Washer Parts

638 products

  • Sale -31%Last stock! WP3363394 Genuine OEM Washer Drain Pump  Parts-O-Matic

    Whirlpool WP3363394 Genuine OEM Washer Drain Pump

    WP3363394 Genuine OEM Washer Drain Pump  Direct Drive Washer Drain Pump for Whirlpool, Kenmore, Roper, Estate, Kirkland, and many more  Replaces Part Number: 3363394, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 62516, 63347, 64076, 8235, AP6008107, PS11741239. This pump fits most direct drive washers. The pump outlet is about 1 1/4". The pump comes fully-boxed, brand new, in its original packaging.    

    $72.00 $49.80

  • Sale -44%Last stock! 6501KW2001A Washer Rotor Positioning Sensor - front

    XPARTCO XPARTCO 6501KW2001A Washer Rotor Positioning Sensor

    XPARTCO 6501KW2001A Washer Rotor Positioning Sensor – Compatible with LG and Kenmore Washers Product Description Restore accurate motor control and spin performance with the XPARTCO 6501KW2001A Washer Rotor Positioning Sensor. This Sensor Assembly, also known as a hall sensor is a replacement Part and is a vital component in Specific LG, Kenmore washer Models. This part monitors the direction and speed of the spinning rotor. It then communicates this information to the electronic control board. By doing so, it aids in the precise operation of your washer. If your washer pumps but fails to spin or agitate, it may be indicative of a damaged sensor assembly. Replaces Part Numbers 6501KW2001A, 6501KW2001D, PD00001726, EAP2497738, 6501KW2001C, EBR37560301, AP4457567, PS3529185.  Compatibility This replacement rotor positioning sensor fits select LG and Kenmore front-load washers. Example compatible models include (but are not limited to): LG WM2101HW, LG WM2487HRM, and Kenmore 796.40272900. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM performance and accuracy ⚙️ Precise Motor Feedback – Helps control drum rotation and spin speed 💰 Cost-Effective Solution – High-quality alternative to OEM sensor assembly 🛠️ Easy Installation – Plug-and-play design with secure connector fit 🛡️ Fixes Common Issues – Resolves LE, UE, or spin-related error codes 📐 Product Specification Part Number: 6501KW2001A Component Type: Washer Rotor Position Sensor (Hall Sensor) Material: High-durability circuit board and plastic housing Mounting: Direct-fit replacement on motor stator assembly Operating Conditions: Designed for high-humidity washer environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: 10mm socket wrench, Phillips screwdriver ⚠️ Safety First: Always unplug the washer before performing any repairs to prevent electrical shock. Steps: Disconnect power and remove the rear access panel. Remove the rotor bolt and pull off the rotor assembly. Locate and disconnect the wiring harness from the old sensor. Remove the old 6501KW2001A sensor and install the new XPARTCO replacement. Reconnect wiring, reinstall the rotor, and secure the rear panel. Restore power and run a spin test to verify repair. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer spin and motor issues — Add to Cart Now for a reliable, budget-friendly repair!

    $23.00 $12.99

  • Sale -53% 22004333CM Washer Water Valve Replaces WP22004333  Parts-O-Matic

    Choice Manufactured Parts 22004333CM Washer Water Valve Replaces WP22004333

    22004333CM Washer Water Valve 120V, 50/60Hz, dural coil, GHT inlet, barb outlet. Fits Maytag top load washers. Replaces Part Numbers:WP22004333, 22004333, 22004191, AP6006446, PS11739520.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

    $74.00 $35.00

  • Sale -37% W10440786CM Washer Suspension Rod Kit (Pack of 4) Replaces W10440786  Parts-O-Matic

    Choice Manufactured Parts W10440786CM Washer Suspension Rod Kit (Pack of 4) Replaces W10440786

    W10440786CM Washer Suspension Rod Kit Suspension Kit  Fits Whirlpool Cabrio and Maytag Bravos washers. 27 5/8" rods, set of four. Replaces Part Numbers:W10440786, W10368626, W10368627, W10440739, AP5306960, PS3502193.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

    $65.00 $40.65

  • Supco 3804FFSS Stainless Steel Braided 6ft. 3/8" Washer Inlet Water Hose  Parts-O-Matic

    Supco Supco 3804FFSS Stainless Steel Braided 6ft. 3/8" Washer Inlet Water Hose

    Supco 3804FFSS Stainless Steel Braided 6ft. 3/8" Washer Inlet Water Hose Four foot Stainless Steel inlet/fill hose for washers. Both ends have a straight female hose fitting. Pressure tested and designed for durability, strength & safety. Features ¾" GHT nut, accepts standard hose washers Braided stainles over EPDM tube Brass Furrule Washers included 4Ft - 3/8" Connection: Female / Female Connection Size: 0.75"   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

  • Sale -54% W10780045CM Washer Suspension Rods Replaces W10780045  Parts-O-Matic

    Choice Manufactured Parts W10780045CM Washer Suspension Rods Replaces W10780045

    W10780045CM Washer Suspension Rods 24" long rod assembly, set of 4. Fits specific Kenmore, Maytag, Whirlpool top load machine models. Replaces Part numbers: W10780045, W10780053, W10645652, W10537442, W10537443, W10622030, W10748953, W10748955, W10821951, W10821956, AP5971396, PS11703288. Description: This Suspension Rods are replacement parts for specific Kenmore, Maytag, Whirlpool washing machine models. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.   This is an aftermarket part that can be used as a replacement for the OEM part. 

    $62.90 $28.99

  • Sale -56% ERP W10192995 Washer Door Lock Replaces WPW10192995  Parts-O-Matic

    Exact Replacement Parts ERP W10192995 Washer Door Lock Replaces WPW10192995

    ERP W10192995 Washer Door Lock and Switch Assembly Replaces Part Numbers:WPW10192995,  W10192995, AP6016671, PS11749964.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

    $88.00 $38.90

  • Sale -48% WPW10212598CM Washer Water Valve Replaces WPW10212598  Parts-O-Matic

    Exact Replacement Parts WPW10212598CM Washer Water Valve Replaces WPW10212598

    WPW10212598CM Washer Water Valve 120V, 60Hz, single coil hot water valve. Replaces Part Numbers:  WPW10212598, W10212598, 1551648, OEM18051530, AP6017175, PS11750470. Description: This Valve is a replacement part for specific Whirlpool washing machine models. This valve is responsible for controlling the flow of water into the washing machine during various cycles and operations. Causes of a bad valve can include mineral or sediment buildup restricting water flow, worn seals or diaphragms allowing leaks, or mechanical failure of internal components.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

    $51.20 $26.50

  • Sale -30% W11168740 - W11168743 Washer Water Valve Set for W11127357  Parts-O-Matic

    W11168740 - W11168743 Washer Water Valve Set for W11127357

    W11168740 - W11168743 Washer Water Valve Set for W11127357 Cold and Hot Washer Water Inlet Valve Housing and Wire Harness not included. Fits Kenmore, Maytag, Whirlpool top load washer models. Replaces Part Number:W11168740, WPW10240949, W10240949, W10921514, AP6285450, PS12348073, W11127357, W11127357, W10678672, W10678676, W10849466, W10921581, W11085642, AP6261887, PS12347475, W11168743, WPW10240948, W10240948, W10921515, AP6327638, PS12348074. Description: This Water Inlet Valve set is a replacement part for specific Kenmore, Maytag, Whirlpool washing machine models. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. Common causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals.    This is an aftermarket part that can be used as a replacement for the OEM part.

    $68.90 $47.90

  • Sale -33% ERP WH1X2026 Washer Drive Belt Exact Replacement Parts

    Exact Replacement Parts ERP WH1X2026 Washer Drive Belt

    ERP WH1X2026 Washer Drive Belt Replaces part Numbers: WH1X2026, WH01X1249, WH01X1904, WH01X2026, WH1X1249, WH1X1904, WH1X2026R, AH270803, EA270803, LB120, AP2044592, PS270803.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

    $16.50 $10.99

  • Sale -44% LP1585L Washer Drain Pump Replaces DC96-01585L  Parts-O-Matic

    Supco LP1585L Washer Drain Pump Replaces DC96-01585L

    LP1585L Washer Drain Pump Replaces Part Number:  DC96-01585L, AP5582209, PS4217041.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

    $97.50 $54.50

  • Sale -43% DC90-10128NCM Washer Temperature Thermistor Replaces DC90-10128N Choice Manufactured Parts

    Choice Manufactured Parts Choice DC90-10128N Washer Temperature Thermistor

    DC90-10128N Washer Temperature Thermistor - Compatible with Samsung, Kenmore Washers Product Description Ensure accurate water temperature control with the replacement DC90-10128N Washer Temperature Thermistor. This thermistor is designed for select Samsung and Kenmore top-load washers, monitoring and regulating water temperature for optimal washing performance. It addresses issues like incorrect water temperature, no heat, or error codes, offering a cost-effective alternative to OEM parts. Note: Includes one thermistor with mounting plate, 6-inch cord, and two-pin connector. Disconnect power before installation. Replaces part numbers: DC90-10128N, 2073126, DC90-10128H, LP10128N, PD00005870, EAP4214274, AP4579189, PS4214274. Compatibility: Compatible with models including but not limited to: Samsung: WA19J3000AW/AX, WA40J3000AW/A2, WA400PJHDWR/AA, WA422PRHDWR/AA, WA456DRHDSU/AA, WA456DRHDWR/AA, WA45H7000AP/A2, WA45H7000AW/A2, WA45H7200AP/A2, WA45K7600AW/AA, WA45M7050AW/A4 Kenmore: Select top-load models requiring DC90-10128N Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung and Kenmore top-load washers. 🌡️ Specifications: replacement thermistor, two-pin connector. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves incorrect water temperature, no heat, or tE error codes. Product Specification Part Number: DC90-10128N Component Type: Washer temperature thermistor Material: Plastic and metal Mounting: Two-pin connector, 1-1/8" between mounting holes (center to center) Operating Conditions: Suitable for washer water environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer performing optimally today! Add to cart now for a budget-friendly fix!

    $22.67 $12.99

Clothes Washer Parts

🧼 Washer Parts – Reliable Replacements for Smooth & Clean Cycles

A broken washer doesn’t mean a new machine — it means it’s time for quality replacement parts. At Parts-O-Matic.com, we carry a full selection of washer parts to restore the performance, efficiency, and reliability of your top-load or front-load washing machine. From drain pumps to agitators, you’ll find everything you need to fix common problems — and we’ll ship it to you Fast and Free anywhere in the U.S.

We stock parts compatible with Whirlpool, Maytag, GE, LG, Samsung, Frigidaire, Amana, Kenmore, and more.


🔧 Popular Washer Replacement Parts:


🔍 Signs You May Need Replacement Washer Parts:

  • Washer won’t start or spin
  • No draining or water leaking from the unit
  • Washer is noisy, off-balance, or vibrating during spin
  • Error codes or incomplete cycles
  • No water filling or incorrect water temperature

✅ Why Shop Washer Parts at Parts-O-Matic?

✔️ Model-specific parts for a precise fit
✔️ Fast and Free U.S. shipping – no order minimums
✔️ OEM-quality and dependable aftermarket parts
✔️ Easy installation for DIY users and pros
✔️ Friendly support team to help you find the right part


🛒 Get your washer working again with affordable, high-quality parts from Parts-O-Matic.com — where every part ships fast and free.

© 2025 Parts-O-Matic,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account