Washer Parts

XPARTCO MFG63099101 Washer Door Strike – Compatible with LG Washers Product Description Ensure your washer door latches securely with the XPARTCO MFG63099101 Washer Door Strike. This durable aftermarket replacement attaches to the washer door and engages with the door lock assembly, allowing the washer to start and operate safely. Common causes of a bad door strike can include regular wear and tear from frequent use, impact or mishandling that leads to bending or breaking, or issues with the door alignment that cause undue stress on the strike.  Replaces Part Numbers MFG63099101, 2759645, AGF77417823, PD00046132, EAP8752721, AP5787149, PS8752721. Compatibility This replacement door strike fits select LG front-load washers. Example compatible models include (but are not limited to): LG WM3470HWA, WM3370HWA, WM3570HVA, and WM4270HWA. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit, strength, and performance 🚪 Restores Proper Door Latching – Ensures washer can start and lock cycles safely 💰 Cost-Effective Solution – Durable substitute for expensive OEM strikes 🛠️ Easy Installation – Mounts directly to washer door using existing hardware 🛡️ Fixes Common Issues – Solves door-locking errors, cycle interruptions, or washer not starting 📐 Product Specification Part Number: MFG63099101 Component Type: Washer Door Strike Material: High-strength molded plastic Mounting: Screw-in installation using existing door hardware Color: White or off-white (varies by batch) Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock. Steps: Disconnect power to the washer. Open the door and locate the existing door strike. Remove screws securing the damaged strike. Position the new XPARTCO MFG63099101 strike and align mounting holes. Secure with screws, close door, and restore power. Run a short cycle to confirm proper door locking. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore safe and secure washer operation — Add to Cart Now for a quick, reliable fix!

Read more less

Genuine Whirlpool W11244231 Washer Drain Hose - Compatible with Whirlpool, Maytag, Amana, Kenmore Product Description Keep your washer draining smoothly with the Genuine Whirlpool W11244231 Washer Drain Hose. This OEM drain hose is designed for select Whirlpool, Maytag, Amana, and Kenmore washing machines, channeling water from the washer to the drain during wash and rinse cycles. Made of durable corrugated plastic, it prevents leaks, kinks, and clogs, delivering reliable performance as an authentic Whirlpool part. Note: Includes one drain hose with fittings. Disconnect power before installation. Inspect drain pump and connections for debris to ensure optimal performance. Replaces part numbers: W11244231, AP6339776, W10826733, W10221546, 4814009, PS12578897, W10769870, W10821090, W11199768, W11199820, W11203364, W11249137. Compatibility: Compatible with models including but not limited to: Whirlpool: WTW5000DW0, WTW7000DW0, WTW8000DW0, WTW8500DC0 Maytag: MVWC565FW0, MVWB765FW0, MVWB835DW0 Amana: NTW4516FW0, NTW4705EW0 Kenmore: 110.25132411, 110.26132410 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, and Kenmore washing machines. 💧 Specifications: OEM corrugated plastic drain hose. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, and hose clamp; typically installed in 10–20 minutes. 🛡️ Effective Fixes: Resolves leaking, kinking, or clogged drain hose issues. Product Specification Part Number: Genuine Whirlpool W11244231 Component Type: Washer drain hose Material: Corrugated plastic with rubber fittings Mounting: Connects to drain pump and external drain with hose clamp Operating Conditions: Suitable for household washing machine environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer draining efficiently today! Add to cart now for a reliable fix!

Read more less

Genuine Whirlpool WPW10605427 Washer Drain Pump - Compatible with Whirlpool, Maytag, KitchenAid, Amana, Kenmore Product Description Restore your washer’s performance with the Genuine Whirlpool WPW10605427 Washer Drain Pump. This OEM drain pump is designed for select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore washing machines, efficiently circulating and draining water during wash and rinse cycles. It addresses issues like failure to drain, leaking, or unusual noises, delivering reliable performance as an authentic Whirlpool part. Note: Includes one drain pump with electrical connector. Disconnect power before installation. Inspect pump filter and drain hoses for clogs to ensure optimal performance. Replaces part numbers: WPW10605427, WPW10425238, W10425238, W10605427, W10799064, W10799065, W10903216, W10918044, PD00038328, EAP11756700, AP6023357, PS11756700. Compatibility: Compatible with models including but not limited to: Whirlpool: WFW72HEDW0, WFW75HEFW0, WFW90HEFC0, WFW92HEFW0 Maytag: MHW3500FW0, MHW5500FC0, MHW7100DW0 KitchenAid: KSMW1030SS0 Amana, Kenmore: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore washing machines. 💧 Specifications: OEM drain pump, 120V, stainless steel and plastic construction. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, and work gloves; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves failure to drain, leaking, or unusual noises during operation. Product Specification Part Number: Genuine Whirlpool WPW10605427 Component Type: Washer drain pump Material: Stainless steel and plastic Electrical Specs: 120 volts, AC Mounting: Screw-mounted, typically at the bottom rear of the washer Operating Conditions: Suitable for household washing machine environments Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer draining efficiently today! Add to cart now for a reliable fix!

Read more less

XPARTCO W11210459 Washer Water Inlet Valve The XPARTCO W11210459 is an aftermarket replacement washer water inlet valve assembly compatible with select Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, and Roper top-load washers in the WTW4xxx, WTW5xxx, MVWC4xx, MVWC5xx, NTW, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the washer that controls the flow of water from the household supply lines into the washer tub. When the control board calls for water during a fill or rinse cycle, it energizes the valve's solenoid coil to open the valve and allow water to flow in. When the correct water level is reached, the solenoid de-energizes and the valve closes. When the water inlet valve fails, the washer may not fill with water at all, fill too slowly, fill with an incorrect temperature, overfill, or drip water into the tub when it should be closed. This valve assembly directly replaces W10701459, W10838319, W10869799, W11025984, W11038711, W11210459VP, AP6329217, and PS12349267. Installs in 15–20 minutes with basic hand tools. Quick Answer The XPARTCO W11210459 Washer Water Inlet Valve fixes Whirlpool-family top-load washers that won't fill, fill slowly, fill with the wrong water temperature, overfill, or drip water into the tub between cycles. Compatible with Whirlpool WTW4xxx/WTW5xxx, Maytag MVWC4xx/MVWC5xx, Kenmore, Amana NTW, Crosley, Inglis, and Roper top-load washers. Replaces W10701459, W10838319, W10869799, W11025984, W11038711, AP6329217, PS12349267. Common Problems This Part Fixes Washer not filling with water at all when a cycle is started Washer filling very slowly — taking much longer than normal to reach the correct water level Washer filling with only cold water on a warm or hot cycle — or only hot on a cold cycle Washer overfilling or filling continuously — valve stuck open Water dripping or trickling into the tub when the washer is not running Water leaking from the back of the washer near the valve body Washer not advancing past the fill portion of the cycle Replaces Part Numbers This water inlet valve directly replaces the following OEM and cross-reference part numbers: W11210459, W10701459, W10838319, W11038711, 4591321, W10869799, W11025984, 33190189, 33190190, W10423122, W10423124, AWP43369, PD00042885, EAP12349267, AP6329217, PS12349267. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve is compatible with select top-load washers from the following brands and series: Whirlpool top-load washers — WTW4616, WTW4715, WTW4810, WTW4815, WTW4816, WTW4850, WTW4855, WTW4915, WTW4950, WTW4955, WTW5000 series and related models Maytag top-load washers — MVWC215, MVWC415, MVWC416, MVWC465, MVWC555 series and related models Kenmore / Sears top-load washers — 110 series (Whirlpool-built models) Amana top-load washers — NTW4516, NTW4655 series and related models Crosley top-load washers (select models) Inglis top-load washers (select models) Roper top-load washers (select models) Note: Always verify your exact model number before ordering. The W11210459 is a specific-fit valve — not universal. Contact our support team if you need confirmation before ordering. Key Features Solenoid-operated valve — opens and closes on command from the control board to deliver the correct amount of hot and cold water during wash and rinse cycles Complete valve assembly — direct plug-in replacement for compatible models Resolves not-filling, slow-filling, wrong-temperature, overfill, and drip-when-off symptoms Replaces W10701459, W10838319, W10869799, W11025984, W11038711, and AP6329217 Compatible with Whirlpool WTW4xxx/WTW5xxx, Maytag MVWC series, Amana NTW series, Kenmore 110 series, Crosley, Inglis, and Roper top-load washers Top-load washer application — not for Whirlpool front-load models Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 15–20 minutes with basic hand tools Product Specifications Part Number W11210459 Part Type Washer Water Inlet Valve Assembly Condition Aftermarket Replacement Application Top-Load Washers Valve Type Solenoid-operated water inlet valve Compatible Series WTW4xxx, WTW5xxx, MVWC4xx, MVWC5xx, NTW, Kenmore 110 Compatible Brands Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off both the hot and cold water supply valves before beginning. Pull the washer away from the wall to access the back panel. The water inlet valve is mounted on the upper rear of the washer — the external supply hoses connect to the inlet ports and internal hoses route water into the tub. Photograph all wire harness connections and hose routing before disconnecting anything. Use pliers to loosen the hose clamps and disconnect the internal hoses. Unscrew the mounting screws holding the valve to the washer cabinet and disconnect the wire harness. Remove the old valve and install the new W11210459 in the same position. Reconnect the wire harness, internal hoses with clamps, and mounting screws. Reconnect the external supply hoses, restore water and power, then run a fill cycle and check for leaks. Tools needed: Phillips screwdriver, pliers. Frequently Asked Questions What is the difference between the W11210459 and the W10683603 water inlet valves? Both are Whirlpool-platform top-load washer water inlet valves, but they are different assemblies for different model generations and are not interchangeable. The W10683603 (WPW10683603) is a larger dual-valve assembly with an integrated thermistor and vacuum break, used on older Whirlpool-family top-load models. The W11210459 is a newer valve assembly used on more recent Whirlpool WTW4xxx/WTW5xxx and Maytag MVWC series top-load washers. Always use your specific model number to confirm which valve is correct for your washer before ordering. How do I know if the water inlet valve has failed? Common signs of a failed water inlet valve are the washer not filling with water, filling very slowly, filling only on one temperature setting, overfilling, or water dripping into the tub when the washer is off. You can test the valve's solenoid coils with a multimeter — each coil should show a resistance reading (typically 200–500 ohms) rather than open circuit. A coil reading open circuit has failed. Before testing the valve, check that the household water supply is fully open, the fill hoses are not kinked, and the inlet screens inside the valve ports are not clogged with mineral deposits. What are the small screens inside the valve inlet ports for? The small mesh screens inside the hot and cold water inlet ports of the valve are sediment filters that prevent mineral deposits and debris from the household water supply from reaching the valve seats and solenoid mechanisms. Over time — especially in areas with hard water — these screens can become clogged with mineral buildup and restrict water flow, causing the same slow-fill symptoms as a failed valve. Before replacing the valve, remove and inspect the inlet screens. If they are clogged, clean them with a soft brush and white vinegar or replace them. If cleaning the screens does not restore normal fill speed, the valve itself needs replacement. My washer fills with only cold water — is the water inlet valve the cause? Filling with only cold water when a warm or hot cycle is selected usually points to the hot water solenoid coil having failed. Each solenoid controls one temperature port independently — a failed hot coil means only the cold port opens. Test both solenoid coils with a multimeter as described above. Also check that your household hot water supply valve is fully open and that hot water is reaching the back of the washer in the supply hose before assuming the valve has failed. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the specifications and performance of the original W11210459 water inlet valve assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10677723PL Washer Motor Pulley - Compatible with Whirlpool, Maytag, Kenmore, Crosley Washer Motor W10677723 Product Description Restore smooth operation to your washer with the replacement XPARTCO W10677723PL Washer Motor Pulley. This replacement motor pulley is designed for select Whirlpool, Maytag, Kenmore, and Crosley top-load washers, connecting the motor to the transmission for efficient power transfer. It addresses issues like excessive noise, belt slippage, or failure to spin, offering a cost-effective alternative to OEM parts. Note: Includes one motor pulley (2-5/16" diameter, 4 ribs, 5 grooves). Sold individually. Disconnect power before installation. Verify compatibility with your washer model. Replaces Pulley for Motor part numbers: W10677723, 4461547, AP6038394, PS11770267, EAP11770267 Compatibility: Compatible with models including but not limited to: Whirlpool: MVWC565FW0, MVW4505MW0, WTW5010LW0, WTW5015LW0, WTW5057LW0, WTW5100HC0, WTW5100HC1, WTW5100HC2, WTW5100HC3, WTW5100HW0, WTW5100HW2, WTW5100HW3, WTW5105HC0, WTW5105HC1, WTW5105HC2, WTW5105HW0, WTW5105HW1, WTW5105HW2, WTW6120HC0, WTW6120HC1, WTW6120HC2, WTW6120HC3, WTW6120HW0, WTW6120HW1, WTW6120HW2, WTW6120HW3, 8TWTW5010PW0, 8TWTW5057PW0 Maytag: MVWC565FW0, 7MMVWC565FW0, MVW4505MW0, MVW4505MW1, MVW4505MW2, MVW5035MW0, MVW5035MW1, MVW5035MW2, MVW5430MW0, MVW5430MW2, MVW5430PBK0, MVW5435PBK0, MVW5435PW0, MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6200KW3, MVW6230HC0, MVW6230HC1, MVW6230HC2, MVW6230HC3, MVW6230HW0, MVW6230HW1, MVW6230HW2, MVW6230RHW0, MVW6230RHW1, MVW6230RHW2, MVW6230RHW3, MVW6500MBK0, MVW6500MW0, MVWC565FW1, MVWX655DW1 Kenmore: 11022352510, 11022352511, 11021112020, 11021112021, 11031312021, 11031312022 Crosley: CAW42114GW0, CAW42114GW1, CAW45125LW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, and Crosley top-load washers requiring W10677723PL. 🔥 Specifications: Precision-engineered motor pulley, 2-5/16" diameter, 4 ribs, 5 grooves, designed for secure belt engagement and efficient power transfer. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, work gloves, optional pry tool; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves issues like excessive noise, belt slippage, or failure to spin. Product Specification Part Number: XPW10677723PL Component Type: Washer motor pulley Material: Durable plastic with reinforced ribs Terminal Type: Fits motor shaft with locking tabs Operating Conditions: Suitable for high-torque washer environments Compliance: Prop 65 warning for California

Read more less

DC97-19289F Genuine OEM Samsung Washer Drain Pump Assembly The DC97-19289F is a Genuine OEM Samsung replacement washer drain pump assembly compatible with a wide range of Samsung top-load washers in the WA40, WA41, WA42, WA44, WA45, WA48, WA50, WA52, and WA54 series, as well as select Kenmore models built on the Samsung platform. The drain pump removes water from the washer tub during the drain portion of each wash cycle. When the pump fails, the washer will display error codes 5C, SE, nd, 5E, FO2, or E5, leave standing water in the tub, stop mid-cycle, or produce unusual noise during draining. This complete drain pump assembly is rated 120V, 60Hz, 80W, 1.1A with a 30-minute on / 30-minute off duty cycle. It directly replaces DC97-19289A, DC97-19289B, DC97-17349B, DC97-17366A, DC97-17366J, and PX3516-01. Note: the wire plug on the new pump may differ slightly from the original — if the connector does not match your washer's harness, transfer the wiring harness from the old pump to the new one. Installs in 20–30 minutes with basic hand tools. Quick Answer The DC97-19289F Genuine OEM Samsung Washer Drain Pump Assembly fixes Samsung top-load washers displaying error codes 5C, SE, nd, 5E, FO2, or E5, not draining, leaving standing water, or making loud noise during the drain cycle. 120V/60Hz/80W/1.1A, 30 min on/30 min off duty cycle. Compatible with Samsung WA40 through WA54 series and Kenmore (Samsung-built). Replaces DC97-19289A, DC97-19289B, DC97-17349B, DC97-17366A, DC97-17366J, PX3516-01. Note: if wire plug differs, transfer harness from old pump. Common Problems This Part Fixes Error codes 5C, SE, nd, 5E, FO2, or E5 — washer cannot drain within the allotted time Washer not draining — standing water remaining in the tub after a cycle Washer stopping mid-cycle due to a drain fault Loud humming, grinding, or rattling noise during the drain cycle Water draining very slowly — worn pump motor below rated performance Water leaking from the drain pump area at the bottom of the washer Pump running continuously but water not being expelled from the tub Replaces Part Numbers This drain pump directly replaces the following OEM and cross-reference part numbers: DC97-19289F, DC97-17349B, DC97-19289B,DC97-17366A, DC97-17366J, DC97-19289A,ASM772133, AP6806651, EAP12592631, PD00049911, PX3516-01, PS12592631. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump is compatible with select top-load washers from the following brands and series: Samsung top-load washers — WA40 series (WA400PJHDWR and related models) Samsung top-load washers — WA41 series (WA41A3000AW and related models) Samsung top-load washers — WA42 series Samsung top-load washers — WA44 series (WA44A3205AW and related models) Samsung top-load washers — WA45 series (WA45H7000AW, WA45M7050AW, WA45N3050AW, WA45T3200AW and related models) Samsung top-load washers — WA48 series (WA48H7400AW and related models) Samsung top-load washers — WA50 series (WA50F9A7DSP, WA50M7450AW and related models) Samsung top-load washers — WA52 series (WA52M7750AW, WA52M8650AW and related models) Samsung top-load washers — WA54 series (WA54M8750AV and related models) Samsung top-load washers — WA456DRHDSU series Kenmore / Sears top-load washers (select Samsung-built models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Removes water from the tub during the drain and spin cycles for proper washer operation Resolves Samsung error codes 5C, SE, nd, 5E, FO2, and E5 caused by drain pump failure Rated 120V, 60Hz, 80W, 1.1A — correct electrical specifications for compatible Samsung top-load models 30-minute on / 30-minute off duty cycle — matches the operational requirements of compatible models Replaces DC97-19289A, DC97-19289B, DC97-17349B, DC97-17366A, DC97-17366J, and PX3516-01 Wire plug may differ from original — transfer harness from old pump if connector does not match Compatible with Samsung WA40 through WA54 series and Kenmore Samsung-built top-load washers Genuine OEM part manufactured by Samsung to factory specifications — guaranteed fit and performance DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number DC97-19289F Also Replaces DC97-19289A, DC97-19289B (prior versions) Part Type Washer Drain Pump Assembly Condition Genuine OEM Application Samsung Top-Load Washers Voltage 120V AC Frequency 60 Hz Wattage 80W Amperage 1.1A Duty Cycle 30 minutes on / 30 minutes off Error Codes Resolved 5C, SE, nd, 5E, FO2, E5 Connector Note Wire plug may differ — transfer harness from old pump if needed Compatible Brands Samsung, Kenmore (Samsung-built) Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Tilt the washer back or lay it on its side to access the drain pump at the bottom of the machine. Place towels and a shallow pan to catch residual water when the pump is disconnected. Note the wiring connector orientation before disconnecting — take a photo if needed. If the new pump's connector does not match the washer's harness, carefully transfer the wiring harness from the old pump to the new pump. Disconnect the drain hoses from the pump using pliers to loosen the clamps. Unscrew the pump mounting screws and remove the old pump. Install the new DC97-19289F pump in the same position, reconnect drain hoses and secure with clamps, and reconnect the wiring harness. Restore water supply and power, then run a drain cycle to verify proper drainage and check for leaks. Tools needed: Phillips screwdriver, pliers, shallow pan, towels. Frequently Asked Questions What error codes indicate a drain pump failure on Samsung washers? Error codes 5C, SE, nd, 5E, FO2, and E5 on Samsung top-load washers all indicate a drain fault — the washer was unable to drain within the expected time. These codes can also be caused by a clogged drain filter, blocked hose, or kinked drain line, so check those first. If the filter and hose are clear and the error persists after clearing them, the drain pump is the most likely cause. What is the difference between DC97-19289F, DC97-19289A, and DC97-19289B? These are successive revisions of the same Samsung drain pump assembly. DC97-19289A was the original version, DC97-19289B was an update, and DC97-19289F is the current version. Samsung issues revised part numbers when minor production changes are made — all three perform the same function and the DC97-19289F is the correct current replacement for any of the earlier versions. The DC97-17349B, DC97-17366A, and DC97-17366J are additional older cross-references for this pump used on earlier Samsung top-load models. Why might the wire plug on the new pump differ from the original? Samsung revised the wiring connector on this drain pump across different production runs. If the DC97-19289F pump you receive has a different connector than your washer's harness, do not force the connection. Instead, carefully remove the wiring harness from the old pump and transfer it to the new pump — both versions use the same internal terminals and the harness swap is straightforward. This is a known and documented step for this part and does not affect performance or safety. Should I check the drain filter before replacing the pump? Yes — always check and clean the drain filter and inspect the drain hose for kinks or blockages before replacing the pump. A clogged filter or blocked hose can cause the same error codes as a failed pump and clearing the blockage may resolve the problem without needing a new part. On Samsung top-load washers the drain filter is typically located at the bottom front of the machine. If the filter and hose are clear and the error persists, the pump needs replacement. Is this an OEM or aftermarket part? This is a Genuine OEM part manufactured by Samsung to factory specifications. It is the exact same drain pump assembly installed in compatible Samsung and Kenmore top-load washers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WH01X27954 Washer Lid Switch (Old Style) Product Overview The XPARTCO WH01X27954 Washer Lid Switch (Old Style) is designed to restore proper lid detection and washer operation. This high-quality replacement detects whether the washer lid is closed, allowing safe operation during wash and spin cycles. A broken or faulty switch can cause the washer not to start, stop mid-cycle, or fail to spin. Replacing it with this durable XPARTCO switch restores normal functionality and safety performance. Old-style GE lid switch (does not require harness replacement). Quick Answer If your washer will not spin, drain, or start properly, a faulty WH01X27954 lid switch may be the cause. Replacing this old style washer lid switch helps restore normal washer operation and cycle performance. Replaces Part Numbers Replaces OEM part number: WH08X32697, WH01X27954, WH08X31577, WH01X24114, WH01X26114, 290D1580P001, 290D1580P004, 290D1580P002, 290D1580P003, WH08X31577, AP7015047, PS16554755. Compatibility This washer lid switch is compatible with select GE, Hotpoint, and other compatible top-load washers that use the old style lid switch design. Example compatible models include (but are not limited to): GE GTW220ACK1WW GTW220ACK2WW GTW220ACK3WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW330ASK2WW GTW330ASK3WW GTW330ASK4WW GTW330ASKWW GTW335ASN0WW GTW335ASN2WW GTW335ASNWW GTW460AMJ0WW GTW460AMJ1WW GTW460AMJ2WW GTW460AMJ3WW GTW460AMJ4WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW335ASN0WW. GE Top-Load Washers Hotpoint Washers Old Style Lid Switch Applications Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. Common Problems This Part Fixes Washer not spinning Washer not draining Washer not starting cycle Lid switch not detecting closed lid Key Features Designed for old style washer lid switch applications Helps restore safe and proper washer operation High-quality aftermarket replacement Durable construction for reliable performance Product Specifications Part Number: WH01X27954 Part Type: Washer Lid Switch Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Top-Load Washers Style: Old Style Troubleshooting Guide Washer fills but does not spin → Lid switch may be faulty Washer will not start cycle → Lid switch may not detect closed lid Washer stops before spin cycle → Defective lid switch can interrupt operation When Should You Replace This Lid Switch? Replace this lid switch if your washer does not start, spin, or drain properly, or if the switch no longer detects when the lid is closed. Installation Notes ⚠️ Disconnect power before installation. Access the lid switch area according to your washer design and install the replacement securely. Refer to your appliance manual if needed. Related Parts Washer Lid Strike Washer Timer Washer Door or Lid Lock Components Frequently Asked Questions Will this lid switch fit my washer?This switch fits select GE and compatible washers that use the old style lid switch. Always verify your model number. What does a washer lid switch do?It detects whether the washer lid is closed so the machine can operate safely. What are signs of a bad lid switch?Common signs include the washer not spinning, not starting, or stopping before the cycle completes. Is this the old style version?Yes, this listing is for the old style WH01X27954 washer lid switch. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality aftermarket parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

WH23X29553 Washer Genuine Water Valve Fits Specific GE Washer Models. Replaces Part Number WH23X29553, AP6983554, PS12743643. Description: This Water Valve is a Genuine part compatible with specific GE washing machine models. As a key component located inside the washer cabinet, this valve precisely controls the flow of water into the machine during wash cycles. It allows for the filling of the tub with the proper amount of water at the correct temperature per the settings.

Read more less

AHA75673404 Washer Genuine OEM Drain Pump Replaces Part Numbers: AHA75673404, AHA75673402, AGF30196101, AP6978814, PS12748410 Description: This Drain Pump Assembly is a Genuine OEM part compatible with Specific LG washer models. It is responsible for pumping water out of the washing machine during the drain cycle.  

Read more less

383EER3001G Genuine LG OEM Washer Shock Absorber  Fits Specific LG, Kenmore Front Load Washer Models. Replaces Part Numbers: 383EER3001G, 383EER3001A, 383EER3001F, 383EER3001H, 383EER3001K, 383EER3001L, AH3522311, EA3522311, AP4437743, PS3522311. 

Read more less

ERP DC97-16350C Washer Suspension Support Rod - Compatible with Samsung Washers Product Description Stabilize your washer with the replacement DC97-16350C Washer Suspension Support Rod. This replacement suspension rod and spring assembly is designed for select Samsung top-load washers, supporting the washer tub to minimize vibration and noise during operation. It addresses issues like excessive shaking, off-balance drums, or "DC" error codes, offering a cost-effective alternative to OEM parts. Note: Includes one suspension rod and spring assembly (approximately 25.6" long). Sold individually; recommend replacing all four rods for optimal performance. Disconnect power before installation. Verify compatibility with your washer model. Replaces part numbers: DC97-16350C, DC97-16350J, 3282689, DC97-05280K, PD00007282, EAP4221572, AP5623264, PS4221572. Compatibility: Compatible with models including but not limited to: Samsung: WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA422PRHDWR/AA-00, WA422PRHDWR/AA-01, WA422PRHDWR/AA-02, WA45H7000AW/A2, WA45M7050AW/A4 Other brands: Select models requiring DC97-16350C Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung top-load washers requiring DC97-16350C. 🔥 Specifications: Replacement suspension rod and spring assembly, approximately 25.6" long, designed to absorb shock and reduce vibration. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes per rod. 🛡️ Effective Fixes: Resolves excessive shaking, off-balance drums, noise, or "DC" error codes. Product Specification Part Number: DC97-16350C Component Type: Washer suspension support rod and spring assembly Material: Durable ABS plastic and metal with high-tension spring Dimensions: Approximately 25.6" L (rod and spring assembly) Operating Conditions: Suitable for high-vibration washer environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Tools Needed: Phillips screwdriver, work gloves, optional pliers. Process: Access the washer tub, remove the old suspension rod, and install the new one, ensuring secure attachment to the tub and base. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today! Add to cart now for a budget-friendly fix!

Read more less

285852A Washer Heavy Duty Motor Coupler - Compatible with Whirlpool, Kenmore, Maytag, KitchenAid Product Description Ensure your washer runs smoothly with the 285852A Washer Heavy Duty Motor Coupler. This replacement heavy-duty motor coupling is designed as a replacement for select Whirlpool, Kenmore, Maytag, KitchenAid, and other compatible direct-drive top-load washers, offering a cost-effective alternative to the original. It connects the motor to the transmission, transferring rotational force to drive the agitator and drum. This part addresses issues like the washer not agitating or spinning, unusual noises (e.g., grinding or clicking), or stopping mid-cycle, often caused by a worn, cracked, or broken coupler. Note: Includes (1) heavy-duty motor coupler with reinforced rubber and metal inserts. Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: 285852A, 1200184, 280153, 285852, 285852AVP, 3978849, AH1485647, EA1485647, PD00003221, EAP1485647, AP3961972, PS1485647. Compatibility: Compatible with select direct-drive top-load washer models, including but not limited to: Whirlpool: LSR7233EQ0, LSR8233EQ1, LSQ8543JQ1, LSB6300LW0, CAM2742TQ, MAT14PDAWW, CAM2762TQ Kenmore: 110.82822101, 110.82832101, 110.82964100, 110.82980100 Maytag: MAT14PRAWW, MAV4500AWW KitchenAid, Amana, Roper, Inglis, Estate, Admiral, Magic Chef, Crosley, Norge: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Inglis, Estate, Admiral, Magic Chef, Crosley, and Norge direct-drive top-load washers. 🔧 Specifications: Heavy-duty rubber with metal inserts. 💪 Reliable Performance: Transfers rotational force for consistent agitation and spinning, with enhanced durability over standard couplers. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no agitation/spinning, unusual noises, or mid-cycle stopping. Product Specification Part Number: 285852A Component Type: Washer heavy-duty motor coupler Material: Rubber with metal inserts; some versions use 5-ply recycled tire rubber  Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running efficiently today! Add to cart now for a reliable fix!

Read more less