmore, Whirlpool dryer models, responsible for protecting the dryer from overheating by interrupting the power flow to the heating element if the dryer air temperature reaches a dangerously high level.  

Read more less

XPARTCO 8573713 Gas Dryer Thermal Cut-Off Fuse Gas Dryer Thermal Cut-Off Fuse   Replaces Part Numbers: WP8573713, 8573713, AP6013467, PS11746693. Description: This Thermal Cut-Off is a replacement part for select Maytag, Whirlpool dryer models. It serves as a crucial safety component, automatically disconnecting power to the dryer's heating element if temperatures rise too high. This protects against overheating that could potentially cause a fire.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less