DC97-16350U Washer Suspension Rod Kit Suspension Kit (Set of 4)  26.5" overall length, set of 4. Fits Specific Samsung top-load washers. Replaces Part Numbers: DC97-16350U, AP6884450, PS12720841. Description: This Washer Suspension Damper is designed to provide stability and reduce excessive vibration in your washer. This replacement part ensures a secure fit with compatible Samsung washer models, helping to maintain smooth operation during each cycle. By replacing a worn or damaged damper, you can prevent unnecessary wear and tear on your appliance, extending its lifespan and improving performance.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

AJU73213301CM Washer Water Valve 12V DC, five coil valve. Fits specific Kenmore, LG top load washer models. Also replaces 5221EA1008F and AJU75152601 Replaces part Numbers: 5221EA1008F, AJU73213301, AJU75152601, AH3527446, AJU75152603, EA3527446, PS3527446, AP6308239, PS12374721, TAW35618287. Description: This Water Inlet Valve is a replacement part for select Kenmore, LG washing machine models. It is designed to regulate the flow of water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board or Timer, ensuring the right amount of cold water is provided.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 4681EA2001T Washer Drain Pump Motor - Compatible with LG, Kenmore Washers Product Description Restore efficient drainage with the replacement XPARTCO 4681EA2001T Washer Drain Pump Motor. This replacement drain pump motor is designed for select LG and Kenmore front-load washers, removing water at the end of the wash cycle to ensure clothes are ready for drying. It addresses issues like water not draining, noisy operation, leaks, or cycle interruptions, offering a cost-effective alternative to OEM parts. Note: Includes one drain pump motor with impeller; reuse existing pump housing. Disconnect power and water supply before installation. Check pump housing and drain hose for clogs to prevent repeat issues. Replaces part numbers: 4681EA2001T, 4681EA1007G, 2003273, 4681EA1007D, 4681EA2001D, 4681EA2001N, 4681EA2001U, AH3579318, EA3579318, PD00001722, EAP3579318, AP5328388, PS3579318. Compatibility: Compatible with models including but not limited to: LG: WM2650HRA, WM8000HVA, WM2101HW, WM3270CW, WM3431HS, WM3770HVA, WM2075CW, WM2016CW, WM2801HLA Kenmore: 79641072310, Select front-load models requiring 4681EA2001T Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG and Kenmore front-load washers. 💧 Specifications: replacement drain pump motor, 120V–127V, 60Hz, 85W, 1.4A, 45L/min. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes. 🛡️ Effective Fixes: Resolves water not draining, noisy cycles, leaks, or cycle interruptions. Product Specification Part Number: XPARTCO 4681EA2001T Component Type: Washer drain pump motor Material: Plastic and metal Electrical Specs: 120V–127V, 60Hz, 85W, 1.4A, 45L/min flow rate Mounting: Mounts to existing pump housing, includes impeller (not sold separately) Operating Conditions: Suitable for high-humidity washer environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer draining efficiently today! Add to cart now for a budget-friendly fix!

Read more less

ERP 285753A Washer Motor Coupler Replaces Part Numbers: 285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AH1485646, EA1485646, ER285753, OEM15855574, AP3963893, PS1485646, TJ285753.  Description This Direct Drive Washer Motor Coupling is a replacement part for specific Direct Drive Kenmore, Roper Whirlpool washer models. It is responsible for connecting the motor to the transmission, allowing the washer to agitate and spin the clothes during the wash and spin cycles. A bad motor coupling can be caused by prolonged use, heavy loads, or overloading the washer. It can also wear out or break over time due to normal usage. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

3363394CM Washer Drain Pump Replaces Part Number: WP3363394, 3363394, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 62516, 63347, 64076, 8235, AP6008107, PS11741239 Direct Drive Washer Drain Pump for Whirlpool, Kenmore, Roper, Estate, Kirkland, and many more  This pump fits most direct drive washers. The pump outlet is about 1 1/4". Description: This Direct Drive Washer Pump is a replacement part for specific direct drive Kenmore, Maytag, Whirlpool washing machine models. It is responsible for pumping water out of the washer during the drain cycle, ensuring that the washing machine drains efficiently after each wash.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

ERP W11096267 Washer Water Valve Replaces Part Numbers: W11165546, W10839828, 4545980, W10599423, W10758828, W11096267, W11165546VP, AP6284346, PS12348013. 120V, 60Hz, four coil valve. Fits select Maytag, Whirlpool top load washer models. Description: This Valve is a replacement part for specific Maytag, Whirlpool washing machine models. This component controls the flow of water into the washing machine during the fill cycle, ensuring that the proper amount of water enters the machine based on the selected settings. The valve is crucial for regulating water levels and maintaining the efficiency and effectiveness of the washing process.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W10810403 Washer Lid Switch Assembly – Replacement for Whirlpool, Maytag, Kenmore Washers 🧺 Product Overview Restore your washer’s performance with the W10810403 Washer Lid Switch Assembly — a high-quality replacement part designed to fix top-load washers that won’t start, spin, or drain. This lid switch ensures the washer detects when the lid is properly closed, allowing safe and smooth operation of the wash cycle. This Washer Lid Latch Assembly is a reliable replacement part. This part locks the door during the operation of the washing machine. The Lid Latch Assembly can also be used on specific Whirlpool, Maytag, Amana, Kenmore Washer models. 🔧 Key Features 🪛 direct replacement for part number W10810403 ♻️ Replaces: W10810403, W10648012, W10787878, AP5984435, PS11722981 🚫 Fixes issues: washer won’t spin, start, or drain 🛡️ Built tough to meet or exceed OEM specs 🧰 Easy DIY installation with standard tools 🏷️ Compatible Brands Whirlpool Maytag Kenmore Amana Roper Estate 💡 Tip: Always verify your washer’s model number to confirm compatibility. 💡 Why Buy from Parts-O-Matic 🚚 Fast U.S. shipping 🛠️ Specialists in appliance replacement parts ✅ 100% satisfaction guarantee 🧑🔧 Trusted by DIYers and repair pros

Read more less

ERP 3949247 Washer Lid Switch Replaces Part Numbers: 3949247V, 3949247, 3949237, 3949239, 3949240, 3949247VP, 4248251, TJ90ES247, AP3100003, ES247, AP5983746, PS11722098.    Description: The Washer Lid Switch is a replacement part for specific Whirlpool, Kenmore top load washer models. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle, Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less