Washer Parts

XPARTCO 131763310 Washer Door Striker The XPARTCO 131763310 is an aftermarket replacement door striker (also called a door strike or door catch) compatible with select Frigidaire, Kenmore, Electrolux, Crosley, Gibson, White-Westinghouse, Kelvinator, and Tappan front-load washers. The door striker is a small plastic tab mounted on the washer door that engages with the door lock assembly on the front of the washer when the door is closed — activating the door switch and allowing the washer to start, fill, and spin. When the striker breaks or wears down, the door will not properly activate the door lock, causing the washer not to start, not to fill, or to display a door-related error code. Made from durable white plastic, this striker measures approximately 1-1/4" L x 9/16" W x 2-9/16" H with approximately 2 inches between mounting holes (center to center). It directly replaces 131763300, 134456600, 1032664, LP3310, AP3580441, and several additional cross-reference numbers. Sold individually. Installs in under 15 minutes with a Phillips screwdriver. Quick Answer The XPARTCO 131763310 Washer Door Striker fixes Frigidaire-platform front-load washers where the door won't activate the door lock, the washer won't start, won't fill, leaks from the door, or shows a door-related error code. White plastic, approx. 1-1/4" L x 9/16" W x 2-9/16" H, ~2" between mounting holes. Sold individually. Phillips screwdriver only — installs in under 15 minutes. Compatible with Frigidaire, Kenmore, Electrolux, Crosley, Gibson, and more. Common Problems This Part Fixes Washer door will not properly latch or activate the door lock when closed Washer will not start — door switch not being triggered by the striker Washer will not fill with water — door lock not engaged Washer will not spin — door lock fault preventing cycle completion Water leaking from the door area due to door not sealing properly Door-related error codes displayed on compatible models Broken, cracked, or missing door striker visible on the washer door Replaces Part Numbers This door striker directly replaces the following OEM and cross-reference part numbers: 131763310, 134456600, 131763302, 1032664, 131763300, AH890617, EA890617, AP3580441, PS890617, AFR14210, PD00000391, EAP2378364, AP4508273, PS2378364, WH10X10004, 824421, AH269392, EA269392, AP2621447, PS269392. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door striker is compatible with select front-load washers from the following brands: Frigidaire front-load washers (ATF, ATFB, BLTF, GLTF, LTF, FTF, FAFW, FRFW series and more) Kenmore / Sears front-load washers (select Frigidaire-built models) Electrolux front-load washers (select models) Crosley front-load washers (CFW, CLCE series) Gibson front-load washers (GTF series) White-Westinghouse front-load washers Kelvinator front-load washers Tappan front-load washers Note: The 131763310 (white) and 131763302 (gray) are interchangeable and functionally identical — the only difference is color. Either part will work as a replacement regardless of which color was originally installed. Key Features Engages with the door lock assembly to activate the door switch, allowing the washer to start, fill, and run Critical safety component — washer will not operate without a properly functioning door striker Durable white plastic construction — strong and wear-resistant for long service life Dimensions: approx. 1-1/4" L x 9/16" W x 2-9/16" H; ~2" between mounting holes (center to center) Sold individually — one striker per order Direct replacement for 131763300, 134456600, 1032664, and LP3310 Compatible with Frigidaire, Kenmore, Electrolux, Crosley, Gibson, White-Westinghouse, Kelvinator, and Tappan washers Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in under 15 minutes with a Phillips screwdriver only Product Specifications Part Number 131763310 Part Type Washer Door Striker (Door Strike / Door Catch) Condition Aftermarket Replacement Application Front-Load Washers Dimensions Approx. 1-1/4" L x 9/16" W x 2-9/16" H Mounting Hole Spacing Approx. 2" center to center Color White Material Plastic Sold As Single striker Compatible Brands Frigidaire, Kenmore, Electrolux, Crosley, Gibson, White-Westinghouse, Kelvinator, Tappan Installation Notes ⚠️ Unplug Washer Before Starting Disconnect power before beginning any repair. Open the washer door and locate the door striker — it is the small plastic tab mounted on the inside of the door, typically near the top or center of the door panel. Remove the two Phillips screws securing the old striker to the door. If the striker is broken, the screws may already be loose or missing. Align the new 131763310 striker with the mounting holes in the door and secure it with the two Phillips screws. Close the door to confirm it clicks firmly into the door lock assembly. Restore power and run a short cycle to verify the washer starts, fills, and runs normally. Tools needed: Phillips screwdriver only. Frequently Asked Questions What does the washer door striker do? The door striker is the small plastic tab on the washer door that engages with the door lock assembly mounted on the front of the washer when the door is closed. As the door closes, the striker pushes into the door lock, activating the door switch — a signal to the control board that the door is securely closed. The washer will not start, fill, or spin unless the door switch is activated by the striker. A broken or worn striker means the door lock is never properly engaged, so the washer appears to be in a constant "door open" state even when the door is physically shut. What is the difference between the 131763310 and 131763302 door strikers? Both are Frigidaire-platform door strikers, they are different color and interchangeable. The 131763310 is used on older Frigidaire front-load washer models (ATF, GLTF, FAFW series and others). The 131763302 is a gray color used on newer Frigidaire and Electrolux models. Always compare your existing striker's shape and dimensions to confirm, or contact our support team with your model number. Should I also replace the door lock assembly when replacing the striker? Not necessarily — in most cases the striker is the only part that needs replacement. The striker is a small plastic tab that takes repeated impact every time the door is closed, making it the most commonly worn part in the door latch system. The door lock assembly (131763202) is more durable and less prone to failure. Inspect the door lock for any cracks, burn marks, or a latch that does not spring back after pressing — if it appears damaged, replace it as well. If the lock looks intact, the 131763310 striker alone should resolve the issue. My washer door closes but the washer still won't start — is it the striker? It may be. If the striker is cracked, worn, or broken, it may appear to engage the door lock but not push far enough into the lock assembly to fully activate the door switch. In other cases, a fully intact striker may not be the cause — the door lock assembly itself (131763202) or the door latch on the frame side may also be the culprit. Visually inspect the striker first — if it is visibly broken, replace it. If it appears intact, the issue may be with the door lock assembly or wiring. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured from durable plastic to match the dimensions and function of the original 131763310 door striker. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

XPARTCO W11266654 Washer Door Boot Outer Clamp Description: The Outer Door Boot Seal Clamp Washer is a replacement part specific to Whirlpool-brand washing machines. Multiple washers are used behind the outer boot seal clamp to create a uniform, compressed seal around the washer door opening.  Replaces Part Number: W11266654, W10237503, WPW10237503, 4894886, AP6809210, PS12584490, W10818945.    

Read more less

XPARTCO DC62-30314V Washer Water Valve – Compatible with Samsung & Kenmore Washers Product Description Restore proper water filling and reliable washer performance with the XPARTCO DC62-30314V Washer Water Valve. This high-quality aftermarket replacement precisely controls hot and cold water flow into the washer during fill cycles. A faulty inlet valve can cause no-fill issues, slow filling, water leaks, or error codes. Replacing it with this durable XPARTCO valve helps restore correct water pressure and dependable wash operation. Replaces Part Numbers DC62-30314V, PD00054103, EAP11719664, AP5966634, 3992464, PS11719664. Compatibility This replacement washer water inlet valve fits select Samsung and Kenmore (Samsung-manufactured) washers. Example compatible models include (but are not limited to):Samsung WF45R6100AW, WF42H5000AWKenmore 592.49045, 592.49303 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit and water-flow performance 💧 Accurate Water Control – Ensures proper filling during wash cycles 🔧 Durable Solenoid Design – Built for consistent operation and long service life 💰 Cost-Effective Repair – Reliable alternative to OEM pricing 🛡️ Fixes Common Issues – Resolves no-fill, slow fill, leaks, or water inlet errors 📐 Product Specification Part Number: DC62-30314V Component Type: Washer Water Inlet Valve Voltage: 120V AC Water Connections: Hot & Cold Material: Reinforced plastic body with metal solenoids Mounting: Rear cabinet direct-fit Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, towel or shallow pan ⚠️ Safety First: Unplug the washer and shut off the water supply before servicing. Steps: Disconnect power and turn off water supply. Remove the rear access panel. Disconnect inlet hoses and wiring harness. Remove mounting screws and take out the old valve. Install the new XPARTCO DC62-30314V valve and secure it. Reconnect hoses and wiring, restore water and power, and test for leaks. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore proper washer filling and dependable performance — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPARTCO EAU64082901 Washer Drain Pump Motor – for AHA75693425 – Compatible with LG & Kenmore Washers Product Description Restore proper draining and reliable washer operation with the XPARTCO EAU64082901 Washer Drain Pump Motor. This high-quality replacement pumps water out of the washer tub during drain and spin cycles. A failing drain pump motor can cause water not draining, standing water, slow spin cycles, or drain error codes. Replacing it with this dependable XPARTCO pump motor ensures efficient water removal and smooth washer performance. Replaces Part Numbers EAU64082901, PD00090792, AP6336279. EAP12750085. Replacement Motor for Drain pump Assembly for AHA75693425, PD00068706, EAP12750085, AP6978815, PS12750085 Compatibility This replacement washer drain pump motor fits select LG and Kenmore (LG-manufactured) front-load and top-load washers. Example compatible models include (but are not limited to):LG WM2277HW, WM2455HW, WM3470HWAKenmore 796.40272900, 796.41472210 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM flow rate and electrical performance 💧 Efficient Water Drainage – Removes water quickly during drain and spin cycles 🔇 Quiet Operation – Smooth motor design minimizes noise and vibration 💪 Durable Construction – Built for long service life in wet environments 🛡️ Fixes Common Issues – Solves washer not draining, water left in tub, or drain error codes 📐 Product Specification Part Number: EAU64082901 Component Type: Washer Drain Pump Motor only Voltage: 26V Mounting: Direct-fit pump housing installation Connection: Electrical terminals with hose ports Application: Drain and spin water removal Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, towel or shallow pan ⚠️ Safety First: Unplug the washer and turn off water supply before servicing. Steps: Disconnect power and water supply. Access the drain pump from the front or bottom panel. Place a towel to catch residual water. Disconnect hoses and wiring from the old pump motor. Install the new XPARTCO EAU64082901 pump motor. Reconnect hoses and wiring, reassemble panels, and restore power. Run a test drain cycle to confirm proper operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore proper washer draining and avoid costly water issues — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

DC66-00777A Washer Genuine OEM Pulsator Cap – Compatible with Samsung Washers Product Description Keep your washer performing like new with the DC66-00777A Washer Genuine OEM Pulsator Cap. This factory-approved cap covers the central bolt on the pulsator (washplate), preventing water, detergent, and debris from entering the hub assembly. A missing or cracked cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this Genuine OEM part ensures a perfect fit, watertight seal, and long-lasting protection. Replaces Part Numbers DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312. Compatibility This Genuine OEM pulsator cap fits select Samsung top-load washers. Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, WA45H7000AW/A2, and WA50M7450AW/A4. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-approved part ensures perfect fit and reliable performance 💧 Protective Design – Seals the washplate bolt area to prevent leaks and corrosion 🔇 Reduces Noise – Helps maintain balanced, quiet spin cycles 🛠️ Tool-Free Installation – Snaps securely into place in seconds 🛡️ Fixes Common Issues – Replaces missing, cracked, or leaking pulsator caps 📐 Product Specification Part Number: DC66-00777A Component Type: Washer Pulsator (Washplate) Cap Material: High-grade molded plastic Color: Silver or gray finish (varies by model) Mounting: Snap-fit installation over pulsator bolt Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Always unplug the washer before performing any maintenance to prevent electrical shock. Steps: Open the washer lid and locate the pulsator (washplate) center. Remove any old or damaged cap remnants. Align the new DC66-00777A cap with the bolt opening. Press firmly until it clicks securely into place. Close the lid and test the washer. ⏱️ Time Required: Less than 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Protect your washer from moisture and debris — Add to Cart Now for a perfect, factory-quality fit!

Read more less

XPARTCO W10876600 Washer Drain Pump – Compatible with Whirlpool, Maytag, Amana, and Crosley Washers Product Description Restore reliable draining performance with the XPARTCO W10876600 Washer Drain Pump. This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed. Replacing it with this durable pump ensures smooth water removal and dependable washer operation at a fraction of the OEM cost. Replaces Part Numbers W10876600, 4455877, W10727777, W10876600VP, PD00034529, EAP11738156, AP6004933, PS11738156. Compatibility This replacement drain pump fits select Whirlpool, Maytag, Amana, and Crosley top-load and front-load washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC565FW0, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM performance standards 💧 Efficient Water Removal – Pumps out water quickly and quietly during drain cycles 💰 Budget-Friendly Solution – High-quality alternative to expensive OEM parts 🛠️ DIY Installation – Plug-and-play design for easy home repair 🛡️ Fixes Common Issues – Solves washer not draining, “F9E1” or “SD” error codes, and standing water problems 📐 Product Specification Part Number: W10876600 Component Type: Washer Drain Pump Assembly Material: Reinforced plastic housing with electric motor Voltage: 120V AC Mounting: Direct-fit replacement on washer base Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Nut driver, pliers, towel or bucket ⚠️ Safety First: Always unplug the washer and disconnect water supply before performing any repairs to prevent electrical shock or leaks. Steps: Disconnect power and water hoses. Tilt the washer back or remove the front access panel. Disconnect the wiring harness and hose clamps. Remove the old drain pump and install the new W10876600 pump. Reconnect hoses and wiring, secure the pump, and reassemble the panel. Restore power and run a drain or rinse cycle to confirm proper operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer drainage issues quickly — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPARTCO W11130359 Washer Suspension Rod Kit – Compatible with Whirlpool, Maytag, Amana, Crosley, and Roper Washers Product Description Reduce vibration and restore smooth, stable operation with the XPARTCO W11130359 Washer Suspension Rod Kit. This high-quality aftermarket replacement supports the washer tub and absorbs movement during wash and spin cycles. Worn or broken suspension rods can cause loud banging noises, excessive shaking, or unbalanced loads. Replacing them with this reliable XPARTCO kit ensures balanced performance and extends the life of your washer. Replaces Part Numbers W11130359, W11027215, 4813873, W10594082, W10785954, W10821704, W10901060, W11033536, W11226784, AP6261901, PD00042502, EAP12347544, PS12347544. Compatibility This replacement suspension rod kit fits select Whirlpool, Maytag, Amana, Crosley, and Roper top-load washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC565FW0, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to match OEM performance and stability 🌀 Reduces Vibration – Keeps washer tub balanced during spin cycles 💰 Cost-Effective Solution – High-quality kit at a lower cost than OEM parts 🛠️ Complete Kit – Includes four suspension rods, bushings, and suspension springs 🛡️ Fixes Common Issues – Solves excessive shaking, banging, or unbalanced load problems 📐 Product Specification Part Number: W11130359 Component Type: Washer Suspension Rod Kit Includes: 4 suspension rods with springs and mounting bushings Material: Heavy-duty steel with corrosion-resistant coating Mounting: Direct-fit installation under washer tub Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, socket wrench ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock or injury. Steps: Disconnect power and remove the washer lid or top panel. Support the washer tub with a sturdy object or strap. Remove the old suspension rods from their mounting holes. Install the new XPARTCO W11130359 rods one by one, attaching springs and bushings. Reassemble panels, plug in the washer, and run a test cycle to confirm smooth operation. ⏱️ Time Required: 30–40 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Eliminate noise and vibration — Add to Cart Now for a stable, long-lasting repair!

Read more less

W11458345 Genuine OEM Washer Drain Pump - Compatible with Whirlpool, Maytag, Amana Product Description Restore your washer’s performance with the W11458345 Genuine OEM Washer Drain Pump. This Whirlpool-manufactured pump is designed as a replacement for select Whirlpool, Maytag, Amana, Inglis, and Kenmore washing machines. It efficiently drains wastewater during wash cycles and includes a large filter that can be cleaned monthly with Washing Machine Cleaner Tablets. This part addresses issues like water not draining, loud buzzing or grinding noises, or failure to enter agitation cycles, often caused by blockages, wear, or pump motor failure. Note: Includes (1) drain pump assembly. Disconnect power before installation. Verify compatibility with your washer model. Replaces part numbers: W11458345, W11316609, W10918608, W11319789, PD00062450, EAP16218041, AP6989186, PS16218041. Compatibility: Compatible with select washer models, including but not limited to: Whirlpool: WFW862CHC3, WFW6620HW1, WFW6620HW2, WFW9620HC2, 8TWFW8620HW1 Maytag: MHW5630HW1, MHW5630HW3, 7MWFW5622HW2 Amana: NFW5800HW0 Kenmore: 110.42932200 Inglis: IFW5900HW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, and Kenmore washers. 🔧 Specifications: Genuine OEM Whirlpool drain pump, 120V, stainless steel construction. 💪 Reliable Performance: Efficiently drains wastewater for optimal washer operation. 🛠️ Easy Installation: Requires screwdriver, pliers, and nut driver; typically installed in 30–60 minutes. 🛡️ Effective Fixes: Resolves water not draining, buzzing/grinding noises, or agitation cycle issues. Product Specification Part Number: W11458345 Component Type: Washer drain pump assembly Material: Stainless steel and plastic (Based on web:0, web:1, web:2, web:3, web:4, web:5, web:6, web:7, web:8, web:9, web:10, web:11, web:12, web:13, web:14, web:15) Dimensions: Approximately 9.75" L x 9.5" W x 5.25" H (Based on web:0) Weight: 3.32 lbs (Based on web:0) Electrical Specs: 120V, submersible design (Based on web:0, web:2) Compliance: UL-listed, Prop 65 warning for California (Based on web:0, web:1, web:2, web:3, web:4, web:5, web:6, web:7, web:8, web:9, web:10, web:11, web:12, web:13, web:14, web:15) Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

Genuine Whirlpool 8212546RP Washer Fill Hoses 2-Pack 4 Feet - Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Kenmore Product Description Ensure reliable water supply for your washer with the Genuine Whirlpool 8212546RP Washer Fill Hoses 2-Pack. These OEM 4-foot black rubber hoses are designed for Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore washing machines, delivering hot and cold water with anti-corrosive brass couplings and pre-installed high-quality EPDM washers. With a 1050 PSI burst strength, they prevent leaks and ensure consistent water flow, addressing issues like leaking, low water flow, or hose failure. Note: Includes two 4-foot hoses with built-in O-rings. Disconnect power and water supply before installation. Replace hoses every 5 years to reduce the risk of failure. Replaces part numbers: 8212546RP, AP3885155, 1178876, 49535, 8212546IP, 8212546RW, PS1156134. Compatibility: Compatible with models including but not limited to: Whirlpool: WFW72HEDW0, WFW75HEFW0, WFW90HEFC0, WTW5000DW0 Maytag: MHW3500FW0, MHW5500FC0, MVWC565FW0, MVWB835DW0 KitchenAid: KSMW1030SS0 Jenn-Air, Amana, Kenmore: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore washing machines. 💧 Specifications: OEM 4-foot black rubber hoses with brass couplings, 1050 PSI burst strength, and EPDM washers. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability and leak-free operation. 🛠️ Easy Installation: Requires pliers and work gloves; typically installed in 10–15 minutes. 🛡️ Effective Fixes: Resolves leaking, low water flow, or hose failure issues. Product Specification Part Number: Genuine Whirlpool 8212546RP Component Type: Washer fill hoses (2-pack) Material: Black rubber with brass couplings, EPDM washers Dimensions: 4 ft. length. Mounting: 3/4" male and female connections with built-in O-rings Operating Conditions: Suitable for hot and cold water in household washing machine environments Compliance: Exceeds IAPMO, CSA, ANSI, IEC 61770, and RMA standards; Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and turn off hot and cold water supplies before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer running efficiently today! Add to cart now for a reliable fix!

Read more less

XPARTCO DC96-01703H Washer Water Pressure Switch - Compatible with Samsung Washers Product Description Ensure your Samsung washer operates flawlessly with the replacement DC96-01703H Washer Water Pressure Switch. This replacement part is designed for select Samsung washing machines, providing precise water level control to prevent overfilling, underfilling, or water leakage. It resolves issues like error codes, inconsistent water levels, or failure to start wash cycles, delivering reliable performance for your appliance. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: DC96-01703H, PD00030634, EAP8764044, AP5799898, 3997570, PS8764044. Compatibility: Compatible with models including but not limited to: Samsung: WA48J7700AW/A2, WA48H7400AW/A2, WA50F9A7DSP/A2, WA52M7750AV/A4, WA56H9000AP/A2 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Samsung washing machines. 🔥 Specifications: Water pressure switch with electrical connectors and 28" hose attachment. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 10–15 minutes. 🛡️ Effective Fixes: Resolves water level issues, error codes, and improper filling. Product Specification Part Number: XPDC96-01703H Component Type: Washer water pressure switch Mounting: Secures to washer control panel with screws or clips Operating Conditions: Suitable for washer environments Installation Notes: Safety First: Disconnect the washer from power and water sources before installation. Follow the owner’s manual for guidance. Shop for high-quality replacement appliance parts with a 30-day return policy. Fix your washer today! Add to cart now for a reliable solution!

Read more less